Advantages of Biomethane

The key advantage of biomethane is that it is less corrosive than biogas which makes it more flexible in its application than raw biogas. It can be injected directly into the existing natural gas grid leading to energy-efficient and cost-effective transport, besides allowing natural gas grid operators to persuade consumers to make a smooth transition to a renewable source of natural gas.

Biogas can be upgraded to biomethane and injected into the natural gas grid to substitute natural gas or can be compressed and fuelled via a pumping station at the place of production. Biomethane can be injected and distributed through the natural gas grid, after it has been compressed to the pipeline pressure.

The injected biomethane can be used at any ratio with natural gas as vehicle fuel. In many EU countries, the access to the gas grid is guaranteed for all biogas suppliers.

A major advantage of using natural gas grid for biomethane distribution is that the grid connects the production site of biomethane, which is usually in rural areas, with more densely populated areas. This enables biogas to reach new customers.

Storage of Biomethane

Biomethane can be converted either into liquefied biomethane (LBM) or compressed biomethane (CBM) in order to facilitate its long-term storage and transportation. LBM can be transported relatively easily and can be dispensed through LNG vehicles or CNG vehicles. Liquid biomethane is transported in the same manner as LNG, that is, via insulated tanker trucks designed for transportation of cryogenic liquids.

Biomethane can be stored as CBM to save space. The gas is stored in steel cylinders such as those typically used for storage of other commercial gases.

Applications of Biomethane

Biomethane can be used to generate electricity and heating from within smaller decentralized, or large centrally-located combined heat and power plants. It can be used by heating systems with a highly efficient fuel value, and employed as a regenerative power source in gas-powered vehicles.

Biomethane, as a transportation fuel, is most suitable for vehicles having engines that are based on natural gas (CNG or LNG). Once biogas is cleaned and upgraded to biomethane, it is virtually the same as natural gas.

Because biomethane has a lower energy density than NG, due to the high CO₂ content, in some circumstances, changes to natural gas-based vehicle’s fuel injection system are required to use the biomethane effectively.

The post Biomethane – The Green Gas first appeared on BioEnergy Consult.

Growth of the Plastic Recycling Market

Valued at around $43.73 billion in 2018, research indicates that the plastic recycling market will grow at a compound annual growth rate (CAGR) of 6.6% in revenue and 8.8% in volume by 2027. Findings are that rising environmental concerns will be the primary driving force along with the concerted global effort towards effective waste management and sustainability. Another is the growing awareness of the need for recycling plastic and the anticipated market growth of the PR market.

A new report released by Research and Markets in February 2020 gives a market snapshot in its executive summary and discusses the plastic recycling market by material type, source, application, and geography. Titled Global Plastic Recycling Market Size, Market Share, Application Analysis, Regional Outlook, Growth Trends, Key Players, Competitive Strategies and Forecasts, 2019 to 2027, it explores the roles of the many global and regional participants in the plastic recycling market and analyses anticipated acquisitions, partnerships, and collaborations. These, the report states, are likely to be the major strategies market players will follow in an endeavor to expand their geographic presence and market share.

An older report published mid-2018 gave a slightly lower CAGR for the period 2018 to 2023 of 4.3%. This report, Global Plastic Waste Management Market 2018 by Manufacturers, Regions, Type and Application, Forecast to 2023 stated that it would grow from an estimated $27,1000 in 2017 to $34,900 in 2023.

Global Focus

When research for the new report was carried out during 2018, the Asia-Pacific region including China, Indonesia, Malaysia, and India, had the highest market share in plastic recycling. This was attributed to the fact that the region has the largest share in the generation of plastic waste and is also the biggest plastic waste importer.

However, Europe was pinpointed as a region poised to become the fastest-growing in the plastic recycling market due to increasing government initiatives and the improvement of recycling facilities in this part of the world.

While the report covers at least 16 companies involved in plastic recycling globally, the Hungarian MOL Group has been highlighted as a result of its acquisition of Aurora, a German recycled plastic compounder company. MOL is a well-established supplier of virgin polymers and was motivated by its Enter Tomorrow 2030 strategy that aims to move its business from a traditional fuel-based model to a higher value-added petrochemical product portfolio. More specifically, MOL intends to strengthen its position as a supplier in the sustainable plastic compounding segment of the automotive industry.

The older report focused on plastic waste management not only in the Asia-Pacific region but also in North and South America, Europe, the Middle East, and Africa.

Use of Recycled Plastic

In terms of plastic materials, high-density polyethylene (HDPE) and polyethylene terephthalate (PET) had the biggest market share in 2018. The reason given for this was a rapid surge in demand for PET and HDPE for the manufacturing of packaging. Hopefully, this won’t increase the production of PET and HDPE, but will rather help to get rid of waste.

As the CEO of Unilever, Alan Jope, said in a press statement late 2019: “Plastic has its place, but that place is not in the environment.” He was announcing Unilever’s commitment to halve its use of virgin plastic, reduce its use of plastic packaging, and dramatically step up its use of recycled plastic by 2025. They would also help to collect and process more plastic packaging than it sells – which will amount to about 600,000 tonnes per year, he said.

Additionally, technological advances in the plastic recycling industry have led to other less expected uses including the manufacture of denim clothing.

Realizing the environmental impact production of denim clothing has, Levi Strauss & Co. has taken bold steps to reduce its use of water and chemicals in cotton and cotton-clothing production, and about a decade ago, the company launched its much more sustainable Water<Less range of jeans. In 2013, Levi’s used dumped plastic bottles and food trays to make 300,000 jeans and trucker jackets for its spring collection. Of course, not the entire product was made from plastic, but it was guaranteed that at least 20% came from recycled plastic content.

Many other items are also made from recycled plastic, some with more plastic content than others. They include bags, rugs and mats, blankets, bottles, planters, dog collars, shoes, decking, fencing, and outdoor furniture.

The Future of Plastic

While many people talk about plastic as a material that should be eradicated, it does have remarkable uses as Alan Jope implies. But there is a dire need to change our thinking. The irony is that when recycled plastic was invented it was used to try and solve environmental problems like reducing the hunting of elephants for ivory and to provide protective sheaths for electrical wiring.

There is undoubtedly too much virgin plastic being produced worldwide and during the process, there are too many other natural resources being depleted. Added to this, too many consumers have no knowledge or concern about the use and disposal of plastic products. They simply don’t care!

We, as a global nation, need to focus more on the reuse, recycling, and remanufacture of plastic, which is exactly what plastic recycling companies can do so successfully.

Ultimately, we need to eradicate plastic waste by making it useful, and there is no doubt that the mechanical engineering sector is well positioned to find solutions.

Recommended Reading: How to Recycle Plastics

The post Plastic Waste Reduction Leads to Growth in Plastic Recycling Market first appeared on BioEnergy Consult.

Developed in the 1970s, developers have incorporated the PassivHaus design in homes all over the world and in a variety of climates. As an affordable, eco-friendly and versatile construction solution, these homes will play an essential role in the future of homebuilding.

Affordable

Professionals often regard eco-friendly building solutions as too expensive. While construction costs for passive homes can cost 5 to 10% more upfront than a traditional build, these fees are negligible compared to future savings. As sustainable options become standard, these costs may drop. Passive Homes rely on design principles that promote peak energy efficiency without external systems.

With a focus on proper insulation and minimizing air leakage, homeowners can save on conventional heating costs without needing to invest in expensive forms of renewable energy. While solar panels or other types of eco-friendly power are popular, because of the efficiency of the Passive House, their usage is minimal.

Adaptable

People build Passive Houses all over the globe in a variety of climates. The five main principles of passive homebuilding are versatile and can be altered depending on the environment. The airtight construction utilizes proper heat balance, ensuring that warm air remains inside in cooler climates, and properly ventilates in warmer ones.

Another nice feature of Passive Home construction is the ability to modify each project aesthetically. Unlike other forms of sustainable building, such as straw bale homes or shipping containers, professionals can construct Passive Homes using a variety of eco-friendly building materials. This style does not limit builders to certain architectural styles. Because supplies can vary, many homeowners choose to add to the overall sustainability of their homes by using post-consumer building materials.

Eco-Friendly

Passive Homes are eco-friendly by design. In Europe, it’s the standard building practice of the future. According to The Resolution of the European Parliament, its implementation will be mandatory in new home construction by all member states in 2021.

The elements of Passive Homes are sustainable by default and do not require relying on alternative energy systems for primary energy. The standard principles are the result of research at the Passive House Institute, and include:

• Airtight structures
• Double and triple-insulated windows
• Continuous insulation
• Thermal sealing
• Air quality management

Passive Home design principles do not rely on renewables as a primary source of energy, focusing instead on insulation and passive solar to maximize heat efficiency. They’re also the most affordable way to achieve zero-carbon, resulting in energy savings of up to 90% compared to conventional energy systems.

Passive Building for the Future

Passive Home design incorporates efficient ventilation, heat recovery and super insulation to create a high-quality structure that is not only efficient but also extremely comfortable. A contractor can adapt these buildings to any climate or design preference. While Passive Homes are already a standard — and future mandated — construction in Europe, they’re also becoming more popular in the United States.

Thanks to a U.S. Department of Energy “Building America” Grant, the PassivHaus Institute established new building standards that take into account market and climate variables throughout North America, including comfort and performance.

Any architect or contractor can easily utilize the Passive Home style, and the building standards are available via online distribution. As consumers and developers look towards a more sustainable and eco-friendly future, this style of building should be at the forefront of construction.

The post Why Passive Homes Will Be the Future of Home Building first appeared on BioEnergy Consult.

Size of the Industry

Around 130 million tonnes of municipal solid waste (MSW) are combusted annually in over 600 waste-to-energy (WTE) facilities globally that produce electricity and steam for district heating and recovered metals for recycling. The global market for biological and thermochemical waste-to-energy technologies is expected to grow to USD 29.2 billion by 2022. Incineration, with energy recovery, is the most common waste-to-energy method employed worldwide.

Since 1995, the global WTE industry increased by more than 16 million tonnes of MSW. Over the last five years, waste incineration in Europe has generated between an average of 4% to 8% of their countries’ electricity and between an average of 10% to 15% of the continent’s domestic heat.

Advanced thermal technologies, like gasification and pyrolysis, and anaerobic digestion systems are beginning to make deep inroads in the waste-to-energy sector and are expected to increase their respective market shares on account of global interest in integrated waste management framework in urban areas. Scarcity of waste disposal sites coupled with growing waste volumes and solid waste management challenges are generating high degree of interest in energy-from-waste systems among policy-makers, urban planners, entrepreneurs, utility companies etc.

Regional Trends

Currently, the European nations are recognized as global leaders of waste-to-energy movement. They are followed behind by the Asia Pacific region and North America respectively. In 2007 there are more than 600 WTE plants in 35 different countries, including large countries such as China and small ones such as Bermuda. Some of the newest plants are located in Asia. China is witnessing a surge in waste-to-energy installations and has plans to establish 125 new waste-to-energy plants during the twelfth five-year plan ending 2015.

The United States processes 14 percent of its trash in WTE plants. Denmark, on the other hand, processes more than any other country – 54 percent of its waste materials. As at the end of 2008, Europe had more than 475 WTE plants across its regions – more than any other continent in the world – that processes an average of 59 million tonnes of waste per annum. In the same year, the European WTE industry as a whole had generated revenues of approximately US$4.5bn.

Legislative shifts by European governments have seen considerable progress made in the region’s WTE industry as well as in the implementation of advanced technology and innovative recycling solutions. The most important piece of WTE legislation pertaining to the region has been the European Union’s Landfill Directive, which was officially implemented in 2001 which has resulted in the planning and commissioning of an increasing number of WTE plants over the past five years.

The post Trends in Waste-to-Energy Industry first appeared on BioEnergy Consult.

Consumer Behavior – A Top Priority

Consumer behaviour is a huge priority area in particular for industrialised nations – it is estimated that some western societies might be throwing away up to a third of all food purchased. The rise of cheap food and convenience culture in recent years has compounded this problem, with few incentives or disincentives in place at producer, retail or consumer level to address this.

While it is likely that a number of structural levers – such as price, regulation, enabling measures and public benefits – will need to be pulled together in a coherent way to drive progress on this agenda, at a deeper level there is a pressing argument to explore the psycho-social perspectives of behaviour change.

Individual or collective behaviours often exist within a broader cultural context of values and attitudes that are hard to measure and influence. Simple one-off actions such as freezing leftovers or buying less during a weekly food shop do not necessarily translate into daily behaviour patterns. For such motivations to have staying power, they must become instinctive acts, aligned with an immediate sense of purpose. Click here to see what steps you can take to tackle this issue. The need to consider more broadly our behaviours and how they are implicated in such issues must not stop at individual consumers, but extend to governments, businesses and NGOs if effective strategies are to be drawn up.

Emergence of Food Waste Disposers

Food waste disposer (FWDs), devices invented and adopted as a tool of food waste management may now represent a unique new front in the fight against climate change. These devices, commonplace in North America, Australia and New Zealand work by shredding household or commercial food waste into small pieces that pass through a municipal sewer system without difficulty.

The shredded food particles are then conveyed by existing wastewater infrastructure to wastewater treatment plants where they can contribute to the generation of biogas via anaerobic digestion. This displaces the need for generation of the same amount of biogas using traditional fossil fuels, thereby averting a net addition of greenhouse gases (GHG) to the atmosphere.

The use of anaerobic digesters is more common in the treatment of sewage sludge, as implemented in the U.K., but not as much in the treatment of food waste. In addition to this, food waste can also replace methanol (produced from fossil fuels) and citric acid used in advanced wastewater treatment processes which are generally carbon limited.

Despite an ample number of studies pointing to the evidence of positive impacts of food waste disposer, concerns regarding its use still exist, notably in Europe. Scotland for example has passed legislation that bans use of FWDs, stating instead that customers must segregate their waste and make it available curbside for pickup. This makes it especially difficult for the hospitality industry, to which the use of disposer is well suited.

The U.S. however has seen larger scale adoption of the technology due to the big sales push it received in the 1950s and 60s. In addition to being just kitchen convenience appliances, FWDs are yet to be widely accepted as a tool for positive environmental impact.

Note: Note: This excerpt is being published with the permission of our collaborative partner Be Waste Wise.

The post Role of Food Waste Disposers in Food Waste Management first appeared on BioEnergy Consult.

According to EPA, about 63.1 million tons of food waste was thrown away into landfills or incinerators the United States in 2018. As far as United Kingdom is concerned, households threw away 6.6 million tons of food each year. These statistics are an indication of tremendous amount of food waste generated all over the world.

The proportion of food residuals in municipal waste stream is gradually increasing and hence a proper food waste management strategy needs to be devised to ensure its eco-friendly and sustainable disposal. Currently, only about 3 percent of food waste is recycled throughout U.S., mainly through composting. Composting provides an alternative to landfill disposal of food waste, however it requires large areas of land, produces volatile organic compounds and consumes energy. Consequently, there is an urgent need to explore better recycling alternatives.

Anaerobic digestion has been successfully used in several European and Asian countries to stabilize food wastes, and to provide beneficial end-products. Sweden, Austria, Denmark, Germany and England have led the way in developing new advanced biogas technologies and setting up new projects for conversion of food waste into energy.

Anaerobic Digestion of Food Waste

Anaerobic digestion is the most important method for the treatment of organic waste, such as food residuals, because of its techno-economic viability and environmental sustainability. Anaerobic digestion generates renewable energy from food waste  in the form of biogas and preserves the nutrients which are recycled back to the agricultural land in the form of slurry or solid fertilizer.

The relevance of biogas technology lies in the fact that it makes the best possible use of various organic wastes as a renewable source of clean energy. A biogas plant is a decentralized energy system, which can lead to self-sufficiency in heat and power needs, and at the same time reduces environmental pollution. Thus, anaerobic digestion of food waste can lead to climate change mitigation, economic benefits and landfill diversion opportunities.

Of the different types of organic wastes available, food waste holds the highest potential in terms of economic exploitation as it contains high amount of carbon and can be efficiently converted into biogas and organic fertilizer. Food waste can either be used as a single substrate in a biogas plant, or can be co-digested with organic wastes like cow manure, poultry litter, sewage, crop residues, slaughterhouse wastes, etc.

Renewable Energy from Food Residuals

The feedstock for the food waste-to-energy plant includes leftover food, vegetable refuse, stale cooked and uncooked food, meat, tea bags, napkins, extracted tea powder, milk products, etc. Raw waste is shredded to reduce to its particle size to less than 12 mm. The primary aim of shredding is to produce a uniform feed and reduce plant “down-time” due to pipe blockages by large food particles. It also improves mechanical action and digestibility and enables easy removal of any plastic bags or cling-film from waste.

Fresh waste and re-circulated digestate (or digested food waste) are mixed in a mixing tank. The digestate is added to adjust the solids content of the incoming waste stream from 20 to 25 percent (in the incoming waste) to the desired solids content of the waste stream entering the digestion system (10 to 12 percent total solids). The homogenized waste stream is pumped into the feeding tank, from which the anaerobic digestion system is continuously fed. Feeding tank also acts as a pre-digester and subjected to heat at 55º to 60º C to eliminate pathogens and to facilitate the growth of thermophilic microbes for faster degradation of waste.

From the predigestor tank, the slurry enters the main digester where it undergoes anaerobic degradation by a consortium of Archaebacteria belonging to Methanococcus group. The anaerobic digester is a CSTR reactor having average retention time of 15 to 20 days. The digester is operated in the mesophilic temperature range (33º to 38°C), with heating carried out within the digester. Food waste is highly biodegradable and has much higher volatile solids destruction rate (86 to 90 percent) than biosolids or livestock manure. As per conservative estimates, each ton of food waste produces 150 to 200 m³ of biogas, depending on reactor design, process conditions, waste composition, etc.

Biogas contains significant amount of hydrogen sulfide (H₂S) gas that needs to be stripped off due to its corrosive nature. The removal of H₂S takes place in a biological desulphurization unit in which a limited quantity of air is added to biogas in the presence of specialized aerobic bacteria that oxidizes H₂S into elemental sulfur. The biogas produced as a result of anaerobic digestion of waste is sent to a gas holder for temporary storage. Biogas is eventually used in a combined heat and power (CHP) unit for its conversion into thermal and electrical energy in a co­generation power station of suitable capacity. The exhaust gases from the CHP unit are used for meeting process heat requirements.

The digested substrate leaving the reactor is rich in nutrients like nitrogen, potassium and phosphorus which are beneficial for plants as well as soil. The digested slurry is dewatered in a series of screw presses to remove the moisture from slurry. Solar drying and additives are used to enhance the market value and handling characteristics of the fertilizer.

Diverting Food from Landfills

Food residuals are one of the single largest constituents of municipal solid waste stream. Diversion of food waste from landfills can provide significant contribution towards climate change mitigation, apart from generating revenues and creating employment opportunities. Rising energy prices and increasing environmental pollution makes it more important to harness renewable energy from food scraps and create a sustainable food supply chain.

Anaerobic digestion technology is widely available worldwide and successful projects are already in place in several European as well as Asian countries that makes it imperative on waste generators and environmental agencies to root for a sustainable food waste management system.

The post Renewable Energy from Food Residuals first appeared on BioEnergy Consult.

Biomethane production in Europe has swiftly increased from 752 GWh in 2011 to 17,264 GWh in 2016 with Germany being the market leader with 195 biomethane production plants, followed by United Kingdom with 92 facilities. Biogas generation across Europe also witnessed a rapid growth of 59% during the year 2011 and 2016. In terms of plant capacities, the regional trend is to establish large-scale biomethane plants.

Sources of Biomethane in Europe

Landfill gas and AD plants (based on energy crops, agricultural residues, food waste, industrial waste and sewage sludge) are the major resources for biomethane production in Europe, with the predominant source being agricultural crops (such as maize) and dedicated energy crops (like miscanthus). In countries, like Germany, Austria and Denmark, energy crops, agricultural by-products, sewage sludge and animal manure are the major feedstock for biomethane production. On the other hand, France, UK, Spain and Italy rely more on landfill gas to generate biomethane.

A large number of biogas plants in Europe are located in agricultural areas having abundant availability of organic wastes, such as grass silage and green waste, which are cheaper than crops. Maize is the most cost-effective raw material for biomethane production. In many parts of Europe, the practice of co-digestion is practised whereby energy crops are used in combination with animal manure as a substrate. After agricultural biogas plants, sewage sludge is one of the most popular substrates for biomethane production in Europe.

Biomethane Utilization Trends in Europe

Biomethane has a wide range of applications in the clean energy sector. In Europe, the main uses of biomethane include the following:

1. Production of heat and/or steam
2. Power generation and combined heat and power production(CHP)
3. Replacement for natural gas (gas grid injection)
4. Replacement for compressed natural gas & diesel – (bio-CNG for use as transport fuel)
5. Replacement for liquid natural gas – (bio-LNG for use as transport fuel)

Prior to practically all utilization options, the biogas has to be dried (usually through application of a cooling/condensation step). Furthermore, elements such as hydrogen sulphide and other harmful trace elements must be removed (usually trough application of an activated carbon filter) to prevent adverse effects on downstream processing equipment (such as compressors, piping, boilers and CHP systems).

Biomethane is getting popularity as a clean vehicle fuel in Europe. For example, Germany has more than 900 CNG filling stations, with a fleet of around 100,000 gas-powered vehicles including cars, buses and trucks. Around 170 CNG filling stations in Germany sell a blend mixture of natural gas and biomethane while about 125 filling stations sell 100% biomethane from AD plants.

Barriers to Overcome

The fact that energy crops can put extra pressure on land availability for cultivation of food crops has led many European countries to initiate measures to reduce or restrict biogas production from energy crops. As far as waste-derived biomethane is concerned, most of the EU nations are phasing out landfill-based waste management systems which may lead to rapid decline in landfill gas production thus putting the onus of biomethane production largely on anaerobic digestion of food waste, sewage sludge, industrial waste and agricultural residues.

The high costs of biogas upgradation and natural gas grid connection is a major hurdle in the development of biomethane sector in Eastern European nations. The injection of biomethane is also limited by location of suitable biomethane production facilities, which should ideally be located close to the natural gas grid.  Several European nations have introduced industry standards for injecting biogas into the natural gas grid but these standards differ considerably with each other.

Another important issue is the insufficient number of biomethane filling stations and biomethane-powered vehicles in Europe. A large section of the population is still not aware about the benefits of biomethane as a vehicle fuel. Strong political backing and infrastructural support will provide greater thrust to biomethane industry in Europe.

The post Biomethane Industry in Europe first appeared on BioEnergy Consult.

PVC Recycling Methods

Currently, PVC plastic is being recycled by either of the two ways:

• Mechanical recycling – This involves mechanically treating the waste (e.g. grinding) to reduce it into smaller particles.  The resulting granules, called recyclate, can be melted and remolded into different products, usually the same product from which it came.
• Feedstock recycling – Chemical processes such as pyrolysis, hydrolysis and heating are used to convert the waste into its chemical components.  The resulting products – sodium chloride, calcium chloride, hydrocarbon products and heavy metals to name a few – are used to produce new PVC, as feed for other manufacturing processes or as fuel for energy recovery.

In mechanical recycling, because no chemical reaction is involved, the recyclate retains its original composition. This poses a recycling challenge because PVC products, depending on their application, contain different additives.  For example, rigid PVC is unplasticized whereas flexible PVC is added plasticizers because this additive increases the plastic’s fluidity and thus, its flexibility. Even products used for the same application may still differ in composition if they have different manufacturers.

When different kinds of PVC waste are fed to a mechanical recycler, the resulting product’s composition is difficult to predict, which is problematic because most PVC products, even recycled ones, require a specific PVC content.  In order to produce a high-quality recylate, the feed ideally should not be mixed with other kinds of plastic and should have a uniform material composition.Material recycling is therefore more applicable for post-industrial waste than for post-consumer waste.

Feedstock recycling is seen to be complementary to conventional mechanical recycling as it is able to treat mixed or unsorted PVC waste and recover valuable materials.  However, a study showed that feedstock recycling (or at least the two that was considered) incurred higher costs than landfilling, primarily due to the low value of the recovered products. This provides little incentive for recyclers to pursue PVC recycling.  This may change in the future as more stringent regulations to protect the environment are enacted.  Some countries in Europe have already banned PVCs from landfills and PlasticsEurope is targeting a “zero plastic to landfill” in Europe by 2020.

Post-industrial waste is relatively pure and comes from PVC production and installation, such as cut-offs from laying of cables or scraps from the installation of window frames.  These are easily recycled since they can be collected directly from processors or installers or even recycled by producers themselves as raw material to manufacture the same product.

Post-consumer waste contains mixed material and has been used for different applications.  These are products that have reached the end-of-life or are replaced due to damage, like pipes from underground, window frames being replaced for renovation and electric cables recovered from demolition. These would require further sorting and cleaning, adding cost to the recycling process.  The recyclate produced is usually of lower quality and consequently of decreased economic value.

Recent Developments

Europe is leading the way for a more sustainable use of PVC with programs, such as RecoVinyl and VinylPlus, where recycling is advanced as one of the ways to use resources more efficiently and to divert as much waste as possible from landfills. Recovinyl, created in 2003, is an initiative of the European PVC industry to advance the sustainable development of the PVC industry by improving production processes, minimise emissions, develop recycling technology and boost the collection and recycling of waste.

Having been successful in all of its goals, including an increase in recycling of PVC across Europe to over 240,000 tonnes a year, in 2011 the PVC industry redefined the role of Recovinyl as part of the ambitious new ten-year VinylPlus sustainable development programme. VinylPlus works in partnership with consumers, businesses, municipalities, waste management companies, recyclers and converter, as well as the European Commission and national and local governments. The goal is to certify those companies who recycle PVC waste and those accredited converting companies who purchase recyclate to manufacture new products and applications.

Even if some types of PVC recycling are not feasible or economically viable at present, it will likely be reversed in the future as governments, manufacturers, consumers and other stakeholders create programs that innovate and find ways to achieve a sustainable future for the PVC industry.

The post Everything You Need to Know About PVC Recycling first appeared on BioEnergy Consult.

Besides, it reduces the harmful emissions substantially. It is less corrosive and can be blended in any concentration with petrol (gasoline). Several research studies suggest that butanol can be blended into either petrol or diesel to as much as 45 percent without engine modifications or severe performance degradation.

Production of Biobutanol

Biobutanol is produced by microbial fermentation, similar to bioethanol, and can be made from the same range of sugar, starch or cellulosic feedstocks. The most commonly used microorganisms are strains of Clostridium acetobutylicum and Clostridium beijerinckii. In addition to butanol, these organisms also produce acetone and ethanol, so the process is often referred to as the “ABE fermentation”.

The main concern with Clostridium acetobutylicum is that it easily gets poisoned at concentrations above 2% of biobutanol in the fermenting mixture. This hinders the production of biobutanol in economically viable quantities.

In recent years, there has been renewed interest in biobutanol due to increasing petroleum prices and search for clean energy resources. Researchers have made significant advances in designing new microorganisms capable of surviving in high butanol concentrations. The new genetically modified micro-organisms have the capacity to degrade even the cellulosic feedstocks.

Latest Trends

Biobutanol production is currently more expensive than bioethanol which has hampered its commercialization. However, biobutanol has several advantages over ethanol and is currently the focus of extensive research and development. There is now increasing interest in use of biobutanol as a transport fuel. As a fuel, it can be transported in existing infrastructure and does not require flex-fuel vehicle pipes and hoses.

Fleet testing of biobutanol has begun in the United States and the European Union. A number of companies are now investigating novel alternatives to traditional ABE fermentation, which would enable biobutanol to be produced on an industrial scale.

The post Biobutanol as a Biofuel first appeared on BioEnergy Consult.

The solar PV systems, which are either placed in ground-mounted solar farms or on rooftops are considered cheaper than CSP and constitutes the majority of solar installations, while CSP and large-scale PV accounts for the majority of the general solar electricity-generation-capacity, across the globe.

Global Trends in Solar Energy

In 2017, solar photovoltaic capacity increased by 95 GW, with a 34% growth year-on-year of new installations. Cumulative installed capacity exceeded 401 GW by the end of the year, sufficient to supply 2.1 percent of the world’s total electricity consumption. This growth was dramatic, and scientists viewed it as a crucial way to meet the world’s commitments to climate change.

“In most countries around the world there is still huge potential to dramatically increase the amount of energy we’re able to get from solar. The only way to achieve this is through a combination of both governance and individual responsibility.” Alastair Kay, Editor at Green Business Watch

Both CSP and PV systems are an essential part of energy and infrastructure portfolio and experts claim that by 2050, solar power will become the greatest source of electricity in the whole world. To achieve this goal, the capacity of PV systems should grow up to 4600 gigawatts, of which 50% or more would come from India or China. To date, the capacity of solar power is about 310 gigawatts, a drastic increase on the 50 gigawatts of power installed in 2010.

The United Kingdom, followed by Germany and France led Europe in the 2016 general statistics for solar power growth with new solar installations of 29%, 21%, and 8.3% respectively. In early 2016, the amount of power across Europe was near 100 gigawatts but now stands at 105 gigawatts. This growth is regarded as slow and experts in the solar industry are calling upon the European Union to give more targets concerning the renewable source of energy. It is said that setting a target that is not less than 35% will revive the solar business in Europe.

Across the United States in places, such as Phoenix and Los Angeles, which are located in a sunny region, a common PV system can generate an average of 7500 kWh – similar to the electrical power in use in a typical US home.

In Africa, many nations especially those around the deserts such as Sahara receive a great deal of sunlight every day, creating an opportunity for the development of solar technology across the region. Distribution of PV systems is almost uniform in Africa with the majority of countries receiving about 2000 kWh/m2 in every year. A certain study shows that generating solar power in a facility covering about 0.3% of the area consisting of North Africa could provide all the energy needed by the European-Union.

Asia alone contributed to 66.66% of the global amount of solar power installed in 2016, with about 50% coming from China.

With these reports, it is clear that the development of solar energy technology is growing in each and every continent with just a few countries with little or no apparent growth.

The growth of solar power technology across every continent in the world is very fast and steady and in the near future, almost every country will have a history to tell about the numerous benefits of going solar. The adoption of solar power will help improve the development of other sectors of the economy, such as the electronics industry, hence creating a lot of employment opportunities.

The post Global Trends in Solar Energy Sector first appeared on BioEnergy Consult.