1. Get A Free Energy Audit

A full energy audit helps identify issues that might be causing energy wastage – these include insulation issues and air leaks. Most electricity utility companies offer these audits free of charge. The inspection not only helps you determine how energy is used but also ways to address energy wastage.  The audit report will also recommend ways to keep your energy usage on the low, such as investing in energy efficient lighting and equipment.

2. Invest in Energy-Efficient Office Equipment

Energy efficient (energy-star rated) appliances use up less energy as compared to older non-rated ones. That said, it would be advisable for you to lease/buy energy star rated office electronics.  This should help see your energy bills drop significantly, hence substantial cost savings in the long run.

3. Avoid Peak Demand

Peak demand can be defined as the time of the day when there’s a high demand for energy. These are the hours when energy usage is the highest. The typical peak hours start from 9 a.m. to 5 p.m.  Reducing your demand for electricity during these times and only running the factory and heavy equipment early in the morning, and later in the evening can help reduce energy consumption. Reducing your demand for energy during peak hours also means your small business spends less on energy usage at the end of the day.

4. Use Programmable Thermostats

Smart thermostats make it easy to monitor and control temperatures in the workplace when everyone is in the office (9 – 5), and away. The thermostat can be programmed to turn OFF the heating and cooling appliances during the night, and back ON a few minutes to ‘work hours’. This in return sees you save lots of energy that would have otherwise been wasted had the HVAC systems remained on through the night.

5. Switch Off Lights in Unused Areas

Most offices have an always-on lights setup. This means the lights in all rooms including bathrooms, conference rooms, breakrooms, and even unused corridors. This leads to energy wastage which can be preserved if lights were only turned on when needed. Installing sensors to turn the lights on or off when required could help too.

6. Switch to Energy-Efficient Light Bulbs

Incandescent bulbs use up more energy for the same amount of light when compared to CFLs and LEDs that use just a fraction of it. Switching from incandescent bulbs to CFL or LEDs should help the company use less energy in lighting. This is the simplest and easiest ways to save energy in the workplace.

7. Make Use of Natural Light

Always take advantage of the natural sunlight whenever you can. You can do so by drawing the blinds, curtains, and opening the windows to allow the sunlight in. Be sure to switch off lights in well-lit areas well. Letting the sunlight in also means you get passive heating from the sun, hence no need to have the heaters on. While it may seem like nothing, taking advantage of the natural sunlight should help save the business a few kilowatt hours a day.

8. Run Fans

Have fans installed in showrooms, warehouses, kitchens, and offices alike. The fans will help keep the air moving, hence facilitate optimal air circulation. This means the HVAC system will run more efficiently and smoothly translating to lower energy consumption.

9. Power Down Computers and Other Office Equipment When Not in Use

Having everyone power down their computers at the end of the day should help save lots of energy. You might also want to set the laptops to go to sleep or hibernate if not used for a certain number of minutes or hours. Be sure to turn off and unplug other electronic devices from the mains sockets.

Although modern toasters, coffee makers, printers, and other office appliances have a ‘sleep’ mode when not in use, these continue to draw some current if left plugged. Unplugging these will save some more kilowatts. 

10. Avoid ‘Phantom’ Energy

As mentioned earlier, some equipment will continue to draw electricity when plugged in.  That said, making it a habit of unplugging such devices or using a power strip on them, can help save some energy. With a power strip, a simple flip of the switch will cut electricity supply to the connected devices. 

11. Make Adjustments to the Surrounding Landscape

If you have control over the landscape around, you can then use it to your advantage. Energy-efficient landscaping, such as planting trees strategically to block winds and provide shelter, will go a long way in reducing heating and cooling costs.

12. Involve the Employees

Encouraging the employees to take on energy-efficiency practices can help reduce electricity costs and energy wastage too. Train the employees to turn off their computers after work, switch off lights, as well as use energy efficient appliances in the workplace.

Inspiring them to save more energy should work well for the company. You can see more tips and tricks on how to improve employee energy-saving practices here.

The post 12 Ways Small Businesses Can Save Energy first appeared on BioEnergy Consult.

Trees grow towards the sun, which feeds their foliage. Animals are adapted to their pastures, and their pastures are adapted to them. As a result, everyone wins. Animals satisfy hunger, and plants flourish again. In this great life journey on Earth, each species has a particular function and takes a certain place. There are no useless creatures. They are all balanced.

And Homo sapiens – a man of sense – enters the arena of history. He received a fabulous inheritance that the Earth has carefully preserved for 4 billion years. He is only 200,000 years old, but he has already changed the face of the world. Despite his vulnerability, he captured all the habitats and conquered the territory like no other species before him. Today, life – our life – is only a link in the chain of countless lives following one another on Earth for 4 billion years.

For a long time, the relationship between people and the planet were fairly balanced and resembled a natural and equal union. Now, we rarely think about global issues, being lost in everyday concerns. Meanwhile, we are on the verge of a disaster. Thanks to the achievements of science and technology, people learned to satisfy their needs, but some inventions brought us much more harm than good. We are killing our planet gradually but purposefully.

Only by changing your habits quite a bit, you and your loved ones can make the world cleaner and safer. These 15 simple tips do not require you either time or extra effort, but can make a difference in saving the world:

1. Make the most of natural ambient light. Turn off the light in the room or the computer monitor when you do not need it. And do not forget about the chargers in the appliance receptacle!
2. Teach yourself to turn off the water at a time when you do not need it – for example, while brushing your teeth or rubbing the pan with a detergent. On average, according to statistics, 5-10 liters of water (depending on pressure) flows out of the tap per minute. Also, reduce the time spent in the shower for 1-2 minutes.
3. Replace incandescent bulbs with LED lights: they save energy and last longer.
4. Change to a bike. It is cool, fast, and comfortable. Having tried only once, you no longer want to get on the “hot bus” or spend time stuck in traffic jams. In addition, a bicycle is an excellent vehicle as it does not pollute the air with dangerous gases.
5. Use phosphate-free detergents. On the Internet, there are many resources offering ecological household chemicals.
6. Buy less plastic bags, go to the store with your eco-bag.
7. Replace plastic with paper and glass. If you cannot do without disposable tableware – for example, when going on a picnic – use paper plates and cups rather than plastic ones. Purified water from under sink reverse osmosis system is the best alternative of plastic bottled water.
8. Choose cosmetics and chemicals especially carefully. You should give preference to products that have not been tested on animals and do not adversely affect the environment at different stages of production.
9. Though it is as simple as ABC but very effective – try to bring plastic, glass, and paper for recycling.
10. Bring batteries to special shops and institutions because this is a dangerous and very toxic type of waste.
11. Refuse semi-finished products. Experts say that today, the manufacture of these products is fully controlled by monopoly companies that abuse antibiotics, overload the ecosystem, and apply the principles of intensive management for their own profit. Of course, in such conditions, quality suffers. Homemade food is much better. Do not know how to cook? A dating site may be helpful.
12. Buy local food – the one that is made in your area. This food undergoes less chemical treatment which is sometimes used for long-term transportation.
13. Use water filters. In this case, you do not need to spend money on bottled drinking water. Thus, you will not only save your family budget but also reduce the environmental impact caused by the production and transportation of plastic bottles.
14. Plant flowers on window sills and trees in the courtyards. Do not let anyone cut down green spaces near your house.
15. Support environmental organizations and encourage your family to do it.

“Orbiting Earth, I saw how beautiful our planet is. People, let us preserve and increase this beauty, not destroy it!”

– Yuri Gagarin

The post 15 Simple Ways You and Your Family Can Save the Planet first appeared on BioEnergy Consult.

This leads to an increase in heat in the immediately surrounding areas, making temperatures a few degrees hotter than the actual weather. This causes discomfort to residents of the area and can also incur damage in the form of heat-damaged structures.

There is also a human cost associated with urban heat islands. Heat-related medical emergencies such as heat stroke become more prevalent in such areas as the heat can go up to dangerous levels. The EPA has taken stock of this phenomenon and is now advising cities to take steps to mitigate it. One such way is the use of solar roofs as a means of making cities cooler and more comfortable to live in.

How does solar minimize this effect?

Cool Roof Strategy

A cool roof strategy is a one that seeks to use heat absorbing and/or dissipating roofing materials and technologies. Typical roofs use materials that either reflect or absorb and radiate back heat thus significantly reducing the urban heat island effect. Conversely, cool roofs, like solar, can help absorb sun rays and convert them into beneficial energy.

Solar excels at this because of the way the cells are designed and organized to absorb the maximum amount of sunlight. Solar roofs are also designed to trap this heat rather than radiate it back into the environment, something that can help reduce the amount of secondary heat being released into the environment.

Reduced Construction

When solar roofs are implemented, there is usually a reduced need to construct structures that support the traditional electric grid. Such a scenario can play out in several ways. If a new estate is being built with nothing but solar power, there is a possibility that some open spaces can be retained as fallow ground in places where utility implements would have been installed.

While the gains at this level would be marginal, implementation of this strategy across several thousand estates can help move the needle in reducing the urban heat island effect.

Combination Approach

This approach offers the greatest promise of reducing heat in urban settings. By combining the cool roof strategy with other strategies like green roofing, planting more trees and vegetation and small parks, cool paving and general smart city growth, a lot of ground can be covered.

All these strategies have one thing in common in that they all absorb and dissipate heat in an efficient and sustainable manner. Many cities have a high incentive to deal with this issue because of its effect on residents and visitors to the area. If street-level temperatures are unbearable, it is possible that tourists and potential new residents may shy away from the area in favor of other cooler and sustainable cities.

The post How Solar Roofs Can Minimize The Urban Heat Island Effect? first appeared on BioEnergy Consult.

Tree healthcare for humans

Trees are well known for providing oxygen as a result of their photosynthesis process. It is in fact the carbon dioxide (CO2) that is removed during this process therefore helping to mitigate the negative effects of burning fossil fuels ie. CO2 production. The benefits to the world of this process make the existence and importance of the Amazon rainforest especially significant.

Trees benefit cities too

Not only are trees a beautiful addition to any city, they also serve a practical purpose by absorbing pollutants. Their presence makes a city appear more vibrant and more friendly. For example, San Francisco is home to 105,000 trees. Tree planting should be kept in pace with tree mortality and tree removal. A tree management plan is essential to ensure sustainability.

Tree management for woodland

Trees should be checked for health and also for the merchantability of the trees. When areas of the woodland require thinning out it is useful to produce a product that has a commercial value. This way waste management has been prioritized and has turned a Liability into an Asset.

The harvested wood/logs can be considered an asset and can be sold as fuel. Always ensure trees are removed when over-crowding is an issue to allow for tree growth of the remaining trees. The woodland is sustainable by including sufficient planting of new trees.

Arborists are trained to evaluate the health and ongoing sustainability of a tree. Oftentimes they can prescribe solutions to prolong a tree’s life, thereby protecting the environment as well as improving surrounding property values.

Most cities have tree service companies that offer trained arborists who can provide consultations. Depending on the depth of the consultation it may be free or at a very low price.

An ISA-certified arborist can make qualified decisions on whether a tree needs to be removed or if it can be saved.

Additionally, during their consultation, they will be careful to not damage the tree further. Trufast Tree Care has a certified arborist on staff for helping with these tree evaluations

Maintaining the urban trees

Your arborist can advise you of local procedures and the law regarding your trees which if not properly managed can become a legal liability. Some types of trees do not take well to heavy pruning, for example the Southern Live Oak is best not located in restricted areas where heavy pruning to clear avenues may be required. It is better to grow it in a larger landscaped area where it can grow with minimal pruning. They often reach 60 to 80 feet in height with a 60 to 100 foot spread. Check this website if you are looking for a reliable tree care service in San Jose, CA.

The branches of Live Oak tend to droop as they grow so some careful pruning will be necessary especially as this type of growth can be a problem for vehicular or pedestrian clearance beneath. Many trees are not permitted to be removed without obtaining a tree removal permit first. This is good as it provides some protection for the trees.

Other tree varieties to grow with sustainability

The beautiful red maple is a great yard tree being very tolerant and is able to grow in nearly any conditions but especially in acid to neutral soils. Plant away from paths etc. as the roots can raise sidewalks if too close. A good layer of organic mulch should be placed around the roots to feed and help retain moisture.

Another commonly found tree in the US is the Loblolly Pine. When found in plantations it provides the perfect habitat for wildlife such as deer, squirrels making it a very sustainable choice. Being a faster growing tree it requires more regular pruning.

Enjoy our future with sustainability for trees

Sustainability ensures we leave the world in a good state for future generations to enjoy, whilst still meeting the needs of the current population. Keep your trees maintained moving forward and always pay attention to the type of tree and manage accordingly. This way you can enjoy the many beautiful trees around you.

The post Manage Trees With Sustainability In Mind first appeared on BioEnergy Consult.

For those unfamiliar with revegetation, you’ll want to review its benefits to prevent soil erosion successfully, reduce wind erosion, and boost soil’s ability to soak up water that runs off the surface. Without employing revegetation-based erosion control strategies, plant communities and delicate habitats may sustain avoidable damage.

Benefits of revegetation

Unlike the normal tree planting process, revegetation requires pre-planning activities like land designing. In the designing phase, you’ll outline which type of plants to use in specific areas and perform soil compatibility studies. Proper environmental and landscape analysis are the key to successful revegetation. Proper planning ensures that you allocate money and resources wisely and fare a better chance of achieving your goals and earning a profit.

Some native plants can only grow in specific areas, so it’s essential to identify which plant types can endure your region’s climate. Homeowners complete the revegetation process for various reasons, including its ability to benefit governments, private individuals, communities, and companies, alike.

If you need a solid Colorado seed company that provides conservation and reclamation seeds, check out Granite Seed; they’ve been implementing soil erosion control measures and distributing products across North America for more than 30 years. For optimal results, consult the professionals.

Soil erosion control

Revegetation is crucial, as the risk of erosion damage increases when the land is bare or contains little vegetation cover. Plants offer a protective barrier and prevent soil erosion by slowing down water runoff and encouraging more water to seep into the ground. Additionally, the roots hold the soil intact while protecting the plant itself from powerful rushing water that can wash it away. This plant life also assists in stabilizing slopes and embankments, lowering the terrain’s susceptibility to landslides.

Trees, grass, crop residue, and plants offer ultimate soil coverage and intercept all falling raindrops, acting as the most effective soil erosion control measure. Mulch provides additional protection from wind and rain before the newly-planted seeds take root while minimizing soil moisture loss during prolonged dry periods.

Mulching is crucial in halting destructive erosion and establishing vegetation in places with severe exposure to natural and human-driven erosion. Experts advise utilizing hydromulching in such conditions. The absence of windbreakers like crop residue, trees, and shrubs leads to more soil displacement, thus increasing erosion and abrasion.

Conservation

One of the primary roles of revegetation is to connect lost patches of natural habitat. It serves as a crucial tool in areas that have suffered extensive natural vegetation clearances like urban environments. Research shows that revegetation can facilitate the restoration of significant urban bird populations by connecting the existing habitat with new patches, enhancing bird species diversity.

Developing large habitat patches is an effective method of increasing bird abundance. Therefore, revegetation plans should carefully consider how to connect the new vegetation patches with the existing habitats for the sanctity of bird populations. Revegetating agricultural zones, in specific, can encourage breeding.

For the most part, revegetation favors thriving and common species of birds over declining, rare types. Despite its favoritism, revegetation provides a home to millions of species like small mammals, insects, and birds, when successful.

Soil fertility restoration

Activities like mining lead to extensive topsoil damages as reinstatement, stripping, and stockpiling causes soil degradation. This damage occurs through accelerated soil erosion, soil structure loss, soil PH reduction, organic matter depletion, compaction, reduced microbial activity, and heavy metal accumulation. Topsoil management is essential for restoring fertility and minimizing nutrient losses.

Revegetation via forest vegetation restores soil fertility by improving the capacity to exchange cations, organic matter, and available nutrients while sustaining biological activities and improving physical conditions.

This method is beneficial, but it takes prolonged periods to regenerate the soil to its original state. Some of the ideal trees for revegetating mined lands are grasses, legumes, trees, and herbs N-fixing species. The favorable tree species are Leucaena, Acacia, and other acid-tolerant legume trees, which provide the soils with substantial organic matter.

Pollution reduction

Revegetation and reforestation play a significant role in minimizing pollution. The net carbon release from deforestation was estimated at 1-2 billion tonnes in 1980 and between 1.5- 3 billion in 1989. There’s enough evidence to verify a significant increase in deforestation since 1980 in multiple tropical areas. Revegetation offers a long term solution to sequestering carbon (IV) oxide because as trees mature, they eliminate Carbon (IV) oxide, thus slowing down carbon buildup in the atmosphere.

Beautifies the landscape

Besides purifying the air by filtering pollutants and harmful dust and gifting human beings with life-supporting oxygen, vegetation also makes the environment beautiful. Revegetating bare land makes it attractive, restores its appearance, and can even boost its value.

If you notice your yard is looking dull or lifeless, vegetation can add color to a property’s outdoor living spaces. For example, trees bear beautiful flowers, magnificent leaves, and fruits, which can sprinkle vibrant accent colors throughout your back and front yard. For more information on how to keep your trees healthy, check out this article.

It would be best to seek an expert before embarking on your revegetation project, as it can be a meticulous process. A revegetation expert will offer expert insight and advice on how to proceed.

The post What is Revegetation and Why is it Important? first appeared on BioEnergy Consult.

Below, you’ll discover some of the best ways to create a greener business no matter what your budget.

Install solar panels

If you want to really make a difference, you can install solar panels in your premises. This helps to provide greener energy. Using the sun’s rays to power up the building, these panels can also save you a lot of money over the years.

The only trouble is, installing solar panels isn’t cheap. So, if you don’t have the funds available you have two options. You can see whether there are any government schemes to help fund green changes in your business. Or, you could seek business funding from a responsible lender. You’ll get the money back that you borrowed over time through the money saved with these panels.

Add plants in and around the business

Another great tip is to add plants and trees in and around the business premises. Using trees and greenery outside the building helps to improve the environment. They are known to clean the air, benefit local wildlife and they make the premises look much nicer.

You can use plants indoors too. Adding plants to the office can not only benefit the environment, but your workers too. Research the best indoor plants to add to your business for the most eco-friendly benefits.

Encourage employees to go green

As a business owner, there’s only so much you can do to make the company greener. You’ll also want to enlist the help of your employees to make greener changes. For example, you could encourage them to cycle to work, rather than driving. Or, you could implement a car sharing scheme to cut down on emissions.

Switch to renewable energy

Finally, another way to create a greener business is to switch to renewable energy. Did you know some companies focus on providing 100% renewable energy? Switching to these suppliers won’t just help you protect the environment; it will also save you a lot of money potentially too.

It’s worth researching your options to see which supplier best fits your needs. Switching suppliers is a fairly straightforward process these days so you should find it an easy task.

These are some of the main ways to make greener changes in your business. By implementing greener policies, you’ll be able to really cut down your company’s carbon footprint. With global warming remaining a very serious threat, anything you can do to reduce your impact on the environment is going to be worthwhile.

The post Create a Greener Business with These Changes first appeared on BioEnergy Consult.