A 30,000-grain water softener by Morton is the System Saver M30. It removes calcium and other hardness minerals from hard water by ion exchange. More efficient use of soaps and detergents owing to greater lathering, brighter laundry, and clean and spot-free dishes are all possible outcomes. In addition, the plumbing system and appliances in your home will be safeguarded against scaling.
How many hardness granules may be treated per gallon? Water that is up to 95 gpg is extremely hard.
Morton water softeners, by the way, are built in the United States and may be used with both city and well water.
According to WQA test results, the M30 can even remove up to 7 parts per million of clear-water iron, which many homes on a private well struggle with. No, ferric, iron bacteria, or organic iron compounds are not affected.
The given flow rate of 7 gpm is enough for families with up to three occupants.
The minimum operating pressure for this device is 20 psi. 125 psi is the maximum pressure.
If you’re unsure about which salt to use, Morton advises System Saver II Pellets (of course). However, any high-grade softening salt in pellet form should suffice.
Because it can treat water with up to 95 grains of hardness, the Morton System Saver M30 softener is one of the higher performing salt-based water softeners on the market. As a result, the System Saver M30 may be used with water of virtually any hardness, even private well water.
During regeneration, all salt-based water softeners waste water, but this best Morton softening feature employs sophisticated technology to minimize this waste as much as possible. It evaluates your household’s average water consumption and forecasts how often the system will need to renew, saving water waste and salt replenishment.
The System Saver employs ion exchange to soften water as a salt-based softener. Ion exchange is a typical method for softening water that often delivers the greatest results. The system may also remove up to 7ppm of iron, preventing rust from forming. The system is designed to create soft water for four-person households and has a grain capacity of 30,000 grains.
Installation and Maintenance
The Morton M30 might be difficult to install. Many individuals prefer to hire a professional plumber instead of doing it themselves. Although the device comes with an installation instructions, if you don’t have much plumbing knowledge, you may find it difficult to set up the system on your own.
Outside installation is possible, but only if you live in an area where the temperature does not dip below freezing. With a height of 43 inches and a width of 17 inches, it’ll help you save room or fit neatly into a smaller space.
The System Saver’s maintenance consists of filling up the salt and cleaning up the tanks on a regular basis. Because the Morton system is dependent on salt to function, you’ll need to keep a check on the salt levels and replenish them as needed. You’ll also need to wipe out the interior of the tank and remove any sediment or slime, as directed in the user handbook.
The Morton System Saver softens water with a single tank and ion exchange. Sodium (or salt) ions exchange places with hardness ions, resulting in calcium and magnesium ions when they flow through the tank’s resin. While the soft water exits the tank and travels through your home’s plumbing, the calcium and magnesium remain trapped in the resin.
With this Morton softener, you should be able to enjoy a variety of soft water perks. Because your soft water lathers better, you’ll be able to reduce your use of soaps and detergents. You won’t have to clean as often since your water won’t create limescale deposits, and your appliances will last longer. You should have whiter, fresher laundry as well.
The system also eliminates iron, and if your water is unusually rich in iron, the creators recommend using Morton® Rust Remover salt. Although there is some debate over whether a salt-based softener with a filter can genuinely remove iron, many customers have commended the Morton M30 for its rust-removal skills. If your water contains a lot of iron, you should probably invest in a separate iron filter.
Leaks were a problem for certain consumers. Morton customer service received diverse reviews, ranging from terrible to excellent.
Another disadvantage is the exorbitant cost of replacing parts, such as the control board. Finally, the installation instructions should be improved.
The Morton System Saver M30 softens water in the proper manner. It can even manage modest iron levels and is simple to set up. However, it appears that overall quality and customer service are a problem. Nonetheless, we believe it is a reasonably excellent water softener on the market.