1. Get A Free Energy Audit

A full energy audit helps identify issues that might be causing energy wastage – these include insulation issues and air leaks. Most electricity utility companies offer these audits free of charge. The inspection not only helps you determine how energy is used but also ways to address energy wastage.  The audit report will also recommend ways to keep your energy usage on the low, such as investing in energy efficient lighting and equipment.

2. Invest in Energy-Efficient Office Equipment

Energy efficient (energy-star rated) appliances use up less energy as compared to older non-rated ones. That said, it would be advisable for you to lease/buy energy star rated office electronics.  This should help see your energy bills drop significantly, hence substantial cost savings in the long run.

3. Avoid Peak Demand

Peak demand can be defined as the time of the day when there’s a high demand for energy. These are the hours when energy usage is the highest. The typical peak hours start from 9 a.m. to 5 p.m.  Reducing your demand for electricity during these times and only running the factory and heavy equipment early in the morning, and later in the evening can help reduce energy consumption. Reducing your demand for energy during peak hours also means your small business spends less on energy usage at the end of the day.

4. Use Programmable Thermostats

Smart thermostats make it easy to monitor and control temperatures in the workplace when everyone is in the office (9 – 5), and away. The thermostat can be programmed to turn OFF the heating and cooling appliances during the night, and back ON a few minutes to ‘work hours’. This in return sees you save lots of energy that would have otherwise been wasted had the HVAC systems remained on through the night.

5. Switch Off Lights in Unused Areas

Most offices have an always-on lights setup. This means the lights in all rooms including bathrooms, conference rooms, breakrooms, and even unused corridors. This leads to energy wastage which can be preserved if lights were only turned on when needed. Installing sensors to turn the lights on or off when required could help too.

6. Switch to Energy-Efficient Light Bulbs

Incandescent bulbs use up more energy for the same amount of light when compared to CFLs and LEDs that use just a fraction of it. Switching from incandescent bulbs to CFL or LEDs should help the company use less energy in lighting. This is the simplest and easiest ways to save energy in the workplace.

7. Make Use of Natural Light

Always take advantage of the natural sunlight whenever you can. You can do so by drawing the blinds, curtains, and opening the windows to allow the sunlight in. Be sure to switch off lights in well-lit areas well. Letting the sunlight in also means you get passive heating from the sun, hence no need to have the heaters on. While it may seem like nothing, taking advantage of the natural sunlight should help save the business a few kilowatt hours a day.

8. Run Fans

Have fans installed in showrooms, warehouses, kitchens, and offices alike. The fans will help keep the air moving, hence facilitate optimal air circulation. This means the HVAC system will run more efficiently and smoothly translating to lower energy consumption.

9. Power Down Computers and Other Office Equipment When Not in Use

Having everyone power down their computers at the end of the day should help save lots of energy. You might also want to set the laptops to go to sleep or hibernate if not used for a certain number of minutes or hours. Be sure to turn off and unplug other electronic devices from the mains sockets.

Although modern toasters, coffee makers, printers, and other office appliances have a ‘sleep’ mode when not in use, these continue to draw some current if left plugged. Unplugging these will save some more kilowatts. 

10. Avoid ‘Phantom’ Energy

As mentioned earlier, some equipment will continue to draw electricity when plugged in.  That said, making it a habit of unplugging such devices or using a power strip on them, can help save some energy. With a power strip, a simple flip of the switch will cut electricity supply to the connected devices. 

11. Make Adjustments to the Surrounding Landscape

If you have control over the landscape around, you can then use it to your advantage. Energy-efficient landscaping, such as planting trees strategically to block winds and provide shelter, will go a long way in reducing heating and cooling costs.

12. Involve the Employees

Encouraging the employees to take on energy-efficiency practices can help reduce electricity costs and energy wastage too. Train the employees to turn off their computers after work, switch off lights, as well as use energy efficient appliances in the workplace.

Inspiring them to save more energy should work well for the company. You can see more tips and tricks on how to improve employee energy-saving practices here.

The post 12 Ways Small Businesses Can Save Energy first appeared on BioEnergy Consult.

What about existing and especially older homes, however? How can you realistically lower your utility bills and be more sustainably minded?

The following are things to keep in mind.

After-the-Fact Insulation and General Efficiency

While you might not be able to re-insulate your entire house, there are still things you can do to make it more insulated overall.

First and foremost, the winter season is here, and you should go through your entire house to make sure there aren’t any air leaks in your windows and doors. You can use caulking and weatherproofing strips to combat them. You can also install a window insulation kit.

If you have thick, lined curtains, this will keep heat in your house. If you don’t want to buy new curtains, you can add material as a liner, like fleece. During the day, keep your curtains open in the winter, so the sun will warm them up. Then, as the sun is setting, close them to seal the heat in.

Some people use so-called door snakes, which are essentially just something made from materials like old socks that you put at the bottom of your door to block the cold air.

If you have a chimney, plug it in while it’s not in use. In one study, household heating bills were 30% higher when a house had a missing or broken fireplace damper. If your flue doesn’t properly seal, you’re potentially losing a lot of heat through the chimney. You can use a chimney balloon to seal it.

If you have an attic, take a look around. Heat can escape through the attic. You can add foil sheets to the rafters in the roof so that the heat is reflected and goes back into your living space.

Check the seals on your appliances, just like you do for your windows and doors because you want your cold air staying where it belongs.

Improve your heating and cooling efficiency by fixing leaky ductwork, and if you’re sleeping or not at home, set your thermostat back anywhere from 10 to 15 degrees. A programmable thermostat will do the work for you.

Regularly change your air filters because when an air conditioner or furnace has a dirty filter, it makes running your appliances more expensive. It also makes your home dustier. Make sure you’re changing your filters every 60-90 days.

Water

The hot water you use in your home is likely your second-largest power-related expense, based on data from the Energy Department.

Taking shorter showers is simple enough, but there are other things you can do here as well. Replace your showerhead with one that’s efficient, and don’t wash clothes in hot water.

Adjust the temperature on your water heater since the default is typically 140 degrees. If you lower it to 120 degrees, you can reduce the costs of heating your water by as much as 10%. If you’re going out of town, turn the heater to the lowest possible setting.

Lighting and Power

Your electronics and lights make up around 11% of your energy usage.

The easiest fix here is swapping out your old lightbulbs for LED bulbs with an Energy Star label.

Dimmer switch installation isn’t necessarily as easy, but it can save you a lot. Dimmers let you adjust brightness as you need, so you’re saving electricity, and you’re also in control of the ambiance of your room.

Some electronics don’t ever actually power off. They might be in standby mode, so over time, they’re using a continuous trickle of electricity. You can use a smart power strip, which will cut the current if these devices aren’t being used.

You’ll often hear these devices referred to as vampire appliances. A vampire appliance can be anything that doesn’t need to be plugged in all the time yet is.

You can get a home energy monitor that will tell you more about the use of electricity in your home via a mobile app. These devices plug into your electrical panel. You can buy them online, and then it will show you how plugging in or unplugging different devices could impact how much wattage you’re using.

Only run your appliances, like your dishwasher, washing machine, and dryer, when they’re full. No matter how full they are, they’re using the same amount of energy, so wait until you can do a complete load.

Get An Energy Audit

If you’ve never done so, with the likely soaring costs of energy this winter, it could be a good time to consult a professional for an energy audit.

During an energy audit, the person conducting it may do blower door tests, which will check for drafts. They can also use infrared cameras and do other types of inspections to assess the house, the features, and your habits.

These take between one and five hours to complete and usually cost around $400 on average, although they can be more depending on where you live and how big your house is.

Some energy companies offer audits for free or at a discount to their customers, so before you pay, talk to your provider.

The Department of Energy says that if you make efficiency upgrades, it can save you between 5-30% on your bills.

Finally, look at the size of the machines you’re using for both work and entertainment. More people are doing more things at home than ever before, but this could be negatively affecting your energy usage.

Your desktop computer, for example, is going to use more energy than a laptop. Laptops are more efficient overall, and you can unplug them more easily when you’re not using them.

Video game consoles are another example. They’re a lot less efficient than a smaller streaming device. Some people use video game consoles to stream TV shows and apps, but you should only use these consoles for games. Get a dedicated streaming device for TV because a console will use as much as 20 times more energy.

The post How to Realistically Lower Your Utility Bills first appeared on BioEnergy Consult.

Besides making structural changes—like adding solar panels, for example, to your home, there are other ways to save on your utility bills such as turning off lights you’re not using. Below, we’ve gathered our tops tips for saving money on utility bills – and helping out the planet, too!

1. Take advantage of sunshine during the winter

The sun is basically free heat for your home. Homeowners can take advantage of what’s called passive solar design. During the day, open the curtains on south-facing windows to let the sunshine inside so it can warm up your house. This will keep your home considerably hotter during the colder months.

Don’t forget to close the curtains when the sun sets so you can keep as much of that trapped solar heat as possible. Consider investing in thick, insulated curtains, which will help keep heat inside your living spaces.

2. Pay attention to your ceiling fan’s rotation in winter and summer

As you may know, warm air rises. Instead of letting that warm air go up, up and away, you can leverage your ceiling fan to keep that warm air close to you and your family. Reverse your ceiling fan’s rotation so that it turns clockwise instead of counterclockwise. This will keep the hot air in your living spaces. And during the hotter months, make sure the fan is spinning counterclockwise to pull hot air away from you. It is also advisable to hire reputed electricians like ADC Electric who provide quality service and safety to electrical systems in residential properties.

3. Get a new roof

A new roof can make a huge difference in your energy savings. Best of all? Energy-efficient roofing helps you save money in both the colder and warmer months. Many new types of roofing are “cool roofs” which reflect more of the sun’s rays instead of allowing solar heat to permeate into the home. This means that you don’t have to run the AC as low or as often. In the winter, a new roof helps prevent warm air from escaping.

Plus, in many areas, you might be eligible for a government tax incentive for replacing an old roof with an energy-efficient version.

4. Seal drafts around windows, doors, and other areas of your home

One of the best methods for determining what areas of your home can be more energy-efficient is by conducting a DIY energy audit. To do an energy audit, light an incense stick and watch to see if smoke is pulled to cracks in the windows or under the doors. You can also sometimes feel drafts by simply putting your palm up around the edges of windows and doors. Once you find drafty areas, it’s important to seal up those holes with weather stripping or caulking.

Fixing air leaks will benefit you both in the summer and the winter because it helps keep your HVAC system from working overtime.

5. Invest in a smart thermostat

A smart thermostat is a prudent investment, especially if you regularly forget to turn off the A/C or heat when you leave for work or errands. That wasted energy can add up to a big utility bill at the end of the month. A smart thermostat regulates the temperature and automatically programs a specific range to keep you comfortable but turns off in unoccupied rooms.

6. Schedule regular maintenance

Routine maintenance is essential to promote the longevity of your HVAC system and to ensure that your home isn’t wasting energy. Make sure to replace filters at least once a month and keep tabs on how old your HVAC system is, most systems need to be replaced every 15-20 years.

Takeaways

There are a variety of reasons as to why it’s in your best interest to find ways to make your home greener. Not only do green upgrades ultimately save you money, they also help the planet during a time when a climate emergency is threatening our very existence. If you want to see a smaller utility bill and live a more eco-friendly life, utilize some of the tips mentioned in this article. You’ll save money and help save earth, too. However, if you can’t pay your bills with savings, consider getting a loan. KashPilot does not consider your credit history when granting loans.

The post 6 Easiest Ways to Save Money on Your Utility Bills first appeared on BioEnergy Consult.

Get an Energy Audit

Property owners need to understand how much electricity they use before they can install an accurate number of panels. An energy auditor reviews the building’s consumption patterns and recommends an array that could reasonably support the occupants. They may suggest more panels than the building might use, but this is a contingency for poor weather conditions and generating excess.

An auditor is only looking at the building’s specifications. They may be able to provide insight into how panels can perform depending on the weather, but their area of expertise is identifying building use and potential overconsumption areas.

Do a Roof Assessment

Solar panels have a life span of 35 years at most, which helps solar panel clients consider what end-of-life management might look like. Fortunately, this timeline frequently correlates with the life span of some roof materials. Ideally, property owners should attempt to line up these replacements as much as possible.

A professional roofer can look at a roof’s condition and execute repairs that could potentially extend its shelf life. However, some owners may need to reconcile the timing, which will be mismatched. In this case, residents may pay more to have solar panels removed and reinstalled if the roof needs replacing.

Check Roof Orientation

In the Northern Hemisphere, south-facing roofs get optimal sun exposure. Some buildings may want to consider a roof replacement simply to reorient solar panels for better energy generation. Panels can still be installed if a building faces a different angle, but orientation can influence energy consistency or require the building to have backup power.

Think About Landscaping and Hardscaping

Shading is another essential component of panel installation. If there are massive trees or other shade structures in the way of the roof, these need to be moved or cut. It is crucial to maximize sun, especially for buildings with suboptimal positioning. Property owners should ensure that future landscaping and hardscaping plans — such as installing an awning or gazebo — will not hinder an array’s ability to capture sunlight.

Schedule a Structural Engineering Review

Only some roofs are able to hold the weight of a solar array, and an engineer can validate this based on age, materials and slant. Older buildings require a structural engineering review more than new builds. Roofers may also be able to conduct an assessment, but structural engineering reviews can provide certainty. They can also determine if the grounding method can safely penetrate and hold the panels.

Receive an Electrical System Inspection

A certified expert should come in to inspect a building’s power system to see if it can handle a solar array’s output. Sometimes, this warrants upgrading an electrical panel before getting installers on the roof. Some contractors with specific expertise in solar panel insights may bundle essential inspections prior to solar panel installation.

Get Homeowners Association Approval and Required Permits

There are several administrative hurdles to overcome before installers can start drilling. Property owners will need to research if there are any local permit requirements before establishing an active construction zone.

Additionally, many homeowner’s associations (HOAs) have rules about solar panels. The board may need to approve the decision before the homeowner can sign a contract. If there is contention, homeowners can appeal and suggest changing the HOA’s regulations so future households can get renewable energy. One couple in Lancaster, Pennsylvania, attempted to petition unfriendly solar rules by working with like-minded board members to enact change.

Assure Financing and Incentives

Once the structural to-do list is out of the way, property owners can seek financing options. There are loans, leases and power purchase agreements to consider. This is in addition to rebates, grants and tax incentives on the local, state or federal level that could be available.

Owners should consider consulting with a solar installer first, as they are more likely to know what is possible compared to a lender who does not specialize in renewable energy. Doing solo research is also ideal, as homeowners can come prepared to meetings with questions and resources.

Select an Installer

Discovering the most reputable and cost-effective solar installer in the area requires time and patience. There are many factors shoppers can judge a company on, including:

• Online reviews
• Customer service quality
• Pricing and financing flexibility
• Comprehensive warranties
• Environmental certifications
• Equipment types
• Solar panel materials

Customers should narrow down options to a shortlist and get quotes from each provider to see how they compare. Shoppers should feel empowered to ask the installer any questions, including queries about material sourcing or concerns regarding negative reviews.

Review Insurance and Warranties

There are several documents to review before asking a provider for a contract. Contact a homeowner’s insurance representative to see if current agreements include protections for solar panels. If this is absent, consider asking for additional coverage or seeking a new policy that is more considerate of renewable generators. It could protect them during severe weather or if there is unexpected roof damage. The worst-case scenario could cause a loss of coverage for homes with solar panels.

Next, owners should contact the installer and see what warranties are available for the chosen panels. Typically, there are several types, including workmanship warranties and product-specific terms. Workmanship warranties only cover mistakes made during installation and some maintenance activities. Product-specific terms consider component failures or defects. Ideally, purchasers want warranties to include both.

Review the Contract

The next item on the checklist is likely the most intimidating yet rewarding — scanning the terms and conditions. Avoid companies that pressure customers into a deadline, as these may cloud decision-making skills. Trustworthy installers will give clients as much time as needed to review contracts.

Pay attention to details like payment terms, warranties, post-installation services and performance guarantees. Ask the installer to clarify any confusing language. If buyers are suspicious of transparency, they can review the contract with a lawyer to ensure the verbiage is fair and not misleading.

Apply for Net Metering

See if the building’s utility provider allows net metering, which can gain property owners credits for surplus solar generation. If connected to the main grid, the building can forward excess to support other customers. Providers compensate for the contribution, as it makes the grid more resilient and less prone to outages.

Property owners need to know how much energy they can generate on an average day and if they can make the numbers even better. For example, bifacial panels can generate 30% more than traditional arrays because a roof’s reflectiveness can get power from each side. Homes with light-painted rooftops may consider this because it could enhance net metering efforts.

Adjust Building Security Systems

Solar panels are an investment, with the average installation costing $16,000 or more. Consider installing security cameras if the building does not have them already. If they are already installed, check with the provider to make sure the sensors will not receive interference from any technology in the solar panels.

Plan for Accessibility

Solar panels should be accessible. Electrical crews will need to reach them if there are performance concerns or if the panels need a seasonal cleaning. Ensure there are no obstacles or areas prone to collecting debris that could disrupt work or cause safety issues.

Other Considerations

At this stage, preinstallation requirements are met, but there are a few other insights people may want to know beforehand.

Connections to Additional Devices

Property owners may want to expand the utility of their solar panels by having them do more than generate electricity. They can power other equipment like solar water heaters. These provide hot water by using the sun’s power instead of fossil fuels.

There are several types, such as direct and indirect circulation systems. The former includes a pump to send water throughout the building, which works well if pipes are prone to chilling to freezing temperatures. Indirect systems need a heat exchanger and refrigerants.

Monitor Post-Installation for Long-Term Care

Advanced solar panels frequently integrate with smart homes and include apps to have constant oversight of output. Residents should get into the habit of regular monitoring to catch pattern changes early to prevent emergencies, such as complete failure and loss of power. If owners see any changes, they can contact customer support and request a diagnostics crew to review panel health.

Cleaning and Maintenance Needs

Installers will also provide households with some education on how to best care for their panels post-installation. Attentiveness usually means removing debris like leaves, pollen or dirt kicked up to the roof from high winds. People can safely climb a ladder and clear areas without water by using a broom or microfiber cloth to remove any buildup. This will also reduce the anticipated 10 billion gallons of water solar panels may require yearly.

Solar panel maintenance could also mean doing systems checks to see if inverters and electrical components are at peak efficiency, which is automated and visible through connected apps.

If owners feel unsafe going up to the roof, they can schedule twice-yearly inspections with the provider. Scheduling these as regularly as possible will ensure customers get the greatest return on investment from their property’s solar array.

The Ultimate Solar Installation To-Do List

Getting rooftop solar is one of the most empowering decisions households can make for their finances and carbon footprint. It also allows them to obtain energy independence and contribute to a more sustainable community. The benefits are why the preparedness phase is so important to understand in detail, as many could skip pivotal steps. If property owners go through each process attentively, then their solar panels will become one of the best purchases they have ever made.

The post Is Your Roof Prepared for Solar Panels? A Pre-Installation Checklist first appeared on BioEnergy Consult.

Solar energy depends on the power from the sun. It’s eco-friendly and can help you reduce your carbon footprint. Finding ways to maximize your solar energy can ensure that the system delivers as much as possible to meet your home’s power needs and save money.

Below is an outline highlighting how you can maximize solar energy in your home:

1. Perform An Energy Audit

An energy audit can help you gauge if your solar system is fit to serve your energy needs and reduce energy consumption. Different home appliances differ in how they consume energy. Therefore, it would be wise to understand how you use solar energy to adjust the devices that draw more power. Besides being able to know your daily solar power production, some systems include online monitoring technology that offers live feeds and graphs of your solar energy production.

Installing a solar energy meter can give you a detailed audit of individual home appliances, providing you with solar and live-on-grid consumption data. You can study the information you get from the solar meter to determine the high energy use patterns, helping you introduce measures to reduce energy consumption.

2. Use High-Consumption Appliances During The Day

Your solar panels can only produce electricity during the day since they generate energy from sunlight. Therefore, it would be wise to use as much energy as possible during the day. Appliances that consume a lot of energy include the washing machine, dishwasher, and kitchen stove. Running these appliances when energy production is at its highest can help maximize your home’s energy consumption as you would be using this energy directly as it originates from your solar panels.

3. Install A Solar Battery

Solar energy is produced by solar panels during the daytime when the sun is shining. Solar batteries work by storing the energy your solar panels make for use at night or during storms when there’s inadequate sunlight. Additionally, you can use the solar energy you store in your solar batteries during power outages. Installing solar batteries can help reduce your carbon footprint as they reduce your dependence on the energy from the grid.

4. Use Your Solar Energy Wisely

Each home appliance drains solar energy. The number of home appliances you can run at a go depends on your solar system’s size and the amount of energy the appliance draws. Running them constantly and simultaneously throughout the day can quickly deplete the energy you draw directly from your solar panels, placing unnecessary strain on your solar system.

Using one appliance at a time would be best to ensure that you’re wisely consuming your solar energy. For instance, consider running your dishwasher after using the washing machine, taking a shower after using the dishwasher, or turning on your television after cooking dinner.

It’s also wise to turn off standby mode. Electrical appliances like computers, televisions, HiFi systems, and gaming consoles consume electricity on standby. A single household can have most of these electric devices; hence the standby energy consumption can add up to high figures. Therefore, it’s crucial to use switchable sockets to separate these devices from the circuit when not in use.

5. Insulate Your Home

A poorly insulated home typically uses up more solar energy. You can cut energy costs through home insulation by helping it remain cool when hot and warm when it’s cold outside. Hence, your HVAC systems would require less energy than necessary to keep you comfortable with changing temperatures. Therefore, insulating your home can help you divert the energy you would’ve used for heating or cooling your home for other energy needs.

6. Maintain Your Solar System

You can also maximize your solar energy by keeping your solar system in proper working order. Your solar panels can lose efficiency when they’re dirty. It’s crucial to frequently clean them to free them from dirt, leaves, bird droppings, and mold that reduces the amount of sunlight your solar panels receive. Cutting any surrounding vegetation that blocks the solar panel’s access to sunlight is also crucial. Additionally, scheduling regular maintenance of your solar system by a professional can help you identify issues and fix them in time to avoid costly repairs.

7. Install LED Lights

Due to the glowing tungsten filament, incandescent lights typically emit more heat than light. As a result, they consume more energy, leading to higher bills. On the other hand, LED bulbs use all the electricity they receive to produce light, consuming less energy. Installing LED light bulbs can reduce solar energy consumption, helping you maximize the solar energy in your home.

Conclusion

We are currently living in an eco-friendly world. Therefore, most homeowners appreciate solar energy in their homes as it’s affordable, reliable, and environmentally friendly. The guide above can take you through ways to maximize solar energy in your home.

The post 7 Ways To Maximize Solar Energy In Your Home first appeared on BioEnergy Consult.

1. Switch your provider

Switching your energy supplier can help you cut your electricity bills significantly. Shop around to find the cheapest rates for your business and home to save money each month. You can use a price comparison site to find the fairest offers in the market. You may also shift to retail energy providers such as Energy Texas for affordable green energy options. Consider managing your electricity bills online because sending paper bills may attract additional costs.

2. Conduct an energy audit

An energy audit gives you a clear picture of your home’s energy usage, safety, and comfort. It helps you determine how much energy you’re using, what part of your home is inefficient, and what you can improve. It helps know the changes and improvements you can make to become more energy-efficient, so consider conducting your energy audit before finding ways to reduce energy usage to identify cost-saving opportunities.

3. Use programmable thermostats

A programmable thermostat allows you to control your home’s temperature regardless of your location, helping you save money on your heating and cooling costs. Your thermostat settings will differ depending on seasons, local climate, and your home’s condition. With a programmable thermostat, you can use a pre-set schedule to regulate the times your heating and cooling system turns on.

Don’t set your thermostat at settings colder than usual when turning your AC to unnecessary energy expenses. Place your thermostat far from windows, doors, direct sunlight, kitchen, drafts, and hallways to prevent it from changing the temperature unnecessarily.

4. Insulate your roof

If your home is adequately insulated, less warm air will escape during the winter and summer, reducing the amount of heating and cooling energy. Insulation reduces heat exchange through walls, attic, roof, and ducts. Well insulated walls, ceilings, and floors require less energy to heat and cool your home. Seal and insulate your ducts to heat and cool your home. Warm or cool air can escape through gaps and cracks, so consider weather stripping and caulking to prevent air leaks, saving energy.

5. Be careful with lighting

While switching off your lights when not in use can save energy, changing your lighting can yield more energy savings. Consider replacing your bulbs with energy-efficient light-emitting diodes (LEDs) and compact fluorescent lamps (CFLs) to make your home more energy-efficient. Place lamps in corners and use daylighting techniques and automatic dimmers for improved energy efficiency. You can also use task lighting, including reading lamps, bedside and desk lights, to meet specific needs.

6. Use energy-efficient appliances

Using energy-efficient appliances reduces home energy bills, saving you money. When shopping for energy-efficient appliances, consider available space to ensure ventilation clearance. Look for the Energy Star logo to ensure your appliances are energy-efficient. Consider replacing your clothes dryers, refrigerators, dishwashers, and other appliances in your home with Energy Star labels to save electricity.

Endnote

If not controlled, your monthly energy costs can be very high. Use these tips to save big on your electricity bill.

The post 6 Tips to Save Money On Your Electricity Bill first appeared on BioEnergy Consult.

Audit energy use

Manufacturing plants typically use huge amounts of gas or electric energy. Adopting energy-efficient practices to optimize the plant’s energy use can slash costs considerably. Start by conducting an energy audit — ideally during the next scheduled plant downtime — to identify areas requiring improvement. HVAC systems, in particular, are huge energy and money drainers. Replace the filters and insulation so hot or cold air doesn’t escape. Repairs may also be needed. Temperature controls can be precisely automated with a programmable digital thermostat.

Additionally, common industrial lighting like incandescent bulbs should be switched out for LED lighting, which uses 75% less energy and lasts 25 times longer. Keep track of your eco-friendly changes and monitor energy use to make sure you’re operating at maximum efficiency.

Minimize waste

Reducing manufacturing waste is an effective way of making your plant more sustainable. For example, limit the quantity of excess raw materials your plant has in stock; order just enough material for the job it’s needed for each time. Work on recovering waste from both onsite and offsite locations with the help of techniques like centrifugation, electrolysis, reverse osmosis, or filtration.

Alternatively, recycling materials is a simple way to recover useful materials (recycling hazardous materials, however, usually isn’t eco-friendly). High-power, industrial shredders, in particular, can help you deal with a number of waste materials (such as, wood, plastic, rubber, and asphalt) by considerably reducing their size. Investing in durable equipment also reduces waste. For example, Bobcat T190 tracks are designed to minimize wear and tear to the tire. The thick, high-quality rubber lasts longer, so the tires need replacing less often.

Switch to renewable energy

Switching to renewable energy can help your plant generate its own clean electricity and heating. In fact, by 2035, renewable energy is set to be the main global power source, according to the 2019 Clean Jobs America report. Green power sources like solar, wind, biomass, geothermal heat, and rain are also cheaper than traditional fossil fuel energy sources.

Depending on your state, you may also be able to benefit from tax incentives and earn money back. You can also support renewable energy by selecting a renewable electricity tariff with your supplier. This means either some or all of the power your plant uses will be matched by your supplier purchasing green energy.

Making your manufacturing plant more eco-friendly certainly isn’t an overnight job. However, it’s well worth the time and effort it takes to make positive and permanent changes. Switching to sustainable practices and tech-driven equipment will help the environment, save energy, and improve your bottom line.

Recommended Reading: How to Tackle Vibrations using a Cariolis Flow Meter

The post Sustainable Manufacturing: Eco-Friendly Ideas For Your Plant first appeared on BioEnergy Consult.