Regular furnace tune-ups and maintenance just before the cold weather will help maintain your furnace and your HVAC system at top condition during the winter months. There are some common tips you can follow that will help ensure your furnace runs at peak efficiency through the long cold winter months:
Help ensure your furnace runs
It is suggested that all of your HVAC equipment be cleaned and maintained before winter arrives. Beginning in early fall, have all of your cooling and heating equipment checked over thoroughly. Have a professional come out and check the furnace’s blower and ducts as well. In addition to ensuring that these are running smoothly, this will also help to prevent an increase in your home’s utility bills. If there is a problem in any of these components, you’ll need to replace them before winter fully sets in.
Finally, once your furnace has been turned back on, you’ll need to check your heat exchanger and duct for leaks. If the duct is leaking, then you may need to call a professional to take care of the leak or replace it with new ductwork. If your heater is not properly vented, then there’s a good chance that mold is growing behind the burner or behind the ductwork. You may actually be causing a foul smell from your furnace. Instead of calling a furnace service technician to come out and make you a furnace filter replacement, why not do it yourself?
First, get a flashlight and inspect your furnace’s ducts for blockages or clogs. A regular flashlight with disinfectant should work just fine. Take note of any spots that seem unusual where the air flows through. The spot could be a filter or the blower, depending on which system the furnace uses. If you see any areas with a thick black stain or smell, that’s a good indicator to clean or change the filter.
Getting furnace repairs
Once the furnace is checked and cleaned, you should conduct furnace service at least once a year. If you think you can’t do it yourself, call a reputable company in your area to get the job done. The costs for getting furnace repairs will vary depending on the make and model of your furnace and even the age of it. If you have an older model, you will probably spend more money than if you have a newer one. There are different ways to save on furnace service costs, so make sure to ask a professional about any suggestions you might have.
Remember that the experts say it is important to have regular maintenance on your furnace. However, this is not something you should take for granted. It is important to remember that the malfunctioning of your furnace could be due to the fact that there is a dirty duct where the oil or air gap gets filled up and causes the furnace to work hard to push out the air. In this case, hiring the services of a skilled and experienced furnace repairman in Calgary is essential so you don’t have to worry too much about the furnace’s condition.
If the problem with the burner is due to the presence of mold and mildew on the exterior portion of the heat exchanger, you can safely clean it yourself using a disinfectant spray made of chlorine and water. The spray must be used carefully so as not to damage the internal components of the heat exchanger and the burner. You should wear protective gloves so that you don’t spray the chemicals directly into the eyes. You can spray the area in a circular motion to avoid leaving streaks. This may also help in keeping the lining of the heat exchanger clear and free from dust, which is a common cause of friction.
Cleaning of heat exchangers by furnace service technicians is often recommended by manufacturers as an additional measure to prevent loss of refrigerant gas and to keep temperatures constant. A clean line allows for easier access when maintenance is necessary and prevents potential damage to the heating system itself. The cleaning process can take place during the summer, at night, or on days when there is little else that should be done.
Central heating radiators are available in a wide variety of styles to match any decor and to meet any budget. Whether a radiator is new or old, its function should be the first thing to be considered before buying. The more that the space heated by the radiator is heated by electricity, the more efficient the unit will be. Radiators will also heat the entire room, which could be a major plus depending on your budget.