Beginners Guide for Always Having Hot Water in the Home

The search for a method to obtain fast hot water on demand is a constant quest for homeowners. Although it may not be as ubiquitous as something like the quest for life, the idea of immediate hot water has passed the minds of almost everyone who has ever seen water go down a drain when waiting for the water to heat up has thought about it at some point.

Having to wait for hot water when you need it is a big inconvenience. When you realize how much water will be wasted, it may even make you feel a bit guilty, though perhaps not guilty enough to take an ice-cold shower first thing in the morning.

Lucky for us, there are solutions!. A recirculating mechanism, a demand system, and water heaters in the tank or tankless configurations are the options for obtaining immediate hot water at the tap.

hot water guide

Why Does It Take So Much Time?

Understanding why it may take so long for the water that comes out of the tap to be heated will help us figure out how to obtain immediate hot water. While the age and efficiency of a water heater, as well as the amount of insulation in a home’s pipes all, play a role, the most crucial reason is relatively straightforward:

For the hot water to flow through the faucet, the cold water must first be drained out of the pipes.

Following its release from the heating system, the hot water must travel via a network of pipes before reaching the faucet. In front of the heated water seems to be the water cooling in the cold pipelines since the previous request for warm water.

In certain instances, the distance between the water heater and the faucet is longer than you think. Consider, for example, a typical two-story house in the state of Texas. Depending on how the water heater is placed, it may not take long for the water to get hot at the upstairs taps and showers to switch on. As a result, water may not reach the bathroom and kitchen showers and faucets downstairs for a minute or two. However, the water will eventually reach the desired location. It may take even longer during the winter since the initial gallon of water is chilled as it passes through the freezing pipe system.

What are Your Options?

Because each homeowner’s requirements vary, there is no “one size fits all” solution. However, there are four methods for getting immediate water from the faucet.

1. Water Heaters That Recirculate Water

Using a conventional tank heating system, turning the knob at the faucet begins the hot water traveling through the pipes. However, if the water in the pipes has already been heated by the time you turn the tap on, hot water is available at the tap instantly.

A recirculation system links the furthest point of a drainage system returning to a water heater using a plumbing pipe devoted to providing hot water just to that point. Because hot water is constantly cycling through the system, it is instantly accessible at every faucet.

The most significant advantage of the system is that hot water is available immediately at every shower head and faucet, which saves time and reduces water waste. In addition, recirculation systems are frequently triggered by a thermostat, which activates the mechanism when the water temperature falls below a certain threshold. These systems may also be triggered by a timer that can switch off the system during periods when the house is vacant or when hot water is not required, thus saving money on energy costs.

2. Systems for On-Demand Hot Water

When purchasing a new house, a buyer may request that the drainage system be built with a recirculation system, which necessitates installing a dedicated hot water loop. On the other hand, a recirculating system is impossible unless your home is already plumbed for it.

On-demand hot water systems are cold and hotlines connected to a pump located beneath the bath or kitchen faucet located the furthest away from the water heater. It is possible to have the chilly water that usually goes down the drain recirculated back to the water heaters by pressing a button. The water heater’s output is delivered to a faucet by pressing a button as well.

As soon as the water temperature at the furthest fixture reaches the desired temperature, the pump will shut off since the water pipes will have been filled with water.

3. Tankless point-of-use Water Heaters

Tankless water heaters like the Ecosmart Eco 11 this water heater only works when there is a need for hot water to be provided. However, unlike tank water heaters, which store hot water to be delivered to a faucet on demand, a tankless water heater begins operating immediately upon turning the tap on.

Cold water is conveyed via a conduit into a tankless water heater, which subsequently warms the water using an electric element or a gas burner.

In contrast to tank water heaters, tankless water heaters are assessed by the number of gallons of water they can heat in one minute rather than by storage capacity.

A tankless point-of-use water heater, like a traditional water heater with a tank, may deliver almost instantaneous hot water due to its proximity to the fixture that requires hot water. However, while tankless water heaters are more energy-efficient than tank water heaters, it should be noted that they do not deliver hot water as fast as tank water heaters since there is a delay of several seconds between when the water is heated and when it reaches the desired temperature. Furthermore, all tankless point-of-use water heaters are electrical, which warms water at a slower rate than natural gas heaters.

4. Tank point-of-use Water Heaters

Exactly as the name implies, a point-of-use heating system provides a supply of hot water that is placed exceptionally near to where a sink, shower, or bathtub is located. It is common practice to utilize point-of-use water heaters to heat water at fixtures located a considerable distance away from the home’s tank water heater. Aside from that, they may be used to heat water at a location where instant hot water is most required or handy.

A tank point-of-use heating system is similar to a conventional whole-home tanks water heater, except that the water tank is much smaller in capacity. Tank point-of-use heating systems are available in various capacities ranging from 2.5-20 gallons, determined by the amount of hot water required. Their ability to provide rapid hot water is enhanced because they reduce the distance that water must travel before reaching its destination. Instant hot water saves a lot of time, water, and money by eliminating the need to wait.

Additional Suggestions

Water Pipes should be insulated

Insulate the area surrounding hot water pipes to prevent heat loss while the water is transported to the faucet. It will also help keep the pipelines warm for longer, which will be helpful the next time you want hot water.

Now, will this provide you with immediate hot water? No. However, it will save the amount of time you have to queue for hot water at the faucet, and it may help lower your energy costs.

hydrogen-boiler

Preventative Maintenance

It is essential to maintain a heating system, whether a tank or a tankless one, to extend its life span. However, a hot water tank that is not operating at peak efficiency may need a longer time to provide the hot water that you require. For a tank water heater, which is still the most common type of water heater used by most American homeowners, annual upkeep that includes checking the anode rod, flushing the tank, and running tests on the temperature and pressure (T&P) valve helps to ensure the safety and efficiency of the water heater.

Consult a Professional Plumber

Installing a recirculation system should be done by a skilled plumbing professional. In addition, the other alternatives for obtaining immediate hot water at the tap all require specialized knowledge and equipment.

Always use a qualified plumbing expert to install your water heater since poorly placed water heaters may be hazardous and pose a risk of exploding or igniting a fire.

Conclusion

We have all experienced the frustration of waiting for hot water, whether at the sink or in the shower. Often, some delay is required, but when it occurs frequently enough, the time and stress accumulate. Point-of-use water heaters are available in both tank and tankless configurations. Both benefit from being located near the location where they deliver hot water, removing the need to wait for the water to travel via pipes to become heated.

Many alternatives are available if you are looking for methods to obtain immediate hot water from the faucet. Now that you have a better understanding of the options, speak with a certified plumbing expert who can assist you in determining which option is best for your house and perform a skilled installation that guarantees the safety of both you and the family.

About Salman Zafar

Salman Zafar is the CEO of BioEnergy Consult, and an international consultant, advisor and trainer with expertise in waste management, biomass energy, waste-to-energy, environment protection and resource conservation. His geographical areas of focus include Asia, Africa and the Middle East. Salman has successfully accomplished a wide range of projects in the areas of biogas technology, biomass energy, waste-to-energy, recycling and waste management. Salman has participated in numerous national and international conferences all over the world. He is a prolific environmental journalist, and has authored more than 300 articles in reputed journals, magazines and websites. In addition, he is proactively engaged in creating mass awareness on renewable energy, waste management and environmental sustainability through his blogs and portals. Salman can be reached at salman@bioenergyconsult.com or salman@cleantechloops.com.
Tagged , , , , , , , , , , . Bookmark the permalink.

3 Responses to Beginners Guide for Always Having Hot Water in the Home

  1. Pingback: Improve Energy Efficiency in Domestic and Commercial Sector

  2. Pingback: How an Eco-friendly Home can Boost ROI When Selling?

  3. Pingback: Top 7 Plumbing Tips for Your Home to Save Money

Share your Thoughts

This site uses Akismet to reduce spam. Learn how your comment data is processed.