Agricultural residues, which are generated in the field at the time of harvest, are defined as primary or field based residues whereas those co-produced during processing are called secondary or processing based residues.

• Primary agricultural residues – paddy straw, sugarcane top, maize stalks, coconut empty bunches and frond, palm oil frond and bunches;
• Secondary agricultural residues – paddy husk, bagasse, maize cob, coconut shell, coconut husk, coir dust, saw dust, palm oil shell, fiber and empty bunches, wastewater, black liquor.

Agricultural residues are highly important sources of biomass fuels for both the domestic and industrial sectors. Availability of primary residues for energy application is usually low since collection is difficult and they have other uses as fertilizer, animal feed etc.

However secondary residues are usually available in relatively large quantities at the processing site and may be used as captive energy source for the same processing plant involving minimal transportation and handling cost.

Crop residues encompasses all agricultural wastes such as straw, stem, stalk, leaves, husk, shell, peel, pulp, stubble, etc. which come from cereals (rice, wheat, maize or corn, sorghum, barley, millet), cotton, groundnut, jute, legumes (tomato, bean, soy) coffee, cacao, tea, fruits (banana, mango, coco, cashew) and palm oil.

Rice produces both straw and rice husks at the processing plant which can be conveniently and easily converted into energy. Significant quantities of biomass remain in the fields in the form of cob when maize is harvested which can be converted into energy.

Sugarcane harvesting leads to harvest residues in the fields while processing produces fibrous bagasse, both of which are good sources of energy. Harvesting and processing of coconuts produces quantities of shell and fibre that can be utilised while peanuts leave shells. All these materials can be converted into useful energy by a wide range of biomass conversion technologies.

The post Everything You Should Know About Agricultural Residues first appeared on BioEnergy Consult.

What is Green Steel

Green steel refers to the process of steel manufacturing with reduced GHG emissions into the atmosphere as well as potentially reducing cost and improving steel quality, as compared to conventional steel production. A study indicates that steel demand will keep on rising until the end of the 21st century, so there is a huge motivation to look for an alternative method of steel production that emits low greenhouse gas (GHG) emissions into the atmosphere.

Scrap steel recycling is a positive step toward alleviating emissions. However, based on the available scrap, this route can contribute 44% of the total steel production by the end of 2050, which is not sufficient to meet the growing demands.

Also, the issue with recycled steel is that they are contaminated with copper and tin, which causes surface cracking during the hot rolling process. An integrated steel recycling process with innovative routes can bring down the global warming to a manageable threat.

Blast furnace (BF) and basic oxygen furnace (BOF) contribute to 70% of total GHG emissions into the environment. The process reduces iron into ores, sinter and pellets using carbon-based lowering agents. Fluxes (or steel scrap) are added to the blast furnace to maintain the slag temperature and separate the impurities. The hot metal produced contains sulphur, phosphorous, manganese and silicon. The impurities are heated/reduced in BOF to produce high-quality steel with carbon below 2%. High Calcium and dolomite lime are utilized in multiple stages of this procedure and result in various improvements and advantages.

According to research, hydrogen-based and electricity-based steel production have minimal emissions into the atmosphere. However, this technology is still under investigation, some small-scale development has been done in the past, but large scale development is still under development phase.

Pathways for Green Steel Production – Opportunities and Challenges

Various alternative ways exist to produce low-grade carbon products such as carbon capture and storage (CCS), renewable hydrogen and high utilisation of biomass resources. The use of artificial iron units (AIUs) in iron steel production can reduce significant carbon emissions and high-grade steel production.

To minimize emissions, scrap use must be incorporated into the manufacturing process. The use of bioenergy resources in steel production can be a good option, but that goes through a long list of concerns, such as biomass availability, the capital cost of replacement of existing technology.

An Integrated Iron and Steel Mill (ISM) consists of many complex series of interconnected plants, where emissions come out from many sources (10 or more). Huge amount of CO₂ is produced by the reduction reaction reactions occurring in the blast furnace and the combustion reaction in sintering, blast furnace and basic oxygen furnace.

Biomass can be used for steel production in place of coal, but this is discouraged by most industries, mainly because of huge biomass requirement, transportation, and storage requirement. Another alternative is the use of natural gas, which at present accounts for 20% of overall steel production in the world. Natural gas produces GHG emissions, which is feasible for small scale goals. If the end target is to achieve significant scale goals, then natural gas use integrated with carbon capture technology is beneficial.

The absorption process is another method used to separate CO₂ from gas streams using chemical solvents. However, this process is very expensive because of the high thermal energy required to break the strong bond between solvents and CO₂.

Adsorption is also a process to reduce CO₂ where a gas stream is passed through the solid adsorbent (such as zeolites, activated carbon). The bed loaded with reduced pressure, increased temperature, and low voltage electric current is challenging to maintain to also expensive.

Gas separation is also a method to reduce GHG emissions, which works on the development of gas separation membranes (polymers, ceramics, zeolites and metals), depending on the difference in physical and chemical interactions. The reducing efficiency reaches up to 80% CO₂ separation. In 2007, a simulation study revealed 97% of CO₂ recovery from blast furnace gas. Ongoing research in Australia where researchers are developing new technology for gas separation membrane. The research aims to test a number of separation strategies, investigate the influence of syngas and minor gas components.

Hydrogen-based steel making route is another positive step toward green steel. Two different routes exist, direct hydrogen reduction and hydrogen plasma reduction. Small scale utilisation of hydrogen with up to 70% volume reduction was achieved, but the large-scale application is still under development.

The challenge lies mostly with the hydrogen-based DRI process, it produces 0% carbon which does not fulfil the carbon demand of the downstream process. The second issue is the supply of sufficient hydrogen. According to the study, the electricity cost for hydrogen production, considering the electrolysis to produce the hydrogen, should be less than 0.02 USD/kWh to make the process economically feasible. However, hydrogen storage supply and transportation costs are other scopes that still need to be explored.

Closing Comments

As on closing comments, steel production is one of the highest GHG emitting sources globally. If not controlled, the commitment at Paris Climate Summit 2015 to hold global temperature below 2℃ seems lost way before the set target date of 2050.

Promoting green steel production can be majorly significant with the targets. Technologies exist that can reduce GHG emissions, and some of them are under commission at a small scale; however, large scale implementation is yet to get approval from research integrity.

Existing technologies are very expensive, or they do have technical challenges which are economically costly to manage. Hydrogen-based steel production is a technology that looks very promising. Researchers are working on the project to analyse the economic and technical feasibility at a large scale.

The post Green Steel Production – Opportunities and Challenges first appeared on BioEnergy Consult.

However, due to several reasons; mostly due to financing issues, the sugar mill owners were not able to set up these plants. Only recently, after financial incentives have been offered and a tariff rate agreed upon between the government and mill owners, are these projects moving ahead.

The sugar mill owners are more than willing to supply excess electricity generated form the in-house power plants to the national grid but were not able to before, because they couldn’t reach an agreement with the government over tariff. The demand for higher tariff was justified because of large investments in setting up new boilers. It would also have saved precious foreign exchange which is spent on imported oil.

By estimating the CDM potential of cogeneration (or CHP) projects based on biofuels, getting financing for these projects would be easier. Renewable energy projects can be developed through Carbon Development Mechanism or any other carbon credit scheme for additional revenue.

Since bagasse is a clean fuel which emits very little carbon emissions it can be financed through Carbon Development Mechanism. One of the reasons high cogeneration power plants are difficult to implement is because of the high amount of costs associated. The payback period for the power plants is unknown which makes the investors reluctant to invest in the high cogeneration project. CDM financing can help improve the rate of return of the project.

Bagasse power plants generate Carbon Emission Reductions in 2 ways; one by replacing electricity produced from fossil fuels.  Secondly if not used as a fuel, it would be otherwise disposed off in an unsafe manner and the methane emissions present in biomass would pollute the environment far more than CO2 does.

Currently there are around 83 sugar mills in Pakistan producing about 3.5 million metric tons of sugar per annum with total crushing capacity 597900 TCD, which can produce approximately 3000 MW during crop season Although it may seem far-fetched at the moment, if the government starts to give more attention to  sugar industry biomass rather than coal, Pakistan can fulfill its energy needs without negative repercussions or damage to the environment.

However some sugar mills are opting to use coal as a secondary fuel since the crushing period of sugarcane lasts only 4 months in Pakistan. The plants would be using coal as the main fuel during the non-crushing season. The CDM effect is reduced with the use of coal. If a high cogeneration plant is using even 80% bagasse and 20% of coal then the CERs are almost nullified. If more than 20% coal is used then the CDM potential is completely lost because the emissions are increased. However some sugar mills are not moving ahead with coal as a secondary fuel because separate tariff rates have to be obtained for electricity generation if coal is being used in the mix which is not easily obtained.

One of the incentives being offered by the State Bank of Pakistan is that if a project qualifies as a renewable project it is eligible to get loan at 6% instead of 12%. However ones drawback is that, in order to qualify as a renewable project, CDM registration of a project is not taken into account.

Although Pakistan is on the right track by setting up high cogeneration power plants, the use of coal as a secondary fuel remains debatable.  The issue that remains to be addressed is that with such huge amounts of investment on these plants, how to use these plants efficiently during non-crushing period when bagasse is not available. It seems almost counter-productive to use coal on plants which are supposed to be based on biofuels.

Conclusion

With the demand for energy in Pakistan growing, the country is finally exploring alternatives to expand its power production. Pakistan has to rely largely on fossils for their energy needs since electricity generation from biomass energy sources is considered to be an expensive option despite abundance of natural resources. However by focusing on growing its alternate energy options such as bagasse-based cogeneration, the country will not only mitigate climate change but also tap the unharnessed energy potential of sugar industry biomass.

The post Bagasse-Based Cogeneration in Pakistan: Challenges and Opportunities first appeared on BioEnergy Consult.

1. Indefinitely Renewable

The majority of the world’s energy comes from burning fossil fuels. Fossil fuels are a finite resource. Once fossil fuel resources run out, new fuel sources will be needed to meet global energy demands. Biomass offers a solution to meet this need.

Organic waste material from agriculture and logging operations, animal manure, and sludge from wastewater treatment are all viable fuels for generating biomass energy. As long as the earth is inhabited, these materials will be readily available.

2. Reduce, Reuse, Recycle

Organic waste that would typically be disposed of in landfills could be redirected for biomass energy use. This reduces the amount of material in landfills and slows the rate at which landfills are filled. Some of the most common waste products used for biomass energy are wood chips and agricultural waste products. Wood materials can easily be converted from already existing wood structures that will be destroyed, such as wooden furniture and log cabins, preferably both would also come from responsible logging and practices as well.

As more organic waste is diverted from landfills, the number of new landfills needed would be reduced. Older landfills are at risk for leaking leachate. Leachate contains many environmental pollutants that can contaminate groundwater sources.

Burning fossil fuel releases carbon into the atmosphere which was previously trapped below ground. Trapped carbon isn’t at risk for contributing to global climate change since it can’t interact with air. Each time fossil fuels are burned, they allow previously trapped carbon to enter the atmosphere and contribute to global climate change. In comparison, biofuel is carbon-neutral.

The materials used to create biomass energy naturally release carbon into the environment as they decompose. Living plants and trees use carbon dioxide to grow and release oxygen into the atmosphere. Carbon dioxide released by burning organic material will be absorbed by existing plants and trees. The biomass cycle is carbon-neutral as no new carbon is introduced to the system.

3. Smaller Carbon Footprint

The amount of unused farmland is increasing as agriculture becomes more efficient. Maintaining open land is expensive. As a result, farmers are selling off their property for new developments. Unused open agricultural land could be used to grow organic material for biofuels.

Converting open tracts of land to developed areas increases the amount of storm-water runoff. Storm-water runoff from developed areas contains more pollutants than storm-water runoff from undeveloped areas. Using open areas to grow biomass sources instead of creating new developments would reduce water pollution.

Forested areas also provide sources of biofuel material. Open land converted to sustainable forestry would create new animal habitats and offset carbon emissions from existing fossil fuel sources as more plants and trees would be available to absorb carbon dioxide.

4. Social Benefits of Biomass Energy

Burning fossil fuels releases sulfur dioxide, mercury and particulate matter into the atmosphere which can cause asthma, cancer and respiratory problems. Biomass energy emits less harmful byproducts compared to fossil fuels, which means cleaner air and healthier people.

Biofuel can improve rural economies by providing more people with unused land the opportunity to grown biomass material for energy use. Workers would be needed to harvest and process the materials needed to generate biofuel.

Since biomass is a renewable energy source, energy providers can receive tax credits and incentives. Countries with land resources will be less reliant on foreign fossil fuel providers and can improve their local economies.

Increasing biomass energy usage can reduce forest fires. Selectively reducing brush can still reduce the risk of wildfires spreading. Exposing underbrush and groundcover to rainfall decreases the change of it drying out and creating optimal, fire spreading conditions.

Biomass Energy in Denmark

Denmark is an example of how effective biomass energy can be in improving energy efficiency. Approximately 70 percent of renewable-energy consumption in Denmark comes from biomass.

Woody biomass creates an increasing percentage of heating from combined heat and power (CHP) plants with a goal to for 100 percent of hearing to be derived from woody biomass by 2035. Another form of biomass is agricultural biomass. This form utilizes materials such as straw and corn to create end-products like electricity, heating and biofuels.

The Danish Energy Agency has developed a plan including four scenarios that will help Denmark become fossil fuel free by 2050. The biomass scenario involves CHP for electricity and district heating, indicating that biomass energy is important in Denmark’s energy sector today and will play an increasingly important role in the future.

Biomass offers an eco-friendly and renewable method of reducing pollution and the effects of global climate change. And, like other forms of renewable energy, the products needed to develop biomass energy are readily available.

The post Top 4 Benefits of Biomass Energy first appeared on BioEnergy Consult.

The race to Net Zero

The United Nations has sought to encourage this trend through its ‘Race to Zero’ campaign, which requires that participants identify their current emissions, and then execute a plan to deal with them, publishing their results along the way.

In practice, this means limiting emissions as much as possible, and then investing in offsetting to cover the rest. This might mean planting more trees to suck up the carbon in the long term. But there are other methods, too, and Bioenergy is among the most promising.

What is Bioenergy?

Bioenergy is energy that we obtain through biomass. If you’re burning timber, plants and food waste, then you’re generating Bioenergy. But burning is just one method of getting at the energy stored in living things: you might also store biomass in a sealed tank, so that it releases methane gas, which can be burned. Methane gas is much more damaging than carbon dioxide, and so storing the biomatter in a tank, rather than burying it, can be a net benefit for the environment, especially when compared with the alternative options.

Bioenergy has the advantage of being available everywhere in the world, which would make it a more secure form of energy that’s less vulnerable to changes in global supply. This goes especially if it’s part of a diversified range of energy sources.

Bioenergy capacity

One of the problems with Bioenergy is that it requires large amounts of land and water to be feasible. This is land that might be put to use elsewhere – in maintaining large forests and growing plants for human (and animal) consumption.

Of course, Bioenergy doesn’t need to entirely supplant fossil fuels in order to be useful. It can instead form a valuable part of a diversified green energy economy. It has the advantage over wind and solar in that the biomass can be stored – albeit temporarily. As such, we might see it used to smooth out any interruptions in power that come about when the wind stops blowing or the sun stops shining. A reputable energy transition law firm will usually recommend the technology alongside a suite of others, including solar, wind, carbon capture, and ‘new’ nuclear.

Provided that we’re planting as much biomass as we’re burning, this practice is effectively infinitely renewable and carbon-neutral. So, a firm might invest a given amount in energy from biomass, and then invest the rest in planting new trees to replace the ones being burned, in order to achieve its Net Zero ambitions.

The post How Bioenergy Can Help Businesses Achieve Net Zero first appeared on BioEnergy Consult.

From 2000 to 2016, the use of renewables in the United States more than doubled and is expected to continue to grow. In 2016, they made up about 10 percent of total energy consumption and 15 percent of electricity generation. During the last 5 years, green energy patents filing worldwide has increased by 50 percent. Consumption of renewable energy has grown worldwide due to government incentives and requirements for renewable energy and the desire to switch to cleaner fuel in order to protect the environment.

There are a number of different sources of renewable energy in use today. Here are some of the most common renewable energy resources and their applications:

Solar Energy

The U.S. solar industry has grown at an average annual rate of 68 percent over the last decade in the form of rooftop solar panels for individual buildings, solar farms built by utility companies and community solar projects, which produce solar for energy users in a certain area through a collection of solar panels.

In Australia the solar industry is also increasing with a record breaking 3.5 million panels installed last year. Queensland was the leader in solar panels that were installed.

Solar photovoltaic panels capture sunlight and convert it directly into electricity, which can power a small device such as a watch or sent into the grid to be distributed to a utility’s customers.

Wind Energy

People have been using windmills to utilize the wind’s energy for a long time, but today wind turbines are used to capture that energy and turn it into electricity. There are approximately 53,000 wind turbines operating in the United States today.

Wind turbines consist of a large tower, which is often around 100 feet tall, and several blades that use the power of the wind to spin. The blades are connected to a shaft that spins a generator in order to create electricity.

Like solar energy, power generated with wind can either be used for a specific application such as pumping water or powering a farm, or transferred into the electrical grid to meet other energy needs.

Useful Resource: Best MBA Programs for Renewable Energy

Biomass Energy

Biomass is another common form of renewable energy. Biomass is any natural substance such as wood, plant matter, gas from landfills and even municipal solid waste that contains stored energy from the sun.

When those substances are burned, they release that energy, which can be used as heat or fuel. Biomass can also be made into a liquid or gas that can be used as fuel.

Bioliquids, such as ethanol and biodiesel, are frequently used to power vehicles. Around 40 percent of the corn grown in the U.S. today is used for biofuels. Researchers are currently exploring new ways biomass can be used and additional substances that could be used for biomass energy.

Hydro Energy

Hydropower, energy generated with water, is one of the oldest and the most common renewable energy resource in the U.S., making up 6.5 percent of utility-scale electricity generation and 44 percent of generated renewable energy.

When water flows, it produces energy. We capture this energy by allowing moving water in rivers, waterfalls or elsewhere to turn generators that produce electricity. Hydroelectric plants can also be man-made, as is the case with dams. Man-made reservoirs hold water through the use of dams. That water is then released to flow through a turbine and create electricity.

Benefits of Renewable Energy

The main benefit of renewable energy sources is the fact that they release very little greenhouse gases and so are better for the environment. Because electricity makes up the largest share of our greenhouse gas emissions, changing how we get our energy is crucial in the fight against global warming.

Another key advantage is the fact that they are renewable, which means we won’t ever run out of them. This stability could make access to energy more stable in the future. It can also keep energy prices more predictable, because the markets are subject to changes in supply.

Renewable energy is also flexible and can power large areas or single homes. Additionally, renewable energy projects create a number of well-paying jobs and tend to have a significant economic impact.

Key Drawbacks of Clean Energy

Just like with fossil fuels, there are some disadvantages as well. Renewable energy plants are subject to fluctuations in wind, sunlight and other natural resources, meaning some days or in some particular months, a facility might produce more electricity than others. Today, in areas where renewables are common, fossil fuels are often used to make up any shortcoming in renewable energy production.

Due to their reliance on natural occurrences, renewables may fare better in some areas than others. An area with lots of direct sun all day long will be more suitable for a solar plant than somewhere that’s often dark and cloudy. Renewable energy projects also often require large areas of land, and while renewable energy tends to be cheap, initial construction and development costs can be quite high.

Despite these disadvantages, renewables are proving an important part of the energy mix of today and of the future, especially in the face of environmental concerns and worry about the availability of fossil fuels. Chances are we won’t see the end of the growing renewable energy industry any time soon.

The post Renewable Energy and its Applications first appeared on BioEnergy Consult.

Palm Kernel Shells

Palm Kernel Shell is generating very good traction as a renewable energy resource and biomass commodity in Japan. This is because PKS is the cheapest biomass fuel and is available in large quantities across Southeast Asia. PKS, a biomass waste generated by palm oil mills, can be found in plentiful quantities in Indonesia, Malaysia and Thailand.

PKS must meet the specifications before being exported to Japan. Some key specifications for PKS exports are: moisture content, calorific value and impurities or contaminants (foreign materials). All three variables must meet a certain level to achieve export quality. Japanese markets or their consumers generally require contaminants from 0.5 to 2%, while European consumers of PKS need 2% – 3%.

Japan usually buys with a volume of 10,000 tonnes per shipment, so PKS suppliers must prepare a sufficient stockpile of the PKS. The location of PKS stockpile that is closest to the seaport is the ideal condition to facilitate transportation of shipment.

Wood Pellets

Wood pellets are mostly produced in from wood waste such as sawdust, wood shaving, plywood waste, forestry residues, and related materials while using tools like track saws, table saws, circular saws, miter saws, etc. The development potential for quantity enlargement is also possible with energy plantations. Technically the properties of wood pellets are not much different from the PKS.

Wood pellet price is more expensive than PKS. Wood pellet production process is more complex than PKS, so wood pellet is categorized as finished product. The quality of wood pellet is generally viewed from its density, calorific value and ash content. Indonesia wood pellet export is not as big as PKS, it is also because of the limited producers of wood pellet itself.

Japan buys wood pellets from Indonesia mostly for testing on their biomass power plants. Shipping or export by container is still common in wood pellet sector because the volume is still small. Currently, the world’s leading producer of wood pellets come from North America and Scandinavia. Even for Indonesia itself wood pellet is a new thing, so its production capacity is also not big.

Future Perspectives

For a short-term solution, exporting PKS is a profitable business. Wood pellets with raw materials from energy plantations by planting the legume types such as calliandra are medium-term solutions to meet biomass fuel needs in Japan. Torrefaction followed by densification can be a long-term orientation. Torrified pellet is superior to wood pellet because it can save transportation and facilitate handling, are hydrophobic and has higher calorific value.

The post Biomass Market in Japan: Perspectives first appeared on BioEnergy Consult.

What is Biomass

Biomass comes from a variety of sources which include:

• Wood from natural forests and woodlands
• Forestry plantations
• Forestry residues
• Agricultural residues such as straw, stover, cane trash and green agricultural wastes
• Agro-industrial wastes, such as sugarcane bagasse and rice husk
• Animal wastes (cow manure, poultry litter etc)
• Industrial wastes, such as black liquor from paper manufacturing
• Sewage
• Municipal solid wastes (MSW)
• Food processing wastes

Biomass energy projects provide major business opportunities, environmental benefits, and rural development.  Feedstocks for biomass energy project can be obtained from a wide array of sources without jeopardizing the food and feed supply, forests, and biodiversity in the world.

1. Agricultural Residues

Crop residues encompasses all agricultural wastes such as bagasse, straw, stem, stalk, leaves, husk, shell, peel, pulp, stubble, etc. Large quantities of crop residues are produced annually worldwide, and are vastly underutilised. Rice produces both straw and rice husks at the processing plant which can be conveniently and easily converted into energy.

Significant quantities of biomass remain in the fields in the form of cob when maize is harvested which can be converted into energy. Sugar cane harvesting leads to harvest residues in the fields while processing produces fibrous bagasse, both of which are good sources of energy. Harvesting and processing of coconuts produces quantities of shell and fibre that can be utilized.

Current farming practice is usually to plough these residues back into the soil, or they are burnt, left to decompose, or grazed by cattle. These residues could be processed into liquid fuels or thermochemically processed to produce electricity and heat. Agricultural residues are characterized by seasonal availability and have characteristics that differ from other solid fuels such as wood, charcoal, char briquette. The main differences are the high content of volatile matter and lower density and burning time.

2. Animal Waste

There are a wide range of animal wastes that can be used as sources of biomass energy. The most common sources are animal and poultry manure. In the past this waste was recovered and sold as a fertilizer or simply spread onto agricultural land, but the introduction of tighter environmental controls on odour and water pollution means that some form of waste management is now required, which provides further incentives for waste-to-energy conversion.

The most attractive method of converting these organic waste materials to useful form is anaerobic digestion which gives biogas that can be used as a fuel for internal combustion engines, to generate electricity from small gas turbines, burnt directly for cooking, or for space and water heating.

3. Forestry Residues

Forestry residues are generated by operations such as thinning of plantations, clearing for logging roads, extracting stem-wood for pulp and timber, and natural attrition. Harvesting may occur as thinning in young stands, or cutting in older stands for timber or pulp that also yields tops and branches usable for biomass energy. Harvesting operations usually remove only 25 to 50 percent of the volume, leaving the residues available as biomass for energy.

Stands damaged by insects, disease or fire are additional sources of biomass. Forest residues normally have low density and fuel values that keep transport costs high, and so it is economical to reduce the biomass density in the forest itself.

4. Wood Wastes

Wood processing industries primarily include sawmilling, plywood, wood panel, furniture, building component, flooring, particle board, moulding, jointing and craft industries. Wood wastes generally are concentrated at the processing factories, e.g. plywood mills and sawmills. The amount of waste generated from wood processing industries varies from one type industry to another depending on the form of raw material and finished product.

Generally, the waste from wood industries such as saw millings and plywood, veneer and others are sawdust, off-cuts, trims and shavings. Sawdust arise from cutting, sizing, re-sawing, edging, while trims and shaving are the consequence of trimming and smoothing of wood. In general, processing of 1,000 kg of wood in the furniture industries will lead to waste generation of almost half (45 %), i.e. 450 kg of wood. Similarly, when processing 1,000 kg of wood in sawmill, the waste will amount to more than half (52 %), i.e. 520 kg wood.

5. Industrial Wastes

The food industry produces a large number of residues and by-products that can be used as biomass energy sources. These waste materials are generated from all sectors of the food industry with everything from meat production to confectionery producing waste that can be utilised as an energy source.

Solid wastes include peelings and scraps from fruit and vegetables, food that does not meet quality control standards, pulp and fibre from sugar and starch extraction, filter sludges and coffee grounds. These wastes are usually disposed of in landfill dumps.

Liquid wastes are generated by washing meat, fruit and vegetables, blanching fruit and vegetables, pre-cooking meats, poultry and fish, cleaning and processing operations as well as wine making.

These waste waters contain sugars, starches and other dissolved and solid organic matter. The potential exists for these industrial wastes to be anaerobically digested to produce biogas, or fermented to produce ethanol, and several commercial examples of waste-to-energy conversion already exist.

Pulp and paper industry is considered to be one of the highly polluting industries and consumes large amount of energy and water in various unit operations. The wastewater discharged by this industry is highly heterogeneous as it contains compounds from wood or other raw materials, processed chemicals as well as compound formed during processing.  Black liquor can be judiciously utilized for production of biogas using anaerobic UASB technology.

6. Municipal Solid Wastes and Sewage

Millions of tonnes of household waste are collected each year with the vast majority disposed of in open fields. The biomass resource in MSW comprises the putrescibles, paper and plastic and averages 80% of the total MSW collected. Municipal solid waste can be converted into energy by direct combustion, or by natural anaerobic digestion in the engineered landfill.

At the landfill sites, the gas produced, known as landfill gas or LFG, by the natural decomposition of MSW (approximately 50% methane and 50% carbon dioxide) is collected from the stored material and scrubbed and cleaned before feeding into internal combustion engines or gas turbines to generate heat and power. The organic fraction of MSW can be anaerobically stabilized in a high-rate digester to obtain biogas for electricity or steam generation.

Sewage is a source of biomass energy that is very similar to the other animal wastes. Energy can be extracted from sewage using anaerobic digestion to produce biogas. The sewage sludge that remains can be incinerated or undergo pyrolysis to produce more biogas.

The post Biomass as Renewable Energy Resource first appeared on BioEnergy Consult.

High Establishment Costs

However, The high cost of growing miscanthus has impeded its popularity. High establishment costs of miscanthus are as a result of the sterile nature of the crop, which means that miscanthus cannot be propagated from seed and instead must be propagated from vegetative material.

The vegetative material commonly used is taken from the root structure known as rhizomes; rhizome harvesting is a laborious process and when combined with low multiplication rates, results in a high cost for miscanthus rhizomes. The current figure based on Irish figures is €1,900 ha for rhizomes.

Promising Breakthrough

Research conducted in Teagasc Oak Park Carlow Ireland, suggests that there may be a cost effective of method of propagating miscanthus by using the stem as the vegetative material rather than having to dig up expensive rhizomes. The system has been proven in a field setting over two growing seasons and plants have been shown to be perennial.

A prototype miscanthus planter suitable for commercial up scaling has been developed to sow stem segments of miscanthus. Initial costs are predicted at €130 ha for plant material. The image below shows the initial stem that was planted in a field setting and the shoots, roots, and rhizome developed by the stem at the end of the first growing season.

Feedstock for AD Plants

Switching from maize to miscanthus as a feedstock for anaerobic digestion plants would increase profitability and boost the GHG abatement credentials of the systems. Miscanthus is a perennial crop which would provide a harvest every year once established for 20 years in a row without having to be replanted compared to maize which is replanted every year. This would provide an obvious economic saving as well as allowing carbon sequestration in the undisturbed soil.

There would be further GHG savings from the reduced diesel consumption required for the single planting as opposed to carrying out heavy seedbed cultivation each year for maize. Miscanthus harvested as an AD feedstock would also alleviate soil compaction problems associated with maize production through an earlier harvest in more favourable conditions.

Future Perspectives

Miscanthus is a nutrient efficient crop due to nutrient cycling. With the onset of senescence nutrients in the stem are transferred back to the rhizome and over-wintered for the following year’s growth. However the optimum date to harvest biomass to produce biogas is before senescence.

This would mean that a significant proportion of the plants nutrient stores would be removed which would need to be replaced. Fertiliser in the form of digestate generated from a biogas plant could be land spread to bridge nutrient deficiencies. However additional more readily available chemical N fertiliser may have to be applied.

Some work at Oak Park on September harvested miscanthus crops has seen significant responses from a range of N application rates. With dwindling subsidies to support anaerobic digestion finding a low cost perennial high yielding feedstock could be key to ensuring economic viability.

The post How to Reduce the Establishment Costs of Miscanthus first appeared on BioEnergy Consult.

Power generation and supply have been inadequate in Nigeria. This inadequacy of power limits human, commercial and industrial productivity and economic growth . What is the use of infrastructure without constant electricity? Even God created light first. Sustainable and constant supply of power should be one of the priority of government in nation development. Investing in biomass energy will cause an increase in the amount of power generated in Nigeria. Infact, biomass energy has the potential to resolve the energy crisis in the country in the not so distant future.

What is Biomass

The word biomass refers to organic matter (mainly plants) which acts as a source of sustainable and renewable energy. It is a renewable energy source because the plants can be replaced as oppose to the conventional fossil fuel which is not renewable. Biomass energy is a transferred energy from the sun; plants derives energy from the sun through photosynthesis which is further transferred through the food chain to animals’ bodies and their waste.

Biomass has the potential to provide an affordable and sustainable source of energy, while at the same time help in curbing the green house effect. In India the total biomass generation capacity is 8,700 MW according to U.S. of Commerce’s International Trade Administration, whereas the generating capacity in U.S. is 20,156  MW with 178 biomass power plants, according to Biomass Magazine.

Power Sector in Nigeria

Unfortunately, the total installed electricity capacity generated in Nigeria is 12,522 MW, well below the current demand of 98,000MW . The actual output is about 3,800MW, resulting in a demand shortfall of 94,500MW throughout the country. As a result of this wide gap between demand and output, only 45% of Nigeria’s population has access to electricity. Renewable energy contributed 19% of total electricity generated in Nigeria out of which biomass contribution is infinitesimal.

Electricity generation for Nigeria’s grid is largely dominated by two sources; non-renewable thermal (natural gas and coal) and renewable (hydro). Nigeria depends on non-renewable energy despite its vast potential in renewable sources such as solar, wind, biomass and hydro. The total potential of these renewables is estimated at over 68,000MW, which is more than five times the current power output.

Biomass Resources in Nigeria

Biomass can come in different forms like wood and wood waste, agriculture produce and waste, solid waste.

1. Wood

Electricity can be generated with wood and wood product/waste(like sawdust) in modern day through cogeneration, gasification or pyrolysis.

2. Agriculture Residues

In Nigeria, agricultural residues are highly important sources of biomass fuels for both the domestic and industrial sectors. Availability of primary residues for energy application is usually low since collection is difficult and they have other uses as fertilizer, animal feed etc.

However secondary residues are usually available in relatively large quantities at the processing site and may be used as captive energy source for the same processing plant involving minimal transportation and handling cost.

3. Municipal Solid Waste

Back then in secondary school, I learnt that gas could be tapped from septic tank which could further be used for cooking.  Any organic waste (like animal waste, human waste) when decomposed by anaerobic microorganisms releases biogas which can be tapped and stored for either cooking or to generate electricity.

Biomass can be used to provide heat and electricity as well as biofuel and biogas for transport. There are enough biomass capacity to meet our demand for electricity and other purposes. From climatic point of view, there is a warm climate in Nigeria which is a good breeding ground for bacteria to grow and decompose the wastes. There are plant and animal growth all year round which in turn create waste and consequently produce biomass.

In November 2016, The Ebonyi State Government  took over  the United Nations Industrial Development Organization (UNIDO) demonstration biomass gasifier power plant located at the UNIDO Mini -industrial cluster in Ekwashi Ngbo in Ohaukwu Local Government Area of the State. The power plant is to generate 5.5 Megawatt energy using rice husk and other available waste materials available. More of these type of power plants and commitment are needed to utilize the potential of biomass fully.

Why Biomass Energy?

Since biomass makes use of waste to supply energy, it helps in waste management. It also has the potential to supply more energy (10 times) than the one produced from sun and wind. Biomass energy in Nigeria will lead to increase in revenue generation and conserves our foreign exchange. Increase in energy generation will yield more productivity for industries and the rate at which they are shutting down due to the fact that they spend more on power will be reduced to minimal.

Many local factories/companies will spring up and foreign investors will be eager to invest in Nigeria with little concern about power. Establishment of biopower plants will surely create more jobs and indirectly reduce the number of people living in poverty which is increasing everyday at an alarming rate.

Africa’s most populous country needs more than 10 times its current electricity output to guarantee supply for its 198 million people – nearly half of whom have no access at all, according to power minister Babatunde Fashola. Biomass energy potential in Nigeria is promising –  with heavy investment, stake holder cooperation and development of indigenous technologies. The deployment of large-scale biomass energy systems will not only significantly increase Nigeria’s electricity capacity but also ease power shortages in the country.

The post Biomass Energy in Nigeria: An Overview first appeared on BioEnergy Consult.