Category Archives: Waste Management

Peeping into the Future of Waste

  By | | ,
14 Comments

Waste management is an important tool for curbing climate change and for keeping our environment clean and healthy. Methane generated from biodegradable wastes is a powerful greenhouse gas, and when it’s not captured and used as a fuel it contributes to rapid warming of the atmosphere. Estimates suggest that biodegradable waste in dump sites and uncapped landfill sites are contributing far more methane to the atmosphere than previously thought. What’s more, urban food waste is predicted to increase by 44% from 2005 to 2025, and with no proper management in place, will significantly add to global greenhouse gas emissions.

Worryingly, 38 of the world’s 50 largest dumps are close to the sea, contributing to marine and coastal pollution. The accumulation of plastics in the marine food chain is causing global concern. While we don’t yet know how to clean the oceans, stemming the flow of waste into marine environments would be a step in the right direction.

Wasted health

40% of the world’s waste ends up in open dumps. These aren’t even what you’d call “landfill”. They don’t have any impervious lining to prevent noxious leachate from entering the surrounding environment, nor are they capped to prevent the spread of disease. In fact, in India, the Philippines and Indonesia, the health risk from open dumping of waste is greater than the risk of malaria[i].

3.5 billion people in the world lack access to proper waste management. That figure is expected to grow to 5 billion by 2050. Respiratory diseases, gastrointestinal diseases and occupational health risks add to the misery experienced by the 50,000+ people living from open dumps.

Waste is any material that is no longer wanted for its original purpose. The owner doesn’t have a need for it, and so discards it. Even valuable items can and do end up as waste purely because someone has thrown them away. The recent (and rather brilliant) BBC programme Hugh’s War on Waste shone the spotlight on attitudes towards disposable fashion. A look through the bins of a typical street uncovered a startling amount of clothing that had been thrown away, despite it still being in perfectly good condition. This highlights a simple fact: there is plenty of value in waste.

  • Estimates suggest there are 40 million people globally who are making their living from waste – half of these are working informally.
  • During the last recession in the UK, the waste management sector was one of the only industries to keep growing, resulting in it being termed the “Green Star of the Economy”.
  • Showing people how to turn a waste stream into something valuable isn’t rocket science. There are lots of examples of informal, community-based, grassroots recycling and upcycling projects that generate wealth for the poorest in society.
  • Internet is allowing simple waste processing techniques to be replicated all over the world, and helping make that information accessible is one of the most fulfilling aspects of my career.

Business skills

“Give a man a fish and he can eat for a day. Show a man how to fish and he can eat for the rest of his life.” Teaching people how to make valuable products from waste is important. But just as important, is passing on the business skills to be able to identify a market, factor in costs, check out the competition, market their products and run a successful business.

Development work in the waste arena needs to address both sides of the coin, and in doing so will enable people to start up their own businesses, in their own communities, and generate wealth organically. That’s far more valuable than delivering aid in a ready-made package (which incidentally rarely works – there’s a great TED Talk on this topic by Ernesto Sirolli, called “Want to help someone? Shut up and listen”).

Why closing dumps isn’t a silver bullet

The proliferation of megacities, particularly in developing countries, is causing a health crisis. Decent waste management is an indicator of good governance – that is, if a council or government can collect taxes and provide a waste management service, then it most likely isn’t (very) corrupt. However, in many places where corruption or other forms of bad or weak governance prevail, top-down solutions are notoriously difficult to implement.

Often, when the world’s attention turns to an open dump, the government responds by closing it and the journalists go home. This is what happened with Smokey Mountain dumpsite in the Philippines (and many others around the world). All that happens is another open dump emerges nearby, and the scavengers move to the new site.

The problem is that if there is no alternative solution in place, people will discard of their waste in the only ways available – dumping it or burning it; and the poor will follow the waste.

Replacing an open dump with a government-controlled waste management system isn’t a silver bullet either. The losers, again, are the hundreds, and sometimes thousands of men, women and children who live from scavenging from the dump. It may seem horrific to many of us, but the truth is that if you take that opportunity to earn a paltry living away from the poorest in society, they will starve. Solutions need to be inclusive.

Power to the people

To close dump sites, you need to have a workable alternative solution in place. You need to have regular waste collection taking place, and you need somewhere to take it. Building materials recovery facilities alongside existing open dumps is one idea. Informal waste pickers who are currently working in dangerous conditions on the dumpsite can gain employment (or better still, form a cooperative) sorting recyclable materials and reducing the amount of real “waste” that needs to be disposed of.

For example, Wecyclers in Lagos, Nigeria employs people to cycle around collecting recyclable materials from households. In return for their source-separated waste, the householder receives a small reward.

In Bangalore, IGotGarbage has harnessed the power of phone apps to enable people who were previously waste pickers to be called directly to a house to collect the waste materials. Solutions like this work because they continue to provide livelihoods for people, while taking waste off the streets.

The need for appropriate technology

There will always be something left though: the stuff that really has little value other than the energy embodied in it. In industrialized countries, energy-from-waste incinerators have become popular. Seen as a clean alternative to landfill, these facilities burn the waste, release the energy, and convert it into heat, electricity and ash. Some of that ash (from the air pollution control system) still needs to be disposed of in specially-prepared hazardous waste landfill sites. The remainder, being fairly benign, can be used to make concrete building blocks.

However, incinerators are fairly technology-heavy, rendering them unsuitable for many developing country contexts.

A problem that we’ve witnessed is that waste management companies from industrialised nations try to wholesale their technology in developing countries. The technology is usually unaffordable, and even if the capital can be raised to procure a facility, as soon as something breaks down the whole solution can fall apart.

There is a need for information about simple waste processing technologies to become more open-sourced. Smart future-thinking businesses could capitalise on selling blueprints rather than entire prefabricated facilities. Most of the time it’s far cheaper to fabricate something locally, and also means that when something breaks it can be fixed.

The continuing need for landfill

The fact is that in most cases, a standard, lined landfill site with landfill gas capture is still the most appropriate answer for non-recyclable waste. Add to that a well-organised, low-cost waste collection service with source separation of recyclable materials and biodegradable waste, and you have a relatively affordable solution that is better for the climate, better for health, better for the local economy, and contributes to a more sustainable future.

Landfill may seem very unfashionable to those of us who work in the recycling sector, but nevertheless it will remain a necessity both in developed and developing countries for the foreseeable future.

Joining forces and stepping stones

The success of the Sustainable Development Goals and potential Climate Change Agreement depend on developed and developing countries working together. Miguel Arias Cañete, the EU climate commissioner, said the Climate Coalition alliance showed that developed and developing countries could work together with a common interest. “These negotiations are not about them and us. They are about all of us, developed and developing countries, finding common ground and solutions together. We urge other countries to join us. Together we can do it.”

Necessity is the mother of invention, and we are facing a waste crisis of unprecedented proportion. The potential for waste management in reducing GHG emissions has never been more pertinent. Waste and development practitioners, academics, technology companies, and entrepreneurs around the world are working together more and more to help bring about the change we want to see, which will benefit the billions of people suffering from poor waste management, and the rest of us who share a warming planet – and share the burden of climate change and poverty.

By sharing knowledge through platforms such as beWasteWise and ISWA, and through initiatives like WasteAid, WASTE and Wiego, we can start making a dent in this very large problem.

No silver bullets, but lots of small stepping stones in the right direction.

Note: The original and unabridged version of the article can be found at this link. Please visit http://zlcomms.co.uk/ for more information about the author.

The Benefits of Recycling as an Energy Conservation Measure

  By | | , , ,
4 Comments

Recycling is an effective energy conservation measure that translates into avoided emissions alongside other environmental and economic benefits. It saves energy by decreasing or eliminating energy use during extraction, transportation, and processing of raw materials into finished products.

How Recycling Saves Energy

Manufacturing is a labor, waste, and energy-intensive process that is never-ending due to the increasing demand for consumer products. Manufacturing products from scratch requires raw materials to be extracted, transported, and refined. However, when recycling, you are using already refined materials that need less energy to be transformed into usable products.

Recycling also saves time, money, natural resources, conserves the environment, and shrinks landfills. Hence, the more we recycle, the more we save and gain. Because of these benefits, it is essential to sign up for a residential recycling collection service to have your recyclable trash going to the right place.

recycling-in-offices

The amount of energy saved through recycling generally depends on the material being reprocessed. Let’s take a look at the energy savings of four of the most commonly recycled materials.

1. Aluminum

Aluminum manufacturing requires huge amounts of heat and electricity. Despite constant efforts to reduce energy consumption, manufacturing aluminum still costs three times more than the theoretical minimum energy requirement.

Recycling aluminum cans and scrapes requires 6 percent of the energy needed to manufacture aluminum from bauxite ore. Repurposing aluminum saves the energy that would have been used to extract, transport, crush, and combine bauxite with caustic soda. Additionally, extracting aluminum from bauxite requires the ore to be purified and smelted.

Thus, the aluminum recycling process is fast, efficient, and achieves up to 94 percent energy savings. Even better, you can recycle aluminum infinite times without degrading, increasing energy saving in the long run. Besides, introducing new alloys and improved product design along the product chain results in more energy and environmental savings.

2. Glass

Glassmaking is an energy-intensive process that involves melting sand and other minerals at extremely high temperatures. Reprocessing glass still needs lots of energy to melt the glass and make a new product. The U.S. Environmental Protection Agency (EPA) says reprocessing glass results in 30% energy savings. Glass, like aluminum, does not degrade when it is recycled.

Thus, tossing glass in recycling bins will help preserve natural resources, like sand and soda ash, and reduce the energy costs involved with transporting these heavy materials. It also allows glass manufacturers to cut on energy input to their furnaces. The cumulative energy costs decrease by 2 to 3 percent for every 10 percent of broken glass used in the production process.

Moreover, the durability of glass allows for recycling without reprocessing. This means that you can save 100% energy by cleaning and reusing glass around your home and eliminate the need for an energy-intensive manufacturing process.

3. Paper

An average American household throws away 13,000 pieces of paper every year. These translate into almost 1 billion trees worth of paper being thrown away yearly in the U.S. You can recycle all or most of this paper and contribute to 40% energy savings. Recycled paper can be used to make a variety of new paper products.

paper-recycling

However, this is limited by its appearance, which is not as white or smooth as new paper. Fortunately, biodegradable inks and erasable paper promise improved paper recycling efficiency. You could also reduce your paper usage or reuse paper around your home whenever possible to conserve energy and save trees.

4. Plastic

Many plastic products are single-use commodities that are only in use for a few minutes. However, these require hundreds of years to biodegrade. Sadly, approximately 4 percent of America’s total energy consumption goes to producing plastic products.

Recycling plastic requires only about 10% of the energy needed to manufacture one pound of plastic from virgin sources. The recovery process has short-term energy-saving benefits because plastics degrade every time they are recycled.

plastic waste

However, many manufactures have ways of repurposing low-grade plastics to use in less demanding applications, such as carpeting, park benches, auto parts, and insulation.

Other Materials to Recycle Around Your Home

You can recycle many other materials around your home, and you can determine their energy savings using the iWARM tool created by the EPA. Some of these materials include

You can also contribute to energy conservation by purchasing recycled household products. Some of the most common include

  • Egg cartons
  • Newspapers
  • Comic books
  • Trash bags
  • Paper towels
  • Glass containers
  • Car bumpers

Bottom Line

Reduce, reuse, recycle is a lifestyle that leads us to a greener planet. Following these guidelines for a greener planet will also save you some coins because most recycled products cost significantly less than products produced using virgin material. Keep in mind that 75 percent of all waste can be recycled, and doing this will save the planet loads of energy.

Solid Waste Management in Nigeria

  By | | ,
29 Comments

Solid waste management is the most pressing environmental challenge faced by urban and rural areas of Nigeria. Nigeria, with population exceeding 170 million, is one of the largest producers of solid waste in Africa. Despite a host of policies and regulations, solid waste management in the country is assuming alarming proportions with each passing day.

waste-nigeria

Nigeria generates more than 32 million tons of solid waste annually, out of which only 20-30% is collected. Reckless disposal of MSW has led to blockage of sewers and drainage networks, and choking of water bodies. Most of the wastes is generated by households and in some cases, by local industries, artisans and traders which litters the immediate surroundings.

Improper collection and disposal of municipal wastes is leading to an environmental catastrophe as the country currently lack adequate budgetary provisions for the implementation of integrated waste management programmes across the States.

According to the United Nations Habitat Watch, African city populations will more than triple over the next 40 years. African cities are already inundated with slums; a phenomenon that could triple urban populations and spell disaster, unless urgent actions are initiated. Out of the 36 states and a federal capital in the country, only a few have shown a considerable level of resolve to take proactive steps in fighting this scourge, while the rest have merely paid lip services to issues of waste management indicating a huge lack of interest to develop the waste sector.

Scenario in Lagos

Lagos State, the commercial hub of Nigeria, is the second fastest growing city in Africa and seventh in the world.  The latest reports estimate its population to be more than 21 million making it the largest city in entire Africa.  With per capita waste generation of 0.5 kg per day, the city generates more than 10,000 tons of urban waste every day.

Despite being a model for other states in the country, municipal waste management is a big challenge for the Lagos State Waste Management Agency (LAWMA) to manage alone, hence the need to engage the services of private waste firms and other franchisee to reduce the burden of waste collection and disposal. One fundamental issue is the delayed collection of household solid waste.  In some cases, the wastes are not collected until after a week or two, consequently, the waste bin overflows and litters the surroundings.

Improper garbage disposal and lack of reliable transport infrastructure means that collected wastes are soon dispersed to other localities. Another unwelcome practice is to overload collection trucks with 5-6 tons of waste to reduce the number of trips; this has necessitated calls by environmental activist to prevail on the relevant legislature to conform to the modern waste transportation standard.

Situation in Oyo

Away from Lagos State, Oyo is another ancient town in Nigeria with an estimated population of six million people. Here, solid waste is regulated by the Oyo State Solid Waste Management Authority (OYOWMA). Unlike Lagos State, Oyo State does not have a proper waste management scheme that cuts across the nooks and crannies of the state, apart from Ibadan, the capital city, people from other towns like Ogbomoso and Iseyin resort to waste burning. In case the waste generators feels that the amount being charged by the waste franchisee is beyond their means, they dump the waste along flood paths thus compounding the waste predicament.

Burning of municipal wastes is a common practice in Nigeria

Burning of municipal wastes is a common practice in Nigeria

Kano and Rivers State with its fair share of population also suffers similar fate in controlling and managing solid waste. Generally speaking, population increase in Nigeria has led to an unprecedented growth in its economy but with a devastating effect on the environment as more wastes are generated due to the need for housing, manufacturing industries and a boost in trade volume.

Future Perspectives

The government at the federal level as a matter of urgency needs to revive its regulatory framework that will be attractive for private sectors to invest in waste collection, recycling and reusing.  The environmental health officer’s registration council of Nigeria would do well to intensify more effort to monitor and enforce sanitation laws as well as regulate the activities of the franchisees on good sustainable practices.

Taking the advocacy further on waste management, to avoid littering the environment, some manufacturing companies (e.g. chemical and paint industry) have introduced a recall process that will reward individuals who returns empty/used plastic containers. This cash incentive has been proven over time to validate the waste to wealth program embarked upon by the manufacturing companies. It is also expected that the government will build more composting and recycling plants in addition to the ones in Ekiti and Kano State to ensure good sustainable waste management.

Waste management situation in Nigeria currently requires concerted effort to sensitize the general public on the need for proper disposal of solid waste. Also, the officials should be well trained on professionalism, service delivery and ensure that other states within the country have access to quality waste managers who are within reach and can assist on the best approach to managing their waste before collection.

Why Do We Need Solid Waste Management?

  By | | ,
20 Comments

Some countries have achieved considerable success in solid waste management. But the rest of the world is grappling to deal with its wastes. In these places, improper management of solid waste continues to impact public health of entire communities and cities; pollute local water, air and land resources; contribute to climate change and ocean plastic pollution; hinder climate change adaptation; and accelerate depletion of forests and mines.

Garbage_Bangalore

Compared to solid waste management, we can consider that the world has achieved significant success in providing other basic necessities like food, drinking water, energy and economic opportunities. Managing solid wastes properly can help improve the above services further.

Composting of organic waste can help nurture crops and result in a better agricultural yield. Reducing landfilling and building sanitary landfills will reduce ground and surface water pollution which can help provide cleaner drinking water. Energy recovery from non-recyclable wastes can satiate significant portion of a city’s energy requirement.

Inclusive waste management where informal waste recyclers are involved can provide an enormous economic opportunity to the marginalized urban poor. Additionally, a good solid waste management plan with cost recovery mechanisms can free tax payers money for other issues. In the case of India, sustainable solid waste management in 2011 would have provided

  • 9.6 million tons of compost that could have resulted in a better agricultural yield
  • energy equivalent to 58 million barrels of oil from non-recyclable wastes
  • 6.7 million tons of secondary raw materials to industries in the form of recyclable materials and livelihood to the urban poor

Solid waste management until now has only been a social responsibility of the corporate world or one of the services to be provided by the municipality and a non-priority for national governments. However, in Mumbai, the improperly managed wastes generate 22,000 tons of toxic pollutants like particulate matter, carbon monoxide, nitrous and sulfur oxides in addition to 10,000 grams of carcinogenic dioxins and furans every year. These numbers are only for the city of Mumbai. This is the case in cities all across the developing world. There are numerous examples where groundwater is polluted by heavy metals and organic contaminants due to solid waste landfills.

Solid waste management expenditure of above $ 1 billion per year competes with education, poverty, security and other sustainable initiatives in New York City. Fossil fuels for above 500,000 truck trips covering hundreds of miles are required to transport NYC’s waste to landfills outside the city and state. Similarly, New Delhi spends more than half of its entire municipal budget on solid waste management, while it is desperate for investments and maintenance of roads, buildings, and other infrastructure.

Solid waste management is not just a corporate social responsibility or a non-priority service anymore. Improper waste management is a public health and environmental crisis, economic loss, operational inefficiency and political and public awareness failure. Integrated solid waste management can be a nation building exercise for healthier and wealthier communities. Therefore, it needs global attention to arrive at solutions which span across such a wide range of issues.

Recommended Reading: The Problems with Solid Waste Recycling Plants

Trends in Waste-to-Energy Industry

  By | | ,
5 Comments

The increasing clamor for energy and satisfying it with a combination of conventional and renewable resources is a big challenge. Accompanying energy problems in almost all parts of the world, another problem that is assuming critical proportions is that of urban waste accumulation. The quantity of waste produced all over the world amounted to more than 12 billion tonnes in 2006, with estimates of up to 13 billion tonnes in 2011. The rapid increase in population coupled with changing lifestyle and consumption patterns is expected to result in an exponential increase in waste generation of up to 18 billion tonnes by year 2020. Ironically, most of the wastes are disposed of in open fields, along highways or burnt wantonly.

Waste-to-Energy-Industry

Size of the Industry

Around 130 million tonnes of municipal solid waste (MSW) are combusted annually in over 600 waste-to-energy (WTE) facilities globally that produce electricity and steam for district heating and recovered metals for recycling. The global market for biological and thermochemical waste-to-energy technologies is expected to grow to USD 29.2 billion by 2022. Incineration, with energy recovery, is the most common waste-to-energy method employed worldwide.

Since 1995, the global WTE industry increased by more than 16 million tonnes of MSW. Over the last five years, waste incineration in Europe has generated between an average of 4% to 8% of their countries’ electricity and between an average of 10% to 15% of the continent’s domestic heat.

Advanced thermal technologies, like gasification and pyrolysis, and anaerobic digestion systems are beginning to make deep inroads in the waste-to-energy sector and are expected to increase their respective market shares on account of global interest in integrated waste management framework in urban areas. Scarcity of waste disposal sites coupled with growing waste volumes and solid waste management challenges are generating high degree of interest in energy-from-waste systems among policy-makers, urban planners, entrepreneurs, utility companies etc.

Regional Trends

Currently, the European nations are recognized as global leaders of waste-to-energy movement. They are followed behind by the Asia Pacific region and North America respectively. In 2007 there are more than 600 WTE plants in 35 different countries, including large countries such as China and small ones such as Bermuda. Some of the newest plants are located in Asia. China is witnessing a surge in waste-to-energy installations and has plans to establish 125 new waste-to-energy plants during the twelfth five-year plan ending 2015.

Incineration is the most common waste-to-energy method used worldwide.

The United States processes 14 percent of its trash in WTE plants. Denmark, on the other hand, processes more than any other country – 54 percent of its waste materials. As at the end of 2008, Europe had more than 475 WTE plants across its regions – more than any other continent in the world – that processes an average of 59 million tonnes of waste per annum. In the same year, the European WTE industry as a whole had generated revenues of approximately US$4.5bn.

Legislative shifts by European governments have seen considerable progress made in the region’s WTE industry as well as in the implementation of advanced technology and innovative recycling solutions. The most important piece of WTE legislation pertaining to the region has been the European Union’s Landfill Directive, which was officially implemented in 2001 which has resulted in the planning and commissioning of an increasing number of WTE plants over the past five years.

The Importance of Waste-to-Energy in Solid Waste Management

  By | | , ,
8 Comments

Waste-to-energy has been evolving over the years and there are many new developments in this technology, moving in mainly one direction – to be able to applied to smaller size waste streams. Not only is it a strategy that has real importance for the current public policy, it is a strategy that will definitely present itself to additional areas.

waste-management-energy

More than 50% of waste that is burnt in waste-to-energy facilities is already part of the short carbon cycle. In which case, it has an organic derivative and it doesn’t add to climate change, to begin with. The long form carbon that is burned, things like plastics that have come out of the ground in the form of oil do add to climate change. But, they have already been used once. They have already been extracted once and what we are doing is taking the energy out of them after that physical use, capturing some of that (energy), thereby offsetting more carbon from natural gas or oil or coal. So, the net effect is a reduction in carbon emissions.

Waste-to-energy and recycling are complementary depending on the results of analyses of the First and Second Laws of Thermodynamics, which are absolutely valid. One can decide in specific situations whether WTE or whether some type of recycling technology would be more appropriate. It is not an either/or option.

WTE_Plant_Belgium

Waste-to-Energy is now widely accepted as a part of sustainable waste management strategy.

In Austria, it was possible to have an absolute ban on landfilling wastes exceeding 5% organic carbon. This is written in law since 1996. There were some exceptions for some period of time, but landfills of organic wastes are just banned, not just in Austria but also in other cultures similar to Austria – like Switzerland, Sweden and Germany.

Note: This excerpt is being published with the permission of our collaborative partner Be Waste Wise.

Municipal Solid Wastes in Bahrain

  By | | ,
8 Comments

Bahrain has the distinction of being one of the highest per capita municipal solid waste generators worldwide estimated to be more than 1.80 kg per person per day. Infact, Bahrain produces largest amount of waste per person among GCC countries despite being the smallest nation in the region. Rising population, high waste generation growth rate, limited land availability and scarcity of waste disposal sites has made solid waste management a highly challenging task for Bahrain’s policy-makers, urban planners and municipalities.

Bahrain_Wastes

Municipal Solid Wastes in Bahrain

Bahrain generates more than 1.2 million tons of solid wastes every year. Daily garbage production across the tiny Gulf nation exceeds 4,500 tons. Municipal solid waste is characterized by high percentage of organic material (around 60 percent) which is mainly composed of food wastes.

Presence of high percent of recyclables in the form of paper (13 percent), plastics (7 percent) and glass (4 percent) makes Bahrain’s MSW a good recycling feedstock, though informal sectors are currently responsible for collection of collection of recyclables and recycling activities

The Kingdom of Bahrain is divided into five governorates namely Manama, Muharraq, Middle, Southern and Northern. Waste collection and disposal operation in Bahrain is managed by a couple of private contractors. The prevalent solid waste management scenario is to collect solid waste and dump it at the municipal landfill site at Askar.

Askar, the only existing landfill/dumpsite in Bahrain, caters to municipal wastes, agricultural wastes and non-hazardous industrial wastes. Spread over an area of more than 700 acres, the landfill is expected to reach its capacity within the next few years. The proximity of Askar landfill to urban habitats has been a cause of major environmental concern. Waste accumulation is increasing at a rapid pace which is bound to have serious impacts on air, soil and groundwater quality in the surrounding areas.

Conclusions

The Kingdom of Bahrain is grappling with waste management problems arising out of high population growth rate, rapid industrialization, high per capita waste generation, unorganized SWM sector, limited land resources and poor public awareness.

The government is trying hard to improve waste management scenario by launching recycling initiatives, waste-to-energy project and public awareness campaign. However more efforts, in the form of effective legislation, large-scale investments, modern SWM technology deployment and environmental awareness, are required from all stake holders to implement a sustainable waste management system in Bahrain.

Effective Ways to Minimize Waste on Construction Sites

  By | | , , ,
2 Comments

For some people, the whole thing of “going green” is a trend, but in the world of construction, “going green” is definitely no trend… In fact, it’s a sustainable building practice that’s here to stay. As more cities adopt greener building regulations for new construction, contractors and construction companies alike are going to face the challenge of keeping up with these sustainable building practices.

One of the biggest areas in construction that greener changes need to happen in is construction waste. They say, “waste not, want not,”… well, in the world of construction, “when you waste less, you spend less.” Sustainable building practices, in the form of minimizing waste, means you’re not only building better, energy-efficient buildings but you’re also saving time and money on all your construction projects.

It’s just amazing to look at how the industry has changed over the years. True enough, certain things haven’t changed like state and industry-specific certifications and licenses… If you live in Oregon, you would still need to meet the Oregon continuing education requirements. But as far as sustainable practices, it’s amazing how more and more people are becoming conscious about reducing their carbon footprint to make the environment a better place… Back in the early 1940s to the 1960s, people could have cared less about their environmental impact.

construction-waste

 

But we are indeed in different times, and the construction industry is doing its part to implement green practices, including reducing construction waste. Here’s how construction companies and contractors are doing their part.

Effective Ways to Minimize Your Construction Waste

1. Avoid Creating Waste in the First Place

To truly manage your construction waste effectively, you should avoid creating it in the first place. Taking steps like taking exact measurements to ensure you have enough materials to build without any unnecessary leftovers is going to help tremendously. Conducting regular inventory checks will prevent you from overordering materials that you already have.

Additionally, properly training your team and educating them on the importance of construction waste management will help them to implement greener practices within their own job responsibilities.

2. Store Your Materials Properly

With construction sites, you’re not always going to be able to haul your materials in and out of a proper storage area; sometimes your materials have to set out on the site. But that also doesn’t mean your materials have to be ruined. You have to first and foremost, secure your site to minimize damage and even theft.

construction-wastes

For example, you can store lumber on blocking and make sure to cover it up to prevent any damages. You want to do the same with brick and other masonry. The main thing is that your materials are a huge investment and you need to do all you can to protect your investment.

According to the National Equipment Register, states that have a large economy percentage in agriculture and construction industries are the biggest targets for thieves, and the most common pieces of equipment to steal include valuable pieces that are easy to move, like tractors, mowers, and other tools. Heavier pieces like bulldozers and backhoes aren’t so common because they’re too difficult to move.

3. Add Organization to Your Construction Site

Construction sites seem like they can be a bit chaotic, which they can, but they don’t have to be by simply adding a little organization to your site. Consider separating your recyclable and salvageable materials together in an area to reduce confusion; this just puts everyone on the same page. When your site is organized and your team knows where everything is, it will cause you to spend less money on unnecessary materials, re-doing work, and sorting in the middle of a project.

4. Recycle and Re-Use Your Salvageable Materials

On all of your construction sites, make it a point to recycle materials like paper, plastic, metal, and glass… wood too. In that same token, also make sure that if there’s a way to reduce any costs in construction projects, re-using your salvaged materials is the way to do it. The purpose is to reuse these materials so that they don’t end up in a landfill somewhere… You can’t always avoid waste on all projects but landfills are one of the worst ways to handle your construction site waste.

Know About Popular Waste to Energy Conversion Routes

  By | | ,
7 Comments

Waste-to-energy is the use of combustion and biological technologies to recover energy from urban wastes. There are three major waste to energy conversion routes – thermochemical, biochemical and physico-chemical. Thermochemical conversion, characterized by higher temperature and conversion rates, is best suited for lower moisture feedstock and is generally less selective for products. On the other hand, biochemical technologies are more suitable for wet wastes which are rich in organic matter.

Teesside-WTE-plant

Thermochemical Conversion of Waste

The three principal methods of thermochemical conversion of waste are combustion in excess air, gasification in reduced air, and pyrolysis in the absence of air. The most common technique for producing both heat and electrical energy from household wastes is direct combustion.

Combined heat and power (CHP) or cogeneration systems, ranging from small-scale technology to large grid-connected facilities, provide significantly higher efficiencies than systems that only generate electricity.

WTE_Pathways

Combustion technology is the controlled combustion of waste with the recovery of heat to produce steam which in turn produces power through steam turbines. Pyrolysis and gasification represent refined thermal treatment methods as alternatives to incineration and are characterized by the transformation of the waste into product gas as energy carrier for later combustion in, for example, a boiler or a gas engine. Plasma gasification, which takes place at extremely high temperature, is also hogging limelight nowadays.

Biochemical Conversion of Waste

Biochemical processes, like anaerobic digestion, can also produce clean energy in the form of biogas which can be converted to power and heat using a gas engine. Anaerobic digestion is the natural biological process which stabilizes organic waste in the absence of air and transforms it into biofertilizer and biogas.

Anaerobic digestion is a reliable technology for the treatment of wet, organic waste.  Organic waste from various sources is biochemically degraded in highly controlled, oxygen-free conditions circumstances resulting in the production of biogas which can be used to produce both electricity and heat.

anaerobic_digestion_plant

In addition, a variety of fuels can be produced from waste resources including liquid fuels, such as ethanol, methanol, biodiesel, Fischer-Tropsch diesel, and gaseous fuels, such as hydrogen and methane. The resource base for biofuel production is composed of a wide variety of forestry and agricultural resources, industrial processing residues, and municipal solid and urban wood residues. Globally, biofuels are most commonly used to power vehicles, heat homes, and for cooking.

Physico-chemical Conversion of Waste

The physico-chemical conversion of waste involves various processes to improve physical and chemical properties of solid waste. The combustible fraction of the waste is converted into high-energy fuel pellets which may be used in steam generation.

RDF pellet

The waste is first dried to bring down the high moisture levels. Sand, grit, and other incombustible matter are then mechanically separated before the waste is compacted and converted into fuel pellets or RDF.

Fuel pellets have several distinct advantages over coal and wood because it is cleaner, free from incombustibles, has lower ash and moisture contents, is of uniform size, cost-effective, and eco-friendly.

Role of Food Waste Disposers in Food Waste Management

  By | | , , ,
11 Comments

Food waste is a global issue that begins at home and as such, it is an ideal contender for testing out new approaches to behaviour change. The behavioural drivers that lead to food being wasted are complex and often inter-related, but predominantly centre around purchasing habits, and the way in which we store, cook, eat and celebrate food.

food-waste-management

Consumer Behavior – A Top Priority

Consumer behaviour is a huge priority area in particular for industrialised nations – it is estimated that some western societies might be throwing away up to a third of all food purchased. The rise of cheap food and convenience culture in recent years has compounded this problem, with few incentives or disincentives in place at producer, retail or consumer level to address this.

While it is likely that a number of structural levers – such as price, regulation, enabling measures and public benefits – will need to be pulled together in a coherent way to drive progress on this agenda, at a deeper level there is a pressing argument to explore the psycho-social perspectives of behaviour change.

Individual or collective behaviours often exist within a broader cultural context of values and attitudes that are hard to measure and influence. Simple one-off actions such as freezing leftovers or buying less during a weekly food shop do not necessarily translate into daily behaviour patterns. For such motivations to have staying power, they must become instinctive acts, aligned with an immediate sense of purpose. Click here to see what steps you can take to tackle this issue. The need to consider more broadly our behaviours and how they are implicated in such issues must not stop at individual consumers, but extend to governments, businesses and NGOs if effective strategies are to be drawn up.

Emergence of Food Waste Disposers

Food waste disposer (FWDs), devices invented and adopted as a tool of food waste management may now represent a unique new front in the fight against climate change. These devices, commonplace in North America, Australia and New Zealand work by shredding household or commercial food waste into small pieces that pass through a municipal sewer system without difficulty.

The shredded food particles are then conveyed by existing wastewater infrastructure to wastewater treatment plants where they can contribute to the generation of biogas via anaerobic digestion. This displaces the need for generation of the same amount of biogas using traditional fossil fuels, thereby averting a net addition of greenhouse gases (GHG) to the atmosphere.

Food waste is an ideal contender for testing new approaches to behaviour change.

The use of anaerobic digesters is more common in the treatment of sewage sludge, as implemented in the U.K., but not as much in the treatment of food waste. In addition to this, food waste can also replace methanol (produced from fossil fuels) and citric acid used in advanced wastewater treatment processes which are generally carbon limited.

Despite an ample number of studies pointing to the evidence of positive impacts of food waste disposer, concerns regarding its use still exist, notably in Europe. Scotland for example has passed legislation that bans use of FWDs, stating instead that customers must segregate their waste and make it available curbside for pickup. This makes it especially difficult for the hospitality industry, to which the use of disposer is well suited.

The U.S. however has seen larger scale adoption of the technology due to the big sales push it received in the 1950s and 60s. In addition to being just kitchen convenience appliances, FWDs are yet to be widely accepted as a tool for positive environmental impact.

Note: Note: This excerpt is being published with the permission of our collaborative partner Be Waste Wise.