Category Archives: Biomass Energy

Biogas Sector in India: Perspectives

  By | | , , ,
4 Comments

Biogas is an often overlooked and neglected aspect of renewable energy in India. While solar, wind and hydropower dominate the discussion in the country, they are not the only options available. Biogas is a lesser known but highly important option to foster sustainable development in agriculture-based economies, such as India.

What is Biogas

Briefly speaking, biogas is the production of gaseous fuel, usually methane, by fermentation of organic material. It is an anaerobic process or one that takes place in the absence of oxygen. Technically, the yeast that causes your bread to rise or the alcohol in beer to ferment is a form of biogas. We don’t use it in the same way that we would use other renewable sources, but the idea is similar. Biogas can be used for cooking, lighting, heating, power generation and much more. Infact, biogas is an excellent and effective to promote development of rural and marginalized communities in all developing countries.

This presents a problem, however. The organic matter is putting off a gas, and to use it, we have to turn it into a liquid. This requires work, machinery and manpower. Research is still being done to figure out the most efficient methods to make it work, but there is a great deal of progress that has been made, and the technology is no longer new.

Fossil Fuel Imports

India has a rapidly expanding economy and the population to fit. This has created problems with electricity supplies to expanding areas. Like most countries, India mainly uses fossil fuels. However, as oil prices fluctuate and the country’s demand for oil grows, the supply doesn’t always keep up with the demand. In the past, India has primarily imported oil from the Middle East, specifically Saudi Arabia and Iraq.

Without a steady and sustainable fossil fuels supply, India has looking more seriously into renewable sources they can produce within the country. Biogas is an excellent candidate to meet those requirements and has been used for this goal before.

Biogas in India

There are significant differences between biogas and fossil fuels, but for India, one of the biggest is that you can create biogas at home. It’s pretty tricky to find, dig up and transform crude oil into gas, but biogas doesn’t have the same barriers. In fact, many farmers who those who have gardens or greenhouses could benefit with proper water management and temperature control so that plants can be grown year round, It still takes some learning and investment, but for many people, especially those who live in rural places, it’s doable.

This would be the most beneficial to people in India because it would help ease the strain of delivering reliable energy sources based on fossil fuels, and would allow the country to become more energy independent. Plus, the rural areas are places where the raw materials for biogas will be more available, such animal manure, crop residues and poultry litter. But this isn’t the first time most people there are hearing about it.

Biogas in India has been around for a long time. In the 1970’s the country began a program called the National Biogas and Manure Management Program (NBMMP) to deal with the same problem — a gas shortage. The country did a great deal of research and implemented a wide variety of ideas to help their people become more self-sufficient, regardless of the availability of traditional gasoline and other fossil fuel based products.

The original program was pioneering for its time, but the Chinese quickly followed suit and have been able to top the market in biogas production in relatively little time. Comparatively, India’s production of biogas is quite small. It only produces about 2.07 billion m3/year of biogas, while it’s estimated that it could produce as much as 48 billion m3/year. This means that there are various issues with the current method’s India is using in its biogas production.

Biogas_Animal

Biogas has the potential to rejuvenate India’s agricultural sector

The original planning in the NBMMP involved scientists who tried to create the most efficient biogas generators. This was good, but it slowed people’s abilities to adopt the techniques individually. China, on the other hand, explicitly worked to help their most rural areas create biogas. This allowed the country to spread the development of biogas to the most people with the lowest barriers to its proliferation.

If India can learn from the strategy that China has employed, they may be able to give their biogas production a significant boost which will also help in the rejuvenation of biomass sector in the country. Doing so will require the help and willingness of both the people and the government. Either way, this is an industry with a lot of room for growth.

An Introduction to Biomass Harvesting

  By | | , ,
12 Comments

Biomass harvesting and collection is an important step involving gathering and removal of the biomass from field which is dependent on the state of biomass, i.e. grass, woody, or crop residue. The moisture content and the end use of biomass also affect the way biomass is collected. For crop residues, the operations should be organized in sync with the grain harvest as it occupies the centerstage in farming process.

future of bioenergy

All of other operations such as residue management and collection take place after so-called grain is in the bin. On the other hand, the harvest and collection dedicated crops (grass and woody) can be staged for recovery of the biomass only. In agricultural processing, straw is the stems and leaves of small cereals while chaff is husks and glumes of seed removed during threshing.

 

Modern combine harvesters generally deliver straw and chaff together; other threshing equipment separates them. Stover is the field residues of large cereals, such as maize and sorghum. Stubble is the stumps of the reaped crop, left in the field after harvest.

Agro-industrial wastes are by-products of the primary processing of crops, including bran, milling offal, press cakes and molasses. Bran from on-farm husking of cereals and pulses are fed to livestock or foraged directly by backyard fowls.

The proportion of straw, or stover, to grain varies from crop to crop and according to yield level (very low grain yields have a higher proportion of straw) but is usually slightly over half the harvestable biomass. The height of cutting will also affect how much stubble is left in the field: many combine-harvested crops are cut high; crops on small-scale farms where straw is scarce may be cut at ground level by sickle or uprooted by hand.

Modern combine-harvesters generally deliver straw and chaff together

Collection involves operations pertaining to gathering, packaging, and transporting biomass to a nearby site for temporary storage. The amount of a biomass resource that can be collected at a given time depends on a variety of factors. In case of agricultural residues, these considerations include the type and sequence of collection operations, the efficiency of collection equipment, tillage and crop management practices, and environmental restrictions, such as the need to control erosion, maintain soil productivity, and maintain soil carbon levels.

Thermal Conversion of Biomass

  By | | , ,
11 Comments

A wide range of thermal technologies exists to harness the energy stored in biomass. These biomass thermal technologies can be classified according to the principal energy carrier produced in the conversion process. Carriers are in the form of heat, gas, liquid and/or solid products, depending on the extent to which oxygen is admitted to the conversion process (usually as air). The major methods for thermal conversion of biomass are combustion, gasification and pyrolysis.

biomass-gasification

1. Combustion

Conventional combustion technologies raise steam through the combustion of biomass. This steam may then be expanded through a conventional turbo-alternator to produce electricity. A number of combustion technology variants have been developed. Underfeed stokers are suitable for small scale boilers up to 6 MWth.

Grate type boilers are widely deployed. They have relatively low investment costs, low operating costs and good operation at partial loads. However, they can have higher NOx emissions and decreased efficiencies due to the requirement of excess air, and they have lower efficiencies.

Fluidized bed combustors (FBC), which use a bed of hot inert material such as sand, are a more recent development. Bubbling FBCs are generally used at 10-30 MWth capacity, while Circulating FBCs are more applicable at larger scales. Advantages of FBCs are that they can tolerate a wider range of poor quality fuel, while emitting lower NOx levels.

2. Co-Firing

Co-firing or co-combustion of biomass wastes with coal and other fossil fuels can provide a short-term, low-risk, low-cost option for producing renewable energy while simultaneously reducing the use of fossil fuels. Co-firing involves utilizing existing power generating plants that are fired with fossil fuel (generally coal), and displacing a small proportion of the fossil fuel with renewable biomass fuels.

types-of-biomass-cofiring

Co-firing has the major advantage of avoiding the construction of new, dedicated, waste-to-energy power plant. Co-firing may be implemented using different types and percentages of wastes in a range of combustion and gasification technologies. Most forms of biomass wastes are suitable for co-firing. These include dedicated municipal solid wastes, wood waste and agricultural residues such as straw and husk.

3. Gasification

Gasification of biomass takes place in a restricted supply of oxygen and occurs through initial devolatilization of the biomass, combustion of the volatile material and char, and further reduction to produce a fuel gas rich in carbon monoxide and hydrogen. This combustible gas has a lower calorific value than natural gas but can still be used as fuel for boilers, for engines, and potentially for combustion turbines after cleaning the gas stream of tars and particulates.

Biomass_Gasification_Process

Layout of a Typical Biomass Gasification Plant

If gasifiers are ‘air blown’, atmospheric nitrogen dilutes the fuel gas to a level of 10-14 percent that of the calorific value of natural gas. Oxygen and steam blown gasifiers produce a gas with a somewhat higher calorific value. Pressurized gasifiers are under development to reduce the physical size of major equipment items.

A variety of gasification reactors have been developed over several decades. These include the smaller scale fixed bed updraft, downdraft and cross flow gasifiers, as well as fluidized bed gasifiers for larger applications. At the small scale, downdraft gasifiers are noted for their relatively low tar production, but are not suitable for fuels with low ash melting point (such as straw). They also require fuel moisture levels to be controlled within narrow levels.

4. Pyrolysis

Pyrolysis is the term given to the thermal degradation of wood in the absence of oxygen. It enables biomass to be converted to a combination of solid char, gas and a liquid bio-oil. Pyrolysis technologies are generally categorized as “fast” or “slow” according to the time taken for processing the feed into pyrolysis products. These products are generated in roughly equal proportions with slow pyrolysis. Using fast pyrolysis, bio-oil yield can be as high as 80 percent of the product on a dry fuel basis.

Biomass-Pyrolysis

Bio-oil can act as a liquid fuel or as a feedstock for chemical production. A range of bio-oil production processes are under development, including fluid bed reactors, ablative pyrolysis, entrained flow reactors, rotating cone reactors, and vacuum pyrolysis.

The Energy Potential of Palm Kernel Shells

  By | | , ,
14 Comments

The Palm Oil industry in Southeast Asia and Africa generates large quantity of biomass wastes whose disposal is a challenging task. Palm kernel shells (or PKS) are the shell fractions left after the nut has been removed after crushing in the Palm Oil mill. Kernel shells are a fibrous material and can be easily handled in bulk directly from the product line to the end use. Large and small shell fractions are mixed with dust-like fractions and small fibres. Moisture content in kernel shells is low compared to other biomass residues with different sources suggesting values between 11% and 13%.

palm-kernel-shells

Palm kernel shells contain residues of Palm Oil, which accounts for its slightly higher heating value than average lignocellulosic biomass. Compared to other residues from the industry, it is a good quality biomass fuel with uniform size distribution, easy handling, easy crushing, and limited biological activity due to low moisture content. PKS can be readily co-fired with coal in grate fired -and fluidized bed boilers as well as cement kilns in order to diversify the fuel mix.

The primary use of palm kernel shells is as a boiler fuel supplementing the fibre which is used as primary fuel. In recent years kernel shells are sold as alternative fuel around the world. Besides selling shells in bulk, there are companies that produce fuel briquettes from shells which may include partial carbonisation of the material to improve the combustion characteristics.

As a raw material for fuel briquettes, palm shells are reported to have the same calorific characteristics as coconut shells. The relatively smaller size makes it easier to carbonise for mass production, and its resulting palm shell charcoal can be pressed into a heat efficient biomass briquette.

Palm kernel shells have been traditionally used as solid fuels for steam boilers in palm oil mills across Southeast Asia. The steam generated is used to run turbines for electricity production. These two solid fuels alone are able to generate more than enough energy to meet the energy demands of a palm oil mill. Most palm oil mills in the region are self-sufficient in terms of energy by making use of kernel shells and mesocarp fibers in cogeneration.

In recent years, the demand for palm kernel shells has increased considerably in Europe, Asia-Pacific, China etc. resulting in price close to that of coal. Nowadays, cement industries and power producers are increasingly using palm kernel shells to replace coal. In grate-fired boiler systems, fluidized-bed boiler systems and cement kilns, palm kernel shells are an excellent fuel.

Cofiring of PKS yields added value for power plants and cement kilns, because the fuel significantly reduces carbon emissions – this added value can be expressed in the form of renewable energy certificates, carbon credits, etc. However, there is a great scope for introduction of high-efficiency cogeneration systems in the industry which will result in substantial supply of excess power to the public grid and supply of surplus PKS to other nations. Palm kernel shell is already extensively in demand domestically by local industries for meeting process heating requirements, thus creating supply shortages in the market.

Palm oil mills around the world may seize an opportunity to supply electricity for its surrounding plantation areas using palm kernel shells, empty fruit branches and palm oil mill effluent which have not been fully exploited yet. This new business will be beneficial for all parties, increase the profitability and sustainability for palm oil industry, reduce greenhouse gas emissions and increase the electrification ratio in surrounding plantation regions.

Sugarcane Trash – A Renewable Fuel of Today and Future

  By | | , ,
4 Comments

In Indian sugar mills, the frequent cycles of ups and downs in the core business of selling sugar has led to the concentration towards the trend of ancillary businesses, like cogeneration power plant and ethanol production, becoming the profit centres. These units, which were introduced as a means to manage sugar mills’ own byproduct, like bagasse, are now keeping several sugar mills financially afloat. Thus, the concept of ‘Integrated Sugar Mill Complex’ has now become a new normal.

Limitations of Bagasse

Bagasse is a ubiquitous primary fuel in cogeneration plants in sugar mills, which adds more than 2,000 MW of renewable power to the Indian energy mix. The inclination of cogeneration plant managers towards bagasse is primarily because of its virtue of being easily available on-site, and no requirement to purchase it from the external market.

This remains true despite its several significant shortcomings as a boiler fuel, prime among which are very high moisture content and low calorific value. As a result, the fuel-to-energy ratio remains abysmally low and the consequent lesser power generation is depriving these sugar mills from achieving true revenue potential from their ancillary power business vertical, which is pegged at ~10,000 MW.

Sugarcane Trash – A Wonder Waste

Though, there is a much neglected high calorific value biomass which is available in proximity of every sugar mill and is also a residue of the sugarcane crop itself, which could enable the cogeneration units to achieve their maximum output potential. This wonder waste is sugarcane trash – the dry leaves of sugarcane crop – which is left in the farms itself after sugarcane harvesting as it has no utility as fodder and generally burnt by farmers, which harms the surrounding air quality substantially.

Given its favourable properties of having very low moisture content with moderate-to-high calorific value, sugarcane trash could be used in most of the high pressure boiler designs in a considerable proportion along with bagasse.

cane-trash

Undeniably, sugar mills should not discontinue using bagasse as the primary fuel, but surely complement it with sugarcane trash as it would lead to an increase in their revenue generation and would also allow them to expand operations of their cogeneration plant to off-season, as using sugarcane trash with bagasse in season would leave more bagasse for off-season usage.

Hurdles to Overcome

Despite these evident benefits, the major obstacle in development of sugarcane trash as an industrial boiler fuel has been its difficult collection from thousands of small and fragmented farms. Moreover, the trash becomes available and needs to be collected simultaneously during the operating season of the sugar mills, which makes deployment of resources, human or otherwise, for managing the procurement of trash very difficult for any sugar mill.

As a matter of fact, the sugar mills which initiated the pilots, or even scaled commercially, to utilise sugarcane trash along with bagasse, had to sooner or later discontinue its use, owing to the mammoth challenges discussed above.

The Way Forward

Thus, in order to utilise this wonder waste, there is a dire need to outsource its procurement to professional and organised players which establish the biomass supply chain infrastructure in the vicinity of the cogeneration units to make on-site availability of sugarcane trash as convenient as bagasse and enable them to procure the rich quality biomass at sustainable prices which leads to an increase in their profits.

sugarcane-trash-burning

Burning of cane trash creates pollution in sugar-producing countries

These biomass supply chain companies offer value to the farmers by processing their crop residues in timely manner, thus prevent open burning of the crop residue and contribute to a greener and cleaner environment.

Indeed, owing to its favourable fuel properties, positive environmental impact and now, with ease in its procurement, sugarcane trash is the renewable fuel of today and future for the Indian sugar mills.

Overview of Biomass Handling Equipment

  By | | , ,
7 Comments

The physical handling of biomass fuels during collection or at a processing plant can be challenging task, particularly for solid biomass. Biomass fuels tend to vary with density, moisture content and particle size and can also be corrosive. Therefore biomass fuel handling equipment is often a difficult part of a plant to adequately design, maintain and operate.

Biomass_Conveyor

The design and equipment choice for the fuel handling system, including preparation and refinement systems is carried out in accordance with the plant configuration. This is of special importance when the biomass is not homogeneous and contains impurities, typically for forest and agricultural wastes. Some of the common problems encountered have been the unpopular design and undersized fuel handling, preparation and feeding systems.

The fuel handling core systems and equipment are dependent on both the raw fuel type and condition as well as on the conversion/combustion technology employed. The core equipment in a biomass power plant include the following:

  1. Fuel reception
  2. Fuel weighing systems
  3. Receiving bunkers
  4. Bunker discharge systems (stoker, screw, grab bucket)
  5. Fuel preparation
  6. Fuel drying systems
  7. Crushers
  8. Chippers
  9. Screening systems
  10. Shredding systems
  11. Grinding systems (for pulverised fuel burners)
  12. Safety systems (explosion relieve, emergency discharge, fire detections etc)
  13. Fuel transport and feeding
  14. Push floors
  15. Belt feeders
  16. Conveyers and Elevators
  17. Tube feeders
  18. Fuel hoppers and silos (refined fuel)
  19. Hopper, bunker and silo discharge
  20. Feeding stokers
  21. Feeding screws
  22. Rotary valves

To enable any available biomass resource to be matched with the end use energy carrier required (heat, electricity or transport fuels) the correct selection of conversion technologies is required. Since the forms in which biomass can be used for energy are diverse, optimal resources, technologies and entire systems will be shaped by local conditions, both physical and socio-economic in nature.

As the majority of people in developing countries will continue using biomass as their primary energy source well into the next century, it is of critical importance that biomass-based energy truly can be modernized to yield multiple socioeconomic and environmental benefits.

Biomass Pelletization Process

  By | | ,
7 Comments

Biomass pellets are a popular type of biomass fuel, generally made from wood wastes, agricultural biomass, commercial grasses and forestry residues. In addition to savings in transportation and storage, pelletization of biomass facilitates easy and cost effective handling. Dense cubes pellets have the flowability characteristics similar to those of cereal grains. The regular geometry and small size of biomass pellets allow automatic feeding with very fine calibration. High density of pellets also permits compact storage and rational transport over long distance. Pellets are extremely dense and can be produced with a low moisture content that allows them to be burned with very high combustion efficiency.

biomass-pellets

Biomass pelletization is a standard method for the production of high density, solid energy carriers from biomass. Pellets are manufactured in several types and grades as fuels for electric power plants, homes, and other applications. Pellet-making equipment is available at a variety of sizes and scales, which allows manufacture at domestic as well industrial-scale production. Pellets have a cylindrical shape and are about 6-25 mm in diameter and 3-50 mm in length. There are European standards for biomass pellets and raw material classification (EN 14961-1, EN 14961-2 and EN 14961-6) and international ISO standards under development (ISO/DIS 17225-1, ISO/DIS 17225-2 and ISO/DIS 17225-6).

Process Description

The biomass pelletization process consists of multiple steps including raw material pre-treatment, pelletization and post-treatment. The first step in the pelletization process is the preparation of feedstock which includes selecting a feedstock suitable for this process, its filtration, storage and protection. Raw materials used are sawdust, wood shavings, wood wastes, agricultural residues like straw, switchgrass etc. Filtration is done to remove unwanted materials like stone, metal, etc. The feedstock should be stored in such a manner that it is away from impurities and moisture. In cases where there are different types of feedstock, a blending process is used to achieve consistency.

The moisture content in biomass can be considerably high and are usually up to 50% – 60% which should be reduced to 10 to 15%. Rotary drum dryer is the most common equipment used for this purpose. Superheated steam dryers, flash dryers, spouted bed dryers and belt dryers can also be used. Drying increases the efficiency of biomass and it produces almost no smoke on combustion. It should be noted that the feedstock should not be over dried, as a small amount of moisture helps in binding the biomass particles. The drying process is the most energy intensive process and accounts for about 70% of the total energy used in the pelletization process.

Schematic of Pelletization of Woody Biomass

Before feeding biomass to pellet mills, the biomass should be reduced to small particles of the order of not more than 3mm. If the pellet size is too large or too small, it affects the quality of pellet and in turn increases the energy consumption. Therefore the particles should have proper size and should be consistent. Size reduction is done by grinding using a hammer mill equipped with a screen of size 3.2 to 6.4 mm. If the feedstock is quite large, it goes through a chipper before grinding.

The next and the most important step is pelletization where biomass is compressed against a heated metal plate (known as die) using a roller. The die consists of holes of fixed diameter through which the biomass passes under high pressure. Due to the high pressure, frictional forces increase, leading to a considerable rise in temperature. High temperature causes the lignin and resins present in biomass to soften which acts as a binding agent between the biomass fibers. This way the biomass particles fuse to form pellets.

The rate of production and electrical energy used in the pelletization of biomass are strongly correlated to the raw material type and processing conditions such as moisture content and feed size. The The average energy required to pelletize biomass is roughly between 16 kWh/t and 49kWh/t. During pelletization, a large fraction of the process energy is used to make the biomass flow into the inlets of the press channels.

Binders or lubricants may be added in some cases to produce higher quality pellets. Binders increase the pellet density and durability. Wood contains natural resins which act as a binder. Similarly, sawdust contains lignin which holds the pellet together. However, agricultural residues do not contain much resins or lignin, and so a stabilizing agent needs to be added in this case. Distillers dry grains or potato starch is some commonly used binders. The use of natural additives depends on biomass composition and the mass proportion between cellulose, hemicelluloses, lignin and inorganics.

Due to the friction generated in the die, excess heat is developed. Thus, the pellets are very soft and hot (about 70 to 90oC). It needs to be cooled and dried before its storage or packaging. The pellets may then be passed through a vibrating screen to remove fine materials. This ensures that the fuel source is clean and dust free.

The pellets are packed into bags using an overhead hopper and a conveyor belt. Pellets are stored in elevated storage bins or ground level silos. The packaging should be such that the pellets are protected from moisture and pollutants. Commercial pellet mills and other pelletizing equipment are widely available across the globe.

Everything You Should Know About An Algae Biorefinery

  By | | , ,
7 Comments

High oil prices, competing demands between foods and other biofuel sources, and the world food crisis, have ignited interest in algaculture (farming of algae) for making vegetable oil, biodiesel, bioethanol, biogasoline, biomethanol, biobutanol and other biofuels. Algae can be efficiently grown on land that is not suitable for agriculture and hold huge potential to provide a non-food, high-yield source of biodiesel, ethanol and hydrogen fuels.

algae-biorefinery

Several recent studies have pointed out that biofuel from microalgae has the potential to become a renewable, cost-effective alternative for fossil fuel with reduced impact on the environment and the world supply of staple foods, such as wheat, maize and sugar.

What are Algae?

Algae are unicellular microorganisms, capable of photosynthesis. They are one of the world’s oldest forms of life, and it is strongly believed that fossil oil was largely formed by ancient microalgae. Microalgae (or microscopic algae) are considered as a potential oleo-feedstock, as they produce lipids through photosynthesis, i.e. using only carbon, water, sunlight, phosphates, nitrates and other (oligo) elements that can be found in residual waters.

Oils produced by diverse algae strains range in composition. For the most part are like vegetable oils, though some are chemically similar to the hydrocarbons in petroleum.

Advantages of Algae

Apart from lipids, algae also produce proteins, isoprenoids and polysaccharides. Some strains of algae ferment sugars to produce alcohols, under the right growing conditions. Their biomass can be processed to different sorts of chemicals and polymers (Polysaccharides, enzymes, pigments and minerals), biofuels (e.g. biodiesel, alkanes and alcohols), food and animal feed (PUFA, vitamins, etc.) as well as bioactive compounds (antibiotics, antioxidant and metabolites) through down-processing technology such as transesterification, pyrolysis and continuous catalysis using microspheres.

Algae can be grown on non-arable land (including deserts), most of them do not require fresh water, and their nutritional value is high. Extensive R&D is underway on algae as raw material worldwide, especially in North America and Europe with a high number of start-up companies developing different options.

Most scientific literature suggests an oil production potential of around 25-50 ton per hectare per year for relevant algae species. Microalgae contain, amongst other biochemical, neutral lipids (tri-, di-, monoglycerides free fatty acids), polar lipids (glycolipids, phospholipids), wax esters, sterols and pigments. The total lipid content in microalgae varies from 1 to 90 % of dry weight, depending on species, strain and growth conditions.

What is Algae Biorefinery

In order to develop a more sustainable and economically feasible process, all biomass components (e.g. proteins, lipids, carbohydrates) should be used and therefore biorefining of microalgae is very important for the selective separation and use of the functional biomass components.

The term algae biorefinery was coined to describe the production of a wide range of chemicals and biofuels from algal biomass by the integration of bio-processing and appropriate low environmental impact chemical technologies in a cost-effective and environmentally sustainable.

If biorefining of microalgae is applied, lipids should be fractionated into lipids for biodiesel, lipids as a feedstock for the chemical industry and essential fatty acids, proteins and carbohydrates for food, feed and bulk chemicals, and the oxygen produced can be recovered as well.

The potential for commercial algae production, also known as algaculture, is expected to come from growth in translucent tubes or containers called photo bioreactors or in open systems (e.g. raceways) particularly for industrial mass cultivation or more recently through a hybrid approach combining closed-system pre-cultivation with a subsequent open-system.

Advantages of Algae Biorefinery

The major advantages of an algae biorefinery include:

  • Use of industrial refusals as inputs ( CO2,wastewater and desalination plant rejects)
  • Large product basket with energy-derived (biodiesel, methane, ethanol and hydrogen) and non-energy derived (nutraceutical, fertilizers, animal feed and other bulk chemicals) products.
  • Not competing with food production (non-arable land and no freshwater requirements)
  • Better growth yield and lipid content than crops.

Indeed, after oil extraction the resulting algal biomass can be processed into ethanol, methane, livestock feed, used as organic fertilizer due to its high N:P ratio, or simply burned for energy cogeneration (electricity and heat). If, in addition, production of algae is done on residual nutrient feedstock and CO2, and production of microalgae is done on large scale in order to lower production costs, production of bulk chemicals and fuels from microalgae will become economically, environmentally and ethically extremely attractive.

The Logistics of a Biomass Power Plant

  By | | , , ,
7 Comments

Biomass logistics involves all the unit operations necessary to move biomass wastes from the land to the biomass energy plant. The biomass can be transported directly from farm or from stacks next to the farm to the processing plant. Biomass may be minimally processed before being shipped to the plant, as in case of biomass supply from the stacks. Generally the biomass is trucked directly from farm to the biomass processing facility if no processing is involved.

biomass_logistics

Another option is to transfer the biomass to a central location where the material is accumulated and subsequently dispatched to the energy conversion facility. While in depot, the biomass could be pre-processed minimally (ground) or extensively (pelletized). The depot also provides an opportunity to interface with rail transport if that is an available option. The choice of any of the options depends on the economics and cultural practices. For example in irrigated areas, there is always space on the farm (corner of the land) where quantities of biomass can be stacked.

The key components to reduce costs in harvesting, collecting and transportation of biomass can be summarized as:

  • Reduce the number of passes through the field by amalgamating collection operations.
  • Increase the bulk density of biomass
  • Work with minimal moisture content.
  • Granulation/pelletization is the best option, though the existing technology is expensive.
  • Trucking seems to be the most common mode of biomass transportation option but rail and pipeline may become attractive once the capital costs for these transport modes are reduced.

The logistics of transporting, handling and storing the bulky and variable biomass material for delivery to the biopower plant is a key part of the biomass supply chain that is often overlooked by project developers. Whether the biomass comes from forest residues on hill country, straw residues from cereal crops grown on arable land, or the non-edible components of small scale, subsistence farming systems, the relative cost of collection will be considerable.

Careful development of a system to minimize machinery use, human effort and energy inputs can have a considerable impact on the cost of the biomass as delivered to the biomass processing plant gate.

The logistics of supplying a biomass power plant with consistent and regular volumes of biomass are complex.

Most of the agricultural biomass resources tend to have a relatively low energy density compared with fossil fuels. This often makes handling, storage and transportation more costly per unit of energy carried. Some crop residues are often not competitive because the biomass resource is dispersed over large areas leading to high collection and transport costs.

The costs for long distance haulage of bulky biomass will be minimized if the biomass can be sourced from a location where it is already concentrated, such as sugar mill. It can then be converted in the nearby biomass energy plant to more transportable forms of energy carrier if not to be utilized on-site.

The logistics of supplying a biopower plant with sufficient volumes of biomass from a number of sources at suitable quality specifications and possibly all year round, are complex. Agricultural residues can be stored on the farm until needed. Then they can be collected and delivered directly to the conversion plant on demand. At times this requires considerable logistics to ensure only a few days of supply are available on-site but that the risk of non-supply at any time is low.

Losses of dry matter, and hence of energy content, commonly occur during the harvest transport and storage process. This can either be from physical losses of the biomass material in the field during the harvest operation or dropping off a truck, or by the reduction of dry matter of biomass material which occurs in storage over time as a result of respiration processes and as the product deteriorates. Dry matter loss is normally reduced over time if the moisture content of the biomass can be lowered or oxygen can be excluded in order to constrain pathological action.

To ensure sufficient and consistent biomass supplies, all agents involved with the production, collection, storage, and transportation of biomass require compensation for their share of costs incurred. In addition, a viable biomass production and distribution system must include producer incentives, encouraging them to sell their post-harvest plant residue.

Things You Should Know About the Different Uses of Biochar

  By | | , , ,
4 Comments

Biochar is a carbon-rich, fine-grained residue which can be produced either by ancient techniques (such as covering burning biomass with soil and allowing it to smoulder) or state-of-the-art modern biomass pyrolysis processes. Combustion and decomposition of woody biomass and agricultural residues results in the emission of a large amount of carbon dioxide. Biochar can store this CO2 in the soil leading to reduction in GHGs emission and enhancement of soil fertility.

Biochar holds the promise to tackle chronic human development issues like hunger and food insecurity, low agricultural productivity and soil depletion, deforestation and biodiversity loss, energy poverty, water pollution, air pollution and climate change. Let us have a close look at some of the most promising applications of biochar.

 

1. Use of biochar in animal farming

At present approx. 90% of the biochar used in Europe goes into animal farming. Different to its application to fields, a farmer will notice its effects within a few days. Whether used in feeding, litter or in slurry treatment, a farmer will quickly notice less smell. Used as a feed supplement, the incidence of diarrhoea rapidly decreases, feed intake is improved, allergies disappear, and the animals become calmer.

In Germany, researchers conducted a controlled experiment in a dairy that was experiencing a number of common health problems: reduced performance, movement disorder, fertility disorders, inflammation of the urinary bladder, viscous salivas, and diarrhoea. Animals were fed different combinations of charcoal, sauerkraut juice or humic acids over periods of 4 to 6 weeks.

Experimenters found that oral application of charcoal (from 200 to 400 g/day), sauerkraut juice and humic acids influenced the antibody levels to C. botulinum, indicating reduced gastrointestinal neurotoxin burden. They found that when the feed supplements were ended, antibody levels increased, indicating that regular feeding of charcoal and other supplements had a tonic effect on cow health.

2. Biochar as soil conditioner

In certain poor soils (mainly in the tropics), positive effects on soil fertility were seen when applying untreated biochar. These include the higher capacity of the soil to store water, aeration of the soil and the release of nutrients through raising the soil’s pH value. In temperate climates, soils tend to have humus content of over 1.5%, meaning that such effects only play a secondary role.

Indeed, fresh biochar may adsorb nutrients in the soil, causing at least in the short and medium term – a negative effect on plant growth. These are the reasons why in temperate climates biochar should only be used when first loaded with nutrients and when the char surfaces have been activated through microbial oxidation.

The best method of loading nutrients is to co-compost the char. This involves adding 10–30% biochar (by volume) to the biomass to be composted. Co-composting improves both the biochar and the compost. The resulting compost can be used as a highly efficient substitute for peat in potting soil, greenhouses, nurseries and other special cultures.

Because biochar serves as a carrier for plant nutrients, it can produce organic carbon-based fertilizers by mixing biochar with such organic waste as wool, molasses, ash, slurry and pomace. These are at least as efficient as conventional fertilizers, and have the advantage of not having the well-known adverse effects on the ecosystem. Such fertilizers prevent the leaching of nutrients, a negative aspect of conventional fertilizers. The nutrients are available as and when the plants need them. Through the stimulation of microbial symbiosis, the plant takes up the nutrients stored in the porous carbon structure and on its surfaces.

A range of organic chemicals are produced during pyrolysis. Some of these remain stuck to the pores and surfaces of the biochar and may have a role in stimulating a plant’s internal immune system, thereby increasing its resistance to pathogens. The effect on plant defence mechanisms was mainly observed when using low temperature biochars (pyrolysed at 350° to 450°C). This potential use is, however, only just now being developed and still requires a lot of research effort.

3. Biochar as construction material

The two interesting properties of biochar are its extremely low thermal conductivity and its ability to absorb water up to 6 times its weight. These properties mean that biochar is just the right material for insulating buildings and regulating humidity. In combination with clay, but also with lime and cement mortar, biochar can be added to clay at a ratio of up to 50% and replace sand in lime and cement mortars. This creates indoor plasters with excellent insulation and breathing properties, able to maintain humidity levels in a room at 45–70% in both summer and winter. This in turn prevents not just dry air, which can lead to respiratory disorders and allergies, but also dampness and air condensing on the walls, which can lead to mould developing.

As per study by the Ithaka Institute’s biochar-plaster wine cellar and seminar rooms in the Ithaka Journal. Such biochar-mud plaster adsorbs smells and toxins, a property not just benefiting smokers. Biochar-mud plasters can improve working conditions in libraries, schools, warehouses, factories and agricultural buildings.

Biochar is an efficient adsorber of electromagnetic radiation, meaning that biochar-mud plaster can prevent “electrosmog”. Biochar can also be applied to the outside walls of a building by jet-spray technique mixing it with lime. Applied at thicknesses of up to 20 cm, it is a substitute for Styrofoam insulation. Houses insulated this way become carbon sinks, while at the same time having a more healthy indoor climate. Should such a house be demolished at a later date, the biochar-mud or biochar-lime plaster can be recycled as a valuable compost additive.

4. Biochar as decontaminant

As a soil additive for soil remediation – for use in particular on former mine-works, military bases and landfill sites.

Soil substrates – Highly adsorbing and effective for plantation soil substrates for use in cleaning wastewater; in particular urban wastewater contaminated by heavy metals.

A barrier preventing pesticides getting into surface water – berms around fields and ponds can be equipped with 30-50 cm deep barriers made of biochar for filtering out pesticides.

Treating pond and lake water – biochar is good for adsorbing pesticides and fertilizers, as well as for improving water aeration.

5. Use of biochar in wastewater treatment – Our Project

The biochar grounded to a particle size of less than 1.5 mm and surface area of 600 – 1000 m2/g. The figure below is the basic representation of production of biochar for wastewater treatment.

We conducted a study for municipal wastewater which was obtained from a local municipal treatment plant. The municipal wastewater was tested for its physicochemical parameters including pH, chemical oxygen demand (COD), total suspended solids (TSS), total phosphates (TP) and total Kjeldahl nitrogen (TKN) using the APHA (2005) standard methods.

Bio filtration of the municipal wastewater with biochar acting as the bio adsorbent was allowed to take place over a 5 day period noting the changes in the wastewater parameters. The municipal wastewater and the treated effluent physicochemical.

The COD concentration in the municipal wastewater decreased by 90% upon treatment with bio-char. The decrease in the COD was attributed to the enhanced removal of bio contaminants as they were passed through the biochar due to the biochar’s adsorption properties as well as the high surface area of the bio char. An 89% reduction in the TSS was observed as the bio filtration process with bio char increased from one day to five days

The TKN concentration in the wastewater decreased by 64% upon treatment with bio char as a bio filter. The TP in the wastewater decreased by 78% as the bio filtration time with biochar increase. The wastewater pH changed from being alkaline to neutral during the treatment with biochar over the 5 day period

6. Use of Biochar in Textiles

In Japan and China bamboo-based biochar are already being woven into textiles to gain better thermal and breathing properties and to reduce the development of odours through sweat. The same aim is pursued through the inclusion of biochar in shoe soles and socks.