Conveyors are also used for carrying recycling materials such as wood or paper wastes to their respective grinding and process centers. Waste conveyors are manufactured with materials that do not get damaged by constant exposure to abrasives. They are also not affected by sticky or greasy liquids and dirt. Belt conveyors and chain conveyors are the most commonly used conveyors in recycling plants.

Mostly non-powered conveyors are used in the industry. However, powered belt and roller conveyors are sometimes used for handling small products. They are typically used for pallet handling.

Conveyors are also used for moving waste materials in long streams so that they can be separated. Vibrating belts are attached which separate materials that require inspection. Waste materials and recycling industry is mostly about dealing with contaminated products and trash. Thus additional cautions are considered for the safety and environmental standards of the workers.

Types of Conveyors

Conveyors vary in shapes and dimensions according to their utility. From being installed in biomass plants, waste sorting plants, material recovery facilities, waste-to-energy plants, to being a prime component at food processing facilities, paper industry, mining, and pharmaceutics, conveyors are used everywhere.

Even at tough job-sites where transfer of materials is required across steep inclinations or large distances conveyors can ease the process. Generally, they are classified as belt conveyors and screw conveyors.

Screw Conveyors

Screw conveyors were invented by Archimedes and its core design hasn’t changed from its original design over these years. They can be vertical or horizontal with an entirely contained, metered space. Screw conveyors are generally used for moving dust-free movement of grains or flakes, powders, sludge, etc. They are made of galvanized metal, carbon steel, stainless steel, tapered screws, discharge chute, or in-feed hoppers.

Belt Conveyors

Belt conveyors have a wide-open frame which enables them to contain and move high loads of material over long distances. This is why they are commonly used in the mining industry and other places where heavy materials are required to be transported.  Structurally they are rugged loops that run over two or more pulleys. Additional rolls are also added in between to provide support in long belts.

Materials ranging from garbage to fine grains and powders and be carried over belt conveyors. They are also used for the movement of commercial waste including paper, plastic, or aluminum cans.

Belt material, configuration, and dimension differ according to its application. Various designs of belts are used nowadays, for example, magnetic belts, flat belts, trough belts, rubber belts, etc. Moreover, conveyors are also designed in shapes such as to carry fluids including sludge and water. Key manufacturing materials for these belts are cotton, canvas, leather, nylon, polyester, silicone, and steel. Dimension, design and materials can be easily customized depending on its application and to meet customer requirements.

The post Conveyor Systems for Waste Management first appeared on BioEnergy Consult.