Overview of Biomass Energy Technologies

A wide range of bioenergy technologies are available for realizing the energy potential of biomass wastes, ranging from very simple systems for disposing of dry waste to more complex technologies capable of dealing with large amounts of industrial waste. Conversion routes for biomass wastes are generally thermo-chemical or bio-chemical, but may also include chemical and physical.

Thermal Technologies

The three principal methods of thermo-chemical conversion corresponding to each of these energy carriers are combustion in excess air, gasification in reduced air, and pyrolysis in the absence of air. Direct combustion is the best established and most commonly used technology for converting wastes to heat.

During combustion, biomass is burnt in excess air to produce heat. The first stage of combustion involves the evolution of combustible vapours from wastes, which burn as flames. Steam is expanded through a conventional turbo-alternator to produce electricity. The residual material, in the form of charcoal, is burnt in a forced air supply to give more heat.

Co-firing or co-combustion of biomass wastes with coal and other fossil fuels can provide a short-term, low-risk, low-cost option for producing renewable energy while simultaneously reducing the use of fossil fuels. Co-firing involves utilizing existing power generating plants that are fired with fossil fuel (generally coal), and displacing a small proportion of the fossil fuel with renewable biomass fuels.

Co-firing has the major advantage of avoiding the construction of new, dedicated, waste-to-energy power plant. An existing power station is modified to accept the waste resource and utilize it to produce a minor proportion of its electricity.

Gasification systems operate by heating biomass wastes in an environment where the solid waste breaks down to form a flammable gas. The gasification of biomass takes place in a restricted supply of air or oxygen at temperatures up to 1200–1300°C. The gas produced—synthesis gas, or syngas—can be cleaned, filtered, and then burned in a gas turbine in simple or combined-cycle mode, comparable to LFG or biogas produced from an anaerobic digester.

The final fuel gas consists principally of carbon monoxide, hydrogen and methane with small amounts of higher hydrocarbons. This fuel gas may be burnt to generate heat; alternatively it may be processed and then used as fuel for gas-fired engines or gas turbines to drive generators. In smaller systems, the syngas can be fired in reciprocating engines, micro-turbines, Stirling engines, or fuel cells.

Pyrolysis is thermal decomposition occurring in the absence of oxygen. During the pyrolysis process, biomass waste is heated either in the absence of air (i.e. indirectly), or by the partial combustion of some of the waste in a restricted air or oxygen supply. This results in the thermal decomposition of the waste to form a combination of a solid char, gas, and liquid bio-oil, which can be used as a liquid fuel or upgraded and further processed to value-added products.

Biochemical Technologies

Biochemical processes, like anaerobic digestion, can also produce clean energy in the form of biogas which can be converted to power and heat using a gas engine. Anaerobic digestion is a series of chemical reactions during which organic material is decomposed through the metabolic pathways of naturally occurring microorganisms in an oxygen depleted environment. In addition, wastes can also yield liquid fuels, such as cellulosic ethanol and biodiesel, which can be used to replace petroleum-based fuels.

Anaerobic digestion is the natural biological process which stabilizes organic waste in the absence of air and transforms it into biogas and biofertilizer. Almost any organic material can be processed with anaerobic digestion. This includes biodegradable waste materials such as municipal solid waste, animal manure, poultry litter, food wastes, sewage and industrial wastes.

An anaerobic digestion plant produces two outputs, biogas and digestate, both can be further processed or utilized to produce secondary outputs. Biogas can be used for producing electricity and heat, as a natural gas substitute and also a transportation fuel. Digestate can be further processed to produce liquor and a fibrous material. The fiber, which can be processed into compost, is a bulky material with low levels of nutrients and can be used as a soil conditioner or a low level fertilizer.

A variety of fuels can be produced from biomass wastes including liquid fuels, such as ethanol, methanol, biodiesel, Fischer-Tropsch diesel, and gaseous fuels, such as hydrogen and methane. The resource base for biofuel production is composed of a wide variety of forestry and agricultural resources, industrial processing residues, and municipal solid and urban wood residues.

The largest potential feedstock for ethanol is lignocellulosic biomass wastes, which includes materials such as agricultural residues (corn stover, crop straws and bagasse), herbaceous crops (alfalfa, switchgrass), short rotation woody crops, forestry residues, waste paper and other wastes (municipal and industrial).

The three major steps involved in cellulosic ethanol production are pretreatment, enzymatic hydrolysis, and fermentation. Biomass is pretreated to improve the accessibility of enzymes. After pretreatment, biomass undergoes enzymatic hydrolysis for conversion of polysaccharides into monomer sugars, such as glucose and xylose. Subsequently, sugars are fermented to ethanol by the use of different microorganisms. Bioethanol production from these feedstocks could be an attractive alternative for disposal of these residues. Importantly, lignocellulosic feedstocks do not interfere with food security.

6 Risks to Prepare For in the Mining Industry

The mining sector is dedicated to the extraction of precious metals and mineral reserves from the earth. The extracted materials are transformed into a mineralized form that serves an economic benefit to both the mining company and the country. However, working in the mining industry has always been dangerous as fatal accidents in mines are a common occurrence worldwide.

mining-industry-hazards

While not all accidents and dangers can be prevented, there are some steps you should take to improve the safety for your workers. Failing to put in adequate safety measures could see you facing serious penalties. Here, we’ll look at 6 risks in the mining industry to be aware of and how to combat them.

1. Dust exposure

While dust may not sound like a particularly harmful risk, it can lead to serious respiratory problems. It is such a common occurrence in the mining industry that it’s been given the term “coal mine dust lung disease”. Some types of respiratory problems cannot be cured, so preventing them is key to your workers safety.

There are numerous dust prevention methods that can be used to combat the issue. Preventing dust from becoming airborne is key and it can be done through water. The type of machinery you use can also determine how much dust is released. Looking at ways to prevent dust build-up is key.

2. Explosions

One of the more serious risks in the industry is the risk of an explosion. This is a particular worry for underground miners. The pipes within underground mines tend to contain flammable gases and chemicals. So, if the ventilation system isn’t maintained, it does pose a risk of an explosion.

Workers should continually check the ventilation system in mines and warning signs should be placed around the mine to remind them of safe practices.

3. Cave ins

There have been a number of cave-ins around the world that have caused devastation within the mining sector. In 2019, 21 miners died in China due to a roof collapse. It is a serious risk that can be difficult to fully prevent. Carrying out regular structural inspections is crucial to maintain the safety of your workers.

4. Electrical hazards

A number of electrical machines need to be used during the mining process. Unfortunately, this increases the risk of shock, fires and falls. If a worker were to get an electric shock, or trip over the equipment, you could end up having to make a large pay-out. You should always have adequate miners’ insurance from Arthur J. Gallagher.

5. Fire

All mines present some kind of fire risk. Even an excess level of dust in the mine can trigger a fire or explosion. The electrical equipment also poses a risk to workers. It’s a good idea to have a fire safety audit carried out before work is undertaken.

6. Noise

Finally, miners are also exposed to high levels of noise. They should be provided with ear protectors to prevent permanent damage. You’ll need to ensure you are providing high-quality protectors for adequate protection.

These are just 6 of the risk’s miners face. It is one of the most dangerous jobs in the world, but there are ways to minimise the risks. Making sure you are adequately insured is important. If your workers are to suffer an accident, they need to know they will be protected. Taking appropriate steps to improve the safety of the workplace is important for both you and your employees.

Pros and Cons of a Solar Powered Generator

The solar-powered generator industry is slowly but gradually expanding. Solar-powered all-in-one portable stations are a modern substitute for traditional fuel-powered generators.

A solar generator is a fantastic way to have additional energy available whenever the light goes out. Whether you need to charge your devices, turn the lights on, or go to a place with no electricity available.

There is a continuous debate on whether these solar-powered generators are superior to traditional generators. In this post, we will examine the pros and cons of solar generators to help you decide whether it is a good option for you or not. But, before we get into it, what exactly is a solar-powered generator?

Pros and Cons of a Solar Powered Generator

What is a Solar Powered Generator

The term “solar generator” is misleading. Solar generators are frequently rechargeable batteries that may be powered by using a solar panel.

The operation of a solar generator differs significantly from that of a normal generator powered by fossil fuel. They have certain technical specifications and very different mechanisms.

A solar generator’s basic configuration includes a rechargeable battery, a solar charger, an inverter, and single or multiple solar panels. Energy is captured through the solar panels, and the solar charger then sends it to the rechargeable battery. Finally, the inverter transforms the DC power into an Ac power supply.

Pros of a Solar Powered Generator

1. Unlimited Solar Energy

Because the sun’s energy is almost unlimited and virtually free of charge, solar panels allow you to access a boundless energy supply. However, it is not entirely free because solar power equipment must first be purchased.

In addition, as compared to diesel or gasoline, solar energy is far more commonly accessible in most distant places. As long as the sun shines, you can never face a shortage of solar energy.

And what to do when the sun goes down? As previously stated, solar-powered generators usually have all-in-one power stations, which means you can also charge it through other sources. Aside from solar energy, the primary power sources are conventional alternating current (AC) energy from a wall outlet or by a vehicle through the CIG connection.

2. Low Running Expenses

Another economic benefit of solar energy is that it is not susceptible to dramatic price changes like diesel or gasoline. Once you’ve purchased the solar power system, your ‘fuel’ expenses will be consistent.

A solar generator has very low operating expenses than a portable generator fueled by gasoline. You do not need to purchase fuel because solar energy is free to absorb, and you do not need to change any oil.

solar battery storage

The absence of moving components also lowers the possibility of requiring replacement or repair for the spare parts. So, while solar generators require a larger initial cost, their operating expenses are lower than conventional portable generators powered by fuel.

3. Eco-Friendly Alternative

The traditional gasoline-powered generator emits toxic fumes containing carbon monoxide, which is a severe health hazard, and that is why they should only be operated outdoors where you can keep them at a safe distance from other people and structures. Solar-powered generators emit no toxic fumes, making them the safest alternative, even suitable for interior usage.

Cons of a Solar Powered Generator

1. High Initial Cost

Solar generators are significantly more expensive to purchase than standard gas generators. Solar-powered generators, on the other hand, have significantly reduced running expenses. As a result, you will spend less money during the lifespan of your solar generator.

2. Limited Energy and Output

You can only recharge your solar-powered generator’s batteries when the sun is out. Although we do have other alternatives for charging them, it takes a lot more time than a fuel-powered generator. A standard solar generator will take almost six to eight hours to fully charge and provide a 100 watts output. As compared to that, you do not need to recharge a gas generator. You refuel them, and they are good to go!

Your energy output also depends on the size of your solar-powered generator. The size and weight restrict how much solar energy it can absorb and how much electric output it can provide you. Your solar generator cannot supply electricity to an entire house. It can be used for small appliances, charging devices, and for a limited time.

To put it simply, the weight and size of your solar generator are proportional to the amount of power it can retain. You can use a solar power generator as a compact alternative for moderate use. So, if you wish to use an output of 1500 watts or more, you should probably opt for an inverter generator as a lightweight option.

Now that you are aware of the pros and cons of solar generators, you will have a clear idea of which one to buy and whether you should buy it or not. Good luck!

7 Benefits of Hiring a Commercial Cleaning Service

Many business owners shy away from hiring commercial cleaners, as they have concerns about the costs. A small business may not want to invest a significant portion of its budget into keeping its establishment clean.

The mistake that businesses make is to assume that paying for commercial cleaning services is a net loss. Between proven cleaning methods and attention to detail, there are many advantages to hiring professionals for cleaning.

Below are seven reasons why you must hire commercial cleaners for your business.

Benefits of Hiring a Commercial Cleaning Service

1. Maintain a Sleek Aesthetic

Businesses that prioritize cleanliness have a much easier time maintaining a sleek and modern aesthetic. If you are running a business that aims to target Millennials and Generation Z customers, crafting a sleek and stylish aesthetic is so important.

Such aesthetics are very difficult to maintain if your workspace is untidy, dirty, and unhygienic. Rather than appearing modern and sleek, your business may look chaotic and claustrophobic. While such appearances may have been acceptable in the past, modern customers may not find them particularly appealing.

2. Impress Customers and Clients

When you are running a business that depends on daily interactions with customers or clients, you must prioritize cleanliness. If someone walks into your store, restaurant, or office first thing in the morning, they should see a spotless environment.

Perhaps a customer is unsure of where they want to shop, and they take an interest in your store. They walk inside and immediately notice areas of the floor that have a great deal of dust and debris. Such an appearance does not create a positive impression, and may even cause them to turn around and look for a different place to shop.

3. Avoid Liabilities and Risks

Commercial cleaners are very thorough in their work, while they also keep up to date on the latest OSHA compliance and state health standards. Your business does not have to concern itself with cleaning standards, as your cleaners will take care of that for you.

commercial cleaning services

Many business owners make the mistake of delegating the cleaning of an establishment to specific employees. While those workers may do their best, they are unlikely to know the latest OSHA standards and compliance. That means your business could suffer consequences when your annual health inspection comes around.

4. Retain and Attract Employees

The state of the economy in the United States is extremely precarious in 2021 and beyond. Despite the impressive performance of the stock market and housing market, many businesses are still struggling to reach the same levels of business as pre-2020.

In addition, many workers are not showing a great desire to get back to work. Others are a lot more cautious about committing to a workplace, and will not hesitate to change jobs if they believe a better alternative is available.

Business owners must ensure they can both retain existing employees and attract new workers in such an environment. Maintaining a clean business is one way to project your company in the best possible light.

If a prospective employee comes in for an interview, they are likely to look through the various areas of your business. Should they notice dirty corners in certain rooms, messy communal spaces, and other issues, they are far less likely to take up a job at that establishment.

5. Avoid Business Shutdowns

Companies that are not making cleanliness a priority are taking a significant risk in 2021. There are countless stories of businesses that had to shut down for several days due to a virus outbreak among their staff.

Not only do such outbreaks cause your business to lose money, as you must shut your doors for a few days or weeks, but you may develop a poor reputation among the local community. If people hear that your business shut down due to a virus outbreak, they will be more hesitant to frequent your establishment in the near future.

The cost of hiring cleaners to spend a couple of hours at your business each day of the year is likely to cost less money than a few days of your business being closed down due to health issues among staff. Similar shutdowns are possible if you fail annual health inspections.

6. Lighten the Load on Your Staff

Considering the changes occurring in 2020 and 2021, many businesses are placing greater workloads on their staff. Most workers already have many tasks they must handle each day, which means that adding cleaning into that workload could overwhelm your employees.

Rather than doing a great job cleaning your business premises, those workers may look to cut corners in every area of their job. As they are tasked with so many different responsibilities, they may attempt to do the bare minimum with each task. That could result in your business not receiving the care it deserves.

If you are overworking your employees, their stress and tension may spill over into interactions with customers. That is not how you want your business to appear to a customer, whether they are coming in for the first time or are a regular visitor.

7. Save Money on Cleaning in the Long-Term

Business owners assume that if they are hiring a cleaning company one or two times a week, they are likely to spend a lot of money on cleaning in the long term. In contrast, hiring professionals for a deep cleaning one time a month can save money.

The Future of Cleaning

What many people do not realize is that hiring commercial cleaners for regular cleaning is cost-effective over time. If cleaners are constantly at your business mopping the floors, vacuuming, spot cleaning surfaces, and ensuring your bathrooms are thoroughly disinfected, then you will not require major cleaning at any stage.

Every area of your business receives priority from the cleaners during each of their visits, ensuring the entire business is spotless when they leave. In contrast, a company that only hires professionals one or two times a year may end up with excessively dirty surfaces, floors, and carpeting. Some of the dirt or debris may not come off easily, which can increase the cost of cleaning significantly.

Save Money with Sustainable Gardening

If you’re looking for ways to create a sustainable and energy-efficient home, make sure to consider your gardening practices. Gardening is a great way to produce your own fruits and vegetables. If you’re gardening, you’re already helping to reduce plastic waste because your food is coming right from your backyard rather than from the store.

You can become even more green by practicing sustainable gardening! Sustainable gardening uses principles and practices that help to protect the environment without doing further harm. It embraces organic gardening methods, conserves resources, and substitutes harmful practices (such as using pesticides) with more eco-friendly practices. And not only is it good for the environment, but it can also help save you money!

Here are 5 ways you can begin using sustainable practices in your own garden.

Reduce energy use

When planting and maintaining your garden, look for ways that you can be more energy efficient and create less pollution. For example, instead of using gas or electric-powered tools, look for tools that you can use by hand. Using a cheap cordless battery powered drill instead of an electric powered drill. Dig with shovels, clip with pruners, weed by hand.

Another way to reduce energy is to consider how you’re protecting your garden. Some people like to put an electric fence around their garden to keep out deer and other animals. Electric fences use painful electric shocks to deter animals from entering; depending on the setting of the fence, these shocks can be harmful to wildlife, pets, and humans. Instead of an electric fence, use a metal fence. A metal critter fence saves energy, is more cost-efficient, and does not harm animals. Another alternative is to install a wooden fence in order to protect your precious greenery.

Conserve water

Water is a precious, limited resource. Instead of watering your garden from a hose, create a collection system out of rain barrels. A rain barrel system collects runoff from your gutters when it rains. It is advisable to use aluminium guttering as aluminium has very strong rust resistance.

You can empty the water from the container as needed to water your garden and other areas of your lawn. Sometimes we water the plants too much than needed. It also helps a lot in saving water that we know how much or when to water our plants. There are freely given learning materials about this all over the internet. One place in particular, the Occupy The Farm website, gives simple yet detailed guides regarding this.

You should also keep in mind that runoff from your garden makes its way back into the water supply. Herbicides or pesticides contain harmful chemicals that can contaminate our water. Using natural herbicides or pesticides, such as vinegar, can still help kill weeds and prevent pests without harming the environment.

Make your garden a habitat

Sustainable gardening can help you create a backyard wildlife habitat. Even if you’re hoping to keep larger animals out of your veggies, there is a way to open up your garden to smaller critters. There are certain plants you can grow that will help provide food and shelter to animals such as bees, butterflies, and birds. Habitats will vary by area.

Grow native plants

Growing plants that are native to your area means that the plants will naturally thrive in their environment. They’ll do well in the existing light, moisture, and soil conditions so you won’t have to put as much effort into taking care of them. Another reason to grow native plants is that they won’t disrupt the ecosystem. Non-native plants can seed and spread to surrounding areas and prevent native species from growing.

You can save seeds from your plants from season to season. For example, if tomatoes are native to your area and did well in your garden, save the seeds from one of your tomatoes to plant again next year. Some people also like to scout out woods and fields near their home for native plants that they can seed in their own garden.

Start composting

Composting is good for you and for the environment! When you compost waste, there is less material going into the landfill. That waste then creates an organic material that you can use in your garden. Compost helps maintain soil quality and fertility, serves as a natural fertilizer,  increases water retention, and improves plant growth.

benefits-composting

It is easy to start composting. There are a few different types of composters you can buy or create. Enclosed bins are the most practical method for most home gardeners. The type of materials you can compost will vary slightly depending on your composting strategy. In addition to various types of food waste, you can also add yard waste such as leaves or grass clippings.

Conclusion

Sustainable gardening practices don’t just help you save money, they help you protect the environment. Look over your current gardening practices to see if there are ways that you can reduce the amount of energy you’re using, if there are ways for you to produce less waste, and if there are ways you can help your local ecosystem.

3 Energy-Saving Practices When Air Conditioning Is A Must

The summer season offers a plethora of fun and exciting activities. It’s the perfect time to soak up the warm weather, have backyard cookouts with family, head to the beach, or host a pool party at home.

While these are things to look forward to, some people choose to stay at home to avoid the scorching heat outside. This can be true, especially for people living in tropical regions. In turn, this would compel them to stay at home and turn on their air conditioners (AC) to cool their interiors and boost comfort.

Energy-Saving Practices When Air Conditioning

Practical Ways To Save On Energy Costs

Regardless of any setting, air conditioning units continue to be one of the biggest energy consumers. Running your cooling system nearly every day can result in increased electricity bills. Gladly, there’s an array of ways that you can do to reduce your worry about your inflating expenses.

If you own a few residential spaces, commercial air filtration systems can unclog dirty air filters that take nearly half of your average monthly bills. With this, you can save money in the long haul and ensure your AC systems’ efficiency while keeping your premises smelling fresh and pleasant.

Apart from cleaning your air filters, below are other simple energy-saving practices to stay within your budget during the summer months. Whether you’re a homemaker or a business owner, these strategies will certainly help you cut down costs without compromising comfort.

1. Minimize Or Reschedule Heat-Producing Activities

The humidity level outside can affect and increase the temperature inside your home, resulting in extra heat. While it can be easy to force your air conditioning systems to work harder, consider minimizing heat-producing activities inside.

Instead of cooking on the stovetop or oven in the kitchen, opt to microwave your food outside. Upon creating your weekly meal plans, try no-cook dishes. From fresh salads to hummus bowls, there are plenty of easy recipes online, which can add variety to your meals. Also, since the summer months are the perfect time for outdoor cookouts, use this time to grill your food.

stainless-steel-kitchen

Alternatively, you can reschedule doing your typical household chores. For instance, opt to iron your clothes during the evening, in the wee hours of the morning, or when the temperatures have dropped. Likewise, do your laundry, run your dryer, and use your dishwasher during the same off-peak, cooler hours. These small changes can significantly help you control the heat buildup inside and avoid overworking your air conditioners during the day.

2. Use Your Fans

Electric fans consume less energy compared to air conditioning systems. Considering this, use your fans to get the most out of the cool air from your AC appliance. Start by switching them on to push the hot air out, then turn your air conditioning unit on to enjoy a wind-chill effect.

When placed strategically, your desk or ceiling fan can efficiently regulate the temperatures in your living areas and allow the breeze to move through. In this way, you can keep your home and workspaces cool without having to push your AC to overwork.

However, make sure to switch off your fans when you’re not using them to cut down your energy bill. Alternatively, invest in energy-efficient fans that are equipped with sensors. These smart appliances can detect if there’s a need to boost the cool air in your space. When the area is adequately cold, it automatically turns off. Apart from saving money, these high-tech appliances can contribute to sustainability.

Moreover, these innovations can also be useful in businesses. Well-ventilated workspaces could improve employee well-being, boost productivity, and even increase client morale.

3. Seal Your Doors And Windows

Another easy energy-saving practice you can start today is to seal the gaps in your windows, add caulk around the cracks in your doors, and shut them tightly so the cold air won’t leave your living areas.

The sun’s heat can compel your AC system to work harder to regulate the temperatures inside. Hence, as you turn on your AC, make sure to pull down your drapes and close your blinds to block outside heat from entering your spaces. Savvy management of your window treatments can decrease the load on your air conditioning units, which in turn, helps you save electricity.

clogged filter of AC

These practices might seem simple, but doing these activities can keep your areas adequately cool, especially during the hottest part of the day.

Summing It Up

By cleaning your air filters, rescheduling your household chores, placing your fan strategically, and closing the gaps in your windows, you can keep your areas well-ventilated and comfortable. When you need to crank up your AC, these minor lifestyle adjustments can certainly help you cut down your energy bills.

4 Ways To Shift Your Business To Renewable Energy

Going green is a viable business strategy if you’re looking for ways to become a sustainable brand. Doing so won’t only significantly reduce costs but may also potentially attract new customers and supporters. That’s why it’s no longer a surprise when entrepreneurs are considering renewable energy in powering up their companies. This isn’t impossible to achieve thanks to technology, especially if you’ve done enough research and you’re in it for the long haul.

Renewable energy isn’t difficult to understand. It means collecting useful energy from sources that are renewable and won’t be depleted even when used constantly.  These include solar or wind power. The process involves continuous replenishment of energy, which you can take advantage of as a business owner. Depending on how flexible you are as a company, shifting to renewable energy might just be one of the best investments you could make.

No matter what your goal may be for making the switch, here are some ways you could start turning to renewable energy for your enterprise.

Ways To Shift Your Business To Renewable Energy

1. Know Your Options

As there are different types of renewable energy sources, doing your research is a good starting point.  This is for you to know your options and make a decision accordingly. If your facility has considerable roof space, you may consider turning to solar energy.  This turns the sun’s energy into electricity that you can use for your business. If you’re from Florida, solar companies in Miami like Airis Energy Solutions and others would be more than willing to have a discussion.  This may include how you can take advantage of the infinite benefits of the sun and its energy.

Florida is a good location considering its adequate exposure to sunlight. To add, being in the US qualifies your business for a tax credit.  This is in return for using renewable energy for your business power needs. Aside from solar power, you could also tap into other energy sources such as commercial wind from turbine blades, hydroelectricity, and biomass from organic matter.

2. Weigh The Cost Vs. Benefits

As a business, one of your priorities is to make sure every cost should justify the benefits you’ll gain out of an investment. Since you’re considering shifting your business to renewable energy, it’s essential to realize and analyze the cost of each of your options.  By doing so, you could decide better. Solar panels, for example, may come with a hefty upfront cost. However, if you think about the return of investment it can potentially give, it’s something to consider.  Also. many panels have around 20-25 years of warranty in them.

On the other hand, micro wind turbines may be cheaper, but their lifespan is shorter. You could opt for larger sizes, but of course, you also need to consider the space you have. Additionally, it requires maintenance and the environmental permits you may need to obtain from your local government or municipality’s office.

3. Turn It Into An Advocacy

Going green is brilliant advocacy that won’t only allow you to save on electricity costs. To add, you can attract more customers and supporters.  You may do this if you amp up your public relations and highlight how you’re trying to make a difference in saving the planet. No matter how small the impact may be, it feels good knowing you can contribute to the environment. For sure, your customers would also be more motivated to spend money on a brand that cares.

green entrepreneurship

4. Involve Your Employees

Environmentally conscious advocacy isn’t just something you can impose on the organization. You need to ensure your employees are educated and informed about.  This is needed so you can all work together in achieving the goal. Doing so will encourage everyone on the team to support the cause.

Aside from renewable energy sources, you can also consider adopting a sustainable and eco-friendly approach in the workplace. You could provide learning materials that’ll teach everyone how to conserve energy. Also, you may come up with recycling programs that could potentially reduce commercial wastes. A paperless office can also go a long way in going green for your business. For example, using a paystub will allow you to deliver paystubs digitally, therefore saving on paper which preserves energy. Check out the best paystub generator free to save on money and the environment.

Involving the employees, staff, and colleagues is a positive experience that can surely help you achieve a desirable and sustainable outcome for the company.

Conclusion

Shifting to renewable energy is something that all businesses should consider, no matter the size and nature of the industry. With the planet’s resources slowly but surely depleting, it’s about time to think of ways to contribute.  If all establishments and workplaces would start to feel like this, all efforts won’t surely be wasted.

Know your options when thinking of a renewable energy source. Make sure you weigh the cost of investment to determine if it’s worth the benefits. Turn your goal into advocacy, and don’t forget to involve your employees so you can work hand in hand in achieving a common objective.