Why Should Your Company Commit to Renewable Power?

Roughly one-third of U.S. greenhouse gas emissions come from burning fossil fuels to create electricity, according to Climate Collaborative. Using non-renewable gas, oil and coal adds to a rapidly growing carbon footprint, increases global warming and spells disaster for our fragile planet’s future.

Companies and large corporations have the ability to change this, however, by committing to transition to renewable energy in the coming months and years. Not only will this benefit our planet, but it also promises success for companies who choose to commit to it.

Reduce energy costs by producing your own energy

Utility bills are a huge expense for businesses, many of which are at the mercy of utility companies that could raise their rates at any moment. Renewable energy is an attractive alternative to electricity and the bills that come with it. Wind installations are one option, but solar panels are even better as they are more predictable, efficient and affordable.

In fact, the cost of renewable energy is dropping at an incredibly rapid rate. The total cost of developing wind power has dropped 55% in the last five years while solar energy has dropped a shocking 74%. These low prices stem from massive global investment and rapid technological advancement. And major corporations that are already using clean energy are only looking to buy more in the coming months.

renewables-investment-trends

Boosting public relations

An increasing number of companies are committing to renewable power to boost public image. Smart businesses know that, in today’s world, renewable power is a source of competitive advantage. Social pressure to reduce emissions continues to rise as consumers look for ways to be involved in saving the planet. This green movement has driven a demand for green products. And companies that can sustainably create these products are winners in the public eye.

Renewable power is also reliable and predictable

Unlike coal or oil, we’ll never run out of wind or sun. This makes the cost and savings of wind and solar power quite stable. Solar panels installed on top of business structures will produce a consistent amount of energy year after year as long as they are properly maintained. This strong reliability makes budgeting easier and ensures a less volatile bottom line.

Reducing carbon emissions

Every one killowatt-hour of energy produced keeps 300 pounds of carbon out of the atmosphere. So, replacing non-renewable energy with renewable resources naturally decreases global warming emissions. And that’s good news for everyone on earth because if we’re left with more carbon than oxygen, it’s going to be a little difficult to breathe.

How Can You Commit to Renewable Power?

The first step in committing to renewable power is shifting your perspective. Take time to personally research these benefits of renewable power. Once you decide sustainable energy is worth implementing, on both an individual and global scale, you can begin to look for ways to create your own strategy.

The best way to brainstorm and execute strategy is to develop a team with specific goals in mind. This team should include members from different departments such as legal, financial, environmental, sustainability and operations. Once there is a team in place, you can begin to integrate energy into the company’s vision and operations.

The team should begin by assessing current energy impacts and how they might change them. Analyzing impact and comparing your own to competitors’ will reveal performance opportunities and gaps. The team can then develop a plan of action. Aggressive targets should reflect the degree and pace of emission reductions necessary to mitigate climate change.

Once goals are outlined, the team must create incentives for employees and consumers alike to make energy an actionable priority. From there, they can measure and manage energy usage as the company transitions from non-renewable to renewable energy sources.

How To Tackle Vibrations Using A Coriolis Mass Flow Meter

Coriolis mass flow meters are acknowledged or well-known as an extremely precise and accurate flow measuring device. Plus, it offers plenty of benefits than other instruments. But take note that every measuring principle has its obstacles, and it is also true for the Coriolis principle.

For the most part, it can be difficult and hard to use Coriolis devices in most low flow applications in industries manufacturing large and heavy products. In these applications, you might have to face all types of vibrations.

Thus, the question is, how can you deal with these vibrations using the coriolis mass flow meter. For a little help, we will walk you through how to deal with all types of vibrations. So, take a read!

Coriolis Principle

This flow measuring device provides multiple benefits and advantages compared to other measuring instruments. First and foremost, coriolis flow meters calculate or gauge direct mass flow.

For many industries, it is a critical feature because it removes or eradicates inaccuracies induced by the fluid’s physical properties or characteristics. Aside from this, coriolis flow meters are extremely precise and accurate, have no mechanical parts in motion, have immense repeatability, a towering dynamic range, and many more.

The coriolis principle is simple yet very effective. Its operating principle is all around us in this world, such as the rotation of the earth and its impact on the weather. Coriolis flow meters have a tube powered by a fixed vibration. So, when a liquid or gas traverses through this tunnel or duct, the mass flow momentum will, more often than not, create a change or alteration in the vibration of the tube.

Then, the duct will contort culminating a phase shift. This shift can be calculated or computed deriving a linear output corresponding to the flow. As the coriolis principle calculates mass flow regardless of what’s inside the tube, it can be, for the most part, promptly implemented to any fluid traversing through it, gas or liquid.

While the thermal mass flow instruments are reliant on the fluid’s physical properties, thus, similar to the phase shift in frequency between outlet and inlet, it’s possible to calculate the actual natural frequency change.

This frequency change is incongruity to the fluid’s density, and it can derive a further signal output. It’s possible to calculate the volume flow rate having computed both the density and the mass flow rate.

How it Works

Coriolis mass flow meters calculate or gauges the mass via inertia. A dense gas or liquid moves or traverse through a tunnel or duct which is pulsated by a small actuator. This vibration generates a measurable contorting force on the duct corresponding to the mass. More advanced models of this flow measuring technology apply dual-curved tunnels for lower pressure drop and higher sensitivity.

Although considered or known as the most precise flow meters, coriolis mass flow meters are prone to errors or inaccuracies when bubbles are existing in the liquid. These bubbles can produce or generate splashing inside the tube, make noise, and modify or alter the energy required for tube vibration. Huge spaces boost the energy required for tube vibration in excess and can end up in complete failure.

Impact of Vibrations on Accuracy of Coriolis Flow Meters

In manufacturing, factory, commercial, business, trade applications, all types of vibrations with various sizes are eminently common. Coriolis mass flow meters calculate a mass flow through a vibrating sensor duct, which variation gets purposely out of phase when the gas or liquid traverses through.

This technique or approach is relatively susceptible to unnecessary vibrations with a recurrence close to the sensor tube’s resonance frequency or a towering concordant of this frequency. However, it depends on the design of the sensor tube.

The odds of the frequency of these unnecessary vibrations is greater than in an industrial environment. Manufacturers of coriolis mass flow meters do their best to minimize the effect of vibrations on the measurement using some technical solutions including pigtails, active and passive vibration compensation, mass inertia, different sensor shapes, dual-sensor tubes, and higher driving frequencies.

In other words, vibrations can affect the accuracy of the measurements of coriolis mass flow meters. However, only if the frequency of the vibrations is close to the concordant frequency.

Types of Vibrations

In industrial applications, vibrations can be produced by usage-based vibration sources, building-based vibration sources, and environmentally related vibration sources. These vibrations move or traverse through a medium such as the fluid itself, through pipes, in the air, or the floor. If any of these vibrations disrupt the frequency of the device, then the output could be incorrect.

Takeaway

It is helpful to determine the sources to lessen or reduce the effects of unwanted vibrations. Oftentimes, it’s possible to move the measuring device or instrument just a little bit, take advantage of huge mass blocks, use suspension alternatives, or use flexible tubes.

About the Author

Sylvia Hopkins is a writer and a blogger who specializes in email marketing campaigns and ghost blogging. She writes about flow measurement instrumentation, flow measurement application, and technology. When not working, Sylvia spends some quality time with her family and friends.

Tips to Choose the Budget-Friendly System of Energy

Newly arrived at your new home, the first thing is to make sure that you are going to pay the bill for the area that is in your use. That’s why the first day in your new home is advisable to take the meter reading. Good time to introduce yourself to the president of the community … or whoever wants to keep the keys of the accounting room. This advice also applies to gas, water, and other supplies whether it’s new construction or used housing, you should take a meter reading.  Look for iselect energy website! When moving, the first thing is to take note of the different counters (light, water, gas) in order to take responsibility only for what you are going to consume.

When moving, the first thing is to take note of the different counters (light, water, gas) in order to take responsibility only for what you are going to consume.

Your freedom of choice is sacred

It is very important that you know that you are always entitled to choose your electric company freely. You decide you send.  You have bought a house, or you are renting, this is a right of every consumer to choose the budget-friendly ways for electricity consumption. It is so legitimate that you are interested in changing or continuing with the electric company that you are hired.

What can you choose?

 The company that will send your electricity bill, that is, the electric energy trader.

What can you not choose?

The company that is responsible for providing the energy to your home, that is, the distributor. You do not choose it because you have to choose the one that corresponds to your place of residence.

When you arrive at a new house, it may happen that:

  1. The light is discharged, and both the power and the rate seem appropriate:

If so, and if you want to continue being a client of the same marketer, all you have to do is change the owner of the contract. This procedure is simple, fast and free.

  1. The light is discharged, but the power seems excessive or insufficient

You will have to make a change of power. This procedure costs money, although lowering the power can save a lot on your bill.

  1. The electricity connection is registered, but you want to change the tariff

When you arrive, you can “inherit” a contract with a certain company and a certain rate. If what you find does not convince you, you are free to change your electric energy provider. It is your choice, which service you want to choose for your home.

  1. The light has no connection to the electricity network

If your supply point has not been used for more than 3 years, this procedure costs money. The contract of registration is processed with the distributor, but it is the distributor that installs the meter and activates the supply. For this reason, the payment of this procedure will be made to the distributor in the first invoice.

The payment procedure for the efficient electricity providers is very simple and easy for the consumers. You can pay your bills and others online via credit and debit card.