What is a Power Inverter?

Basically, they are devices that turn your vehicle battery’s direct current (DC) into alternating current (AC) – the kind of electricity you have in outlets in your house, that are connected to the energy grid. Power inverters are not to be confused with catalytic converters, which control exhaust emissions.

Having a power converter means you can plug in your appliances and devices, and power them like you would through an electricity outlet in a house.

In your car, you can get USB adaptors for your cigarette lighter so that you can charge your phone or plug in your satnav. But for larger gadgets and electronics with proper plugs, you’ll need an inverter.

Working of a Power Inverter

Like we said, they convert currents to a type safe for use in vehicles. Your vehicle’s battery voltage provides a current that powers its internal workings – you’ll need to know which voltage your vehicle’s battery uses to choose the correct inverter.

The current supplied by a battery sticks on one circuit, in one direction – where the name ‘direct current’ comes from.

However, to power your gadgets, you’ll need alternating current, as those electronics need more power to function than the DC can provide. They’re made to function with the high-voltage AC current supplied in homes. If you are wondering ‘how to do my homework‘ to write a high-quality essay on electricity, consider EssayDoc.

Power inverters increase the DC voltage, change it to AC, then use it to power your devices. They amp up your battery’s voltage so you can play video games and use a kettle in your RV. Cool, huh?

Size Selection

These babies come in a variety of sizes – most commonly 1000, 3000 or 5000 watts.

It’s recommended that a 3000 watt inverter is the happy medium between inverter sizes and best choice to get. They’re not too small like the 1000, or too powerful and overcharged like the 5000. If you need a little extra boost, there are 3500 watt capacities available.

We spoke to a representative from Crusader Vans, who has a lot of knowledge on the topic at hand and they said, “The size you choose depends on the watts or amps of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you’ll need (at least 20% more than your largest load).

Determine Continuous Load and Starting (Peak) Load: You need to determine how much power your tool or appliance (or combination of them that you would use at the same time) requires to start up (starting load), and also the continued running requirements (continuous load).” Follow this link to know more about them: https://www.crusader-vans.co.uk/

Modified or Pure Sine Wave Inverter?

Besides the sizing, there are two main types of inverter – the modified sine wave, and the pure sine wave.

So, what’s the difference, and which one will you need?

• Modified Sine Wave: These tend to be cheaper, and less powerful. However, they’re good for most everyday electronics you will want to use, just not very large ones.
• Pure Sine Wave: These are compatible with pretty much all electronics, gadgets, and appliances, and produce a powerful current most like the one supplied by the electric grid. These are the most common choice, because they’re more likely to be compatible with anything you need to plug in.

Other Features and Tips

• Power inverters are especially useful if you are setting up a solar power system – they convert energy from the sun into electricity you can use to power your gadgets within your vehicle. This is renewable energy that isn’t a drain on your best car battery.
• Power inverters aren’t just for vehicles – if you have a small cottage or outhouse, they’re very useful for setting up a small power source there.
• Many (but not all) power inverters come with USB outlets, useful for charging on the road without having to cart around adaptors and large plugs. For ease of use, get one compatible with USB.
• The best inverters have digital screens which show you how much energy has been consumed and information about battery voltage. It’s useful to know these things at a glance, so consider getting one that has a screen.
• Modern inverters, such as a solar inverter, have been made to be extra-quiet, so you won’t be woken up by a noisy machine while trying to simultaneously get some sleep and charge your phone in your RV.

Recommended Reading: Factors affecting the price of a home inverter

The post What is a Power Inverter and Why do I Need One? first appeared on BioEnergy Consult.

The reusable material from the used battery is removed and recycled which reduces the needs for raw materials which is originally imported from abroad. It creates a balance payment and cost. In addition to this there can be considerable environmental impact during mining processes such as emission from smelting of sulfide ore, copper, nickel, and cobalt and this can be eliminated if recycling can be introduced.

Dangers of Lead-Acid Batteries

LABs generally consist of both sulphuric acid and large amount of lead which is not only corrosive but also a good carrier for soluble lead and lead particles. Lead is highly toxic metal which causes a wide range of adverse health effect especially on young children. If one gets expose excessively to lead it can cause damage to brain and kidney, impair hearing, and can led to various other associated problems. On an average an automobile manufactured contain about 12kg of lead, in which about 96% of lead is used in lead acid battery and remaining 4% is used in other applications like wheel balance weight, protective coating and variation dampers.

Both lead and cadmium are harmful for human health and environment. This toxic substances seeps into the soil, groundwater and surface water through landfill and also releases toxins into the air when they are burnt in municipal waste incinerators. Moreover cadmium can be easily absorbed by the pant root and get into the fruits, vegetables, and waters are consumed by animals and human beings, they can fall to prey to a host of ill effects.

Studies have shown that nausea, excessive salivation, abdominal pain, liver and kidney damage, skin irritation, headaches, asthma, nervousness, decreased IQ in children, and sometimes even cancer can result from exposure to such metals for a sufficient period of time.

Need for Effective Control Measures

In a battery recycling plant, effective control measures need to be implemented, both to protect the health of workers and to prevent pollution of the environment. Good plant design, with reduction of the potential for the emission of contaminating substances is of utmost importance and the newer smelting processes are inherently much cleaner than traditional blast furnaces.

Pollution abatement technologies, including the treatment of exhaust gases and liquid effluents, need to be installed. Those mostly exposed to releases within the plants are the workforce. Control measures such as maintaining minimum standards of air quality within the works, medical surveillance of employees, use of protective equipment, and provision of conditions of good hygiene in general, is necessary to avoid occupational lead exposure. However, few government/non-governmental steps have been taken yet; rather this practice is a traditional trading system as prevail in the society.

Positive and Negative Impacts

In developing countries such as Bangladesh, recycling or reusing of used lead-acid batteries has both positive and negative impact on environment. Positive impact is that, if battery is recycled in proper and in sustainable manner it saves environment from toxic material of battery, otherwise battery waste is dumped into the landfills. Negative impact is that if recycling is not done in sustainable manner emits gases produced from battery recycling has adverse impacts on environment and human being.

Direct recycling process should be banned as it has adverse impact on environment. As it is an illegal process, shopkeepers perform this process in hidden way. Government should impose the law and regulation strictly in this occurrence. This information can be used for advertising material highlighting the environmental benefits of recycling or reusing encourages the purchasing of old lead acid battery. It will accelerate the selling rate of old battery.

Importance of Awareness

Necessary steps should be taken to increase awareness about environmental impacts of used lead acid batteries. Proper instruction should be provided among the general mass. It will also increase reusing of old battery. Battery regeneration is a unique process specially designed to revive the lost capacity of batteries and give priority to choose secondary battery. Battery Reuse Centre can be developed for effective reuse and recycle.

The aim to divert reusable battery, donated by the public, which often could have been destined for landfill and instead provides a much needed source of low-cost battery to those in need. The battery reuse service encourages volunteer involvement and trainee placements in all aspects of its operation. Awareness program (posters, pamphlets, TV & radio commercials, road-shows, website, exhibitions, talks), infrastructure, information center, tax rebates for manufacturers should be taken to increase recycling or reusing of old battery.

The post Recycling of Lead-Acid Batteries in Developing Countries first appeared on BioEnergy Consult.

• Aluminum
• Steel
• Paper
• Plastic

Recycling is actually a great way to conserve raw resources and save energy. Recycling at least one ton of paper can save 7,000 gallons of water and 17 trees, according to the Environmental Protection Agency. Hiring a skip would help recycle that amount of paper and you can click here for ideas for ideas on the size of the skip you could employ.

As you see, recycling is an effective and simple way to help the environment. It is something the entire family can do too. Before recycling, call your local waste management services. Determine how to you need to sort and pack items for recycling. In addition, you want to know what day or days the waste management services collects recycling. Check with them to find out where you safely dispose of light bulbs, hazardous materials and batteries. These cannot be recycled or put in the trash.

Your local waste management recycling service has different rules about how items must be sorted, cleaned and packaged. Metal, cardboard, plastics, aluminum, glass and paper can be recycled.

It can be tricky to recycle plastics because some can break down easier than other plastics. The number located on the plastic item will determine if it can be recycled. It will also determine if the plastic can be picked up for recycling.

Source: Fix.com

Although plastics are trickier to sort and recycle, it’s important to dispose of them properly. One important factor to establishing a recycling a program at work, school or home is to create a system that works for everyone. Here are a few ways to recycle at home:

Source: DIY Swank

Recycling is about convenience, convenience, and more convenience! When incorporating a successful program about which you can read in the essay about recycling, make bins easily accessible. They should be in an area that is easily visible and used like the utility room or kitchen where they can be seen and used

Source: Better Homes and Gardens

Now, if you need a simple recycling system everyone can follow (even kids), use caster and baskets. These are easy to access and use. They slide out of site when not in use.

Source: Family Handyman

Use space by going vertical. You can hook bins on walls to utilize space. It will be easy to sort and store.

Source: Sweet Haute

Another way to make a successful recycling program is to make it fun. Use stylish bins and trash cans to recycle items.

Source: Sweet Haute

Another way to make a successful recycling program is to make it fun. Use stylish bins and trash cans to recycle items.

You may not have time to personally decorate trash cans by spray painting them. How about using printable labels. These labels can go generic bins to help separate recyclables.

Source: Lil Blue Boo

Batteries are not to be recycled. They cannot be put into a trash can for non-recycling either. Instead, they should be properly thrown away at a collection center or a participating auto part store. The same thing should be done with light bulbs.

Make a special area of your home or office to use as a personal sorting center. This is where you can sort and clean recyclables. You may want to look at some personal recycling centers to get an understand of what you need.

Source: I Should Be Mopping the Floor

Many people do not have an area they can keep bulky recycling or trash in the home or office. If this is the case for you, create a dedicated spot in the garage or other area. It won’t take long before your family or co-workers are pitching in to recycle.

Recycling is full of great ideas to help the environment. Find the ones you like. Used them in your successful recycling program.

Useful Resources

The post 11 Ideas for Easier Recycling at Home first appeared on BioEnergy Consult.