Tag Archives: Draught Proofing

Wonderful Tips to Avoid Heat Loss from Your Home

  By | | , ,
9 Comments

Heat loss is a big problem to homeowners. It comes with various issues including a skyrocketing energy bill. Most of the heat is lost through the windows and doors. Luckily, there are some ideas that can help you improve insulation and lessen loss of heat. When choosing fixtures, timber doors and windows are a wonderful option for their amazing insulating properties. Additionally, here are 5 tips to avoid heat loss from your home.

Install curtains

Thick close fitting curtains and blinds will keep warm air inside your home. The curtains and blinds hit the colder window class and cools it down plus lessening draught. Consider installing a pelmet above your curtain rail to enhance thermal insulation more.

Blinds offer tremendous versatility and boost insulation in your home. These leave a smaller gap between slats where less heat escapes from. you can open the curtain and blinds to let the sun enter and close them in the night to lessen heat loss. Installing curtains is a wonderful idea to enhance the security of your home. These windows have hook shaped locks embedded in the window frame leaving them untouchable.

Choose an appropriate glass type

There are various kinds of glass offering different thermal efficiency. Luckily, modern double glazed windows have low emissivity coating. This means they can reflect heat back into your home. Therefore, they are a wonderful option because they offer better thermal insulation compared to plain glass with no coating.

Opt for double glazed windows

You should consider double glazed timber windows and doors in Melbourne to prevent heat loss. Single glazed options lose about 20 percent of the heat in your home. double glazed options have a gap between the panes of glass full of gas such as argon, xenon, and krypton, which is a poor conductor of heat. This helps to lessen chances of heat loss. A reliable company should offer slimmer glazing units for a contemporary and elegant appeal.

Use warm edge spacer bars

A perimeter spacer bar sits between 2 panes of glass holding them apart in double glazing. Spacer bars have desiccant for absorbing moisture that might be in the unit. It is made of aluminium for its high conductivity and ability to lose heat fast.

Warm space bars made of pre desiccated structural foam help enhance the temperature in the internal edge of glass by up to 65 percent. This is better than the use of aluminium spacers. Additionally, warm spacer bars reduce noise by about 10 percent to keep your home quieter and warmer.

Consider draught proofing

These windows allow the breeze to move at acute angles along your house. Therefore, with curtains windows, you will catch side breezes inside your house.It is a wonderful idea to consider modern windows and door but you have to realise that there is a chance of your home getting draughty with time. Consider installing draught proofing to enjoy more energy efficiency, sound proofing, and no chance of draught in your interior.

Mind your style

Choosing the right colour for curtains windows is a personal decision. Therefore, always ensure to choose a colour that effortlessly reflects your style. Luckily, wooden windows offer a wide range of colour options. It is very important to consider the design you are seeking to achieve. Crisp white is a wonderful option if you want a simple but timeless appeal on your home

Final thought

There are various consideration when choosing the best windows for your home. Keeping your home well insulated is a wonderful option. It comes with a variety of benefits including enhancing the appeal of your home, lowering energy bills, increasing comfort in your interior, and making your home more attractive to prospective buyers. A wonderful trick is to opt for double glazed timber windows that help lessen heat loss.

8 Ways To Make Your Property More Energy Efficient

  By | | , ,
1 Comment

There are many ways to make your property more energy efficient regardless of your budget. If you have more money to spend, then you can invest in some renovation work that will help you to reduce energy expenses. However, suppose your budget is on the lower side. In that case, you can purchase some features that are small and inexpensive but can have a massive impact on your final bill. But keep in mind that you should carry out extensive research for each energy-saving solution you would like to try. That will help you to determine what your final savings will be and which solutions are not ideal for your property.

How To Make Your Property More Energy Efficient

1. Get A Quality Roof That Will Keep All The Heat Inside

A quality roof is a key to every safe and energy-efficient property. Companies such as ClearAmber Shop offer roofing sheets made of various materials, such as corrugated roofing sheets or plastic roof sheets that will help you to keep all the heat inside the building. As a result, there will not be any heat leaking outside, and you will stop cold air from flowing inside.

Like this, heating will need a shorter time to make the interior warm, and you will use much less gas or electricity, depending on the radiators you have. Cutting down your gas and electricity usage will make the building more efficient and lower your energy bills at the same time.

2. Close Off Any Gaps In The Construction

Filling any gaps in your construction, also called draught proofing, will stop any cold air from flowing into the building. You can find these gaps anywhere around windows, doors, exposed piping, fittings, floorboards or loft hatches. You should also pay attention to any cracks in the walls. However, there are several easy ways how you can fix the issue. You can use silicone sealant to hold water away. Or there are other options such as self-adhesive foam strips, flexible fillers or shaped rubber or plastic.

For any larger gaps, you should consider trying expanding polyurethane foam which expands while drying and then sets hard. This way, you will be able to have the heating on for a shorter time during the colder months and save on energy expenses.

3. Use Smart Meter To Stay On Track With Your Electricity Usage

Having a smart meter will allow you to see how much electricity you use in real-time. This way, you will be able to identify your weaknesses. From there, you can plan what you will do to make your home more energy efficient. The smart meter will also allow you to set a timer for your heating. This way, the heating will be on only for a specific part of the day.

Energy-Saving Tips for Small Businesses

During the colder months, it can be tempting to leave the heating on for a bit longer. However, if you push turning the heating off further and further, you will need to pay more than you would like to. The timer will help you to make sure that you do not have your heating on for too long. Regulating the time will allow you to control your energy usage, and you will save money on your bills.

4. Wall Insulation Can Help You Cut Your Energy Bills In The Long Run

Wall insulation can be a costly procedure. However, it will become a worthwhile investment in the long run. Of course, the overall price depends on whether you want to have cavity, internal or external wall insulation. Then, you need to take into account the size of the property, as each type of wall insulation has a different price per square meter.

Each insulation has a different process and finish. However, they all have one purpose in common. They help you to ensure that there is no heat escaping through the walls and keep your energy usage balanced. This way, your building will be more energy efficient and will allow you to save the expenses on the bills every year.

5. Keep Your Home Warm With Floor Insulation

Just like with walls, many homes have problems with heat escaping from the room through the floor. There are different kinds of floor insulation, and you need to know which floor you have in order to pick the right solution for your property. You usually do not need to put floor insulation into rooms that are located upstairs.

But suppose a room is located above a space that is not heated, like, for example, a garage. In that case, you should consider floor insulation as a solution to make the building more energy efficient. You also need to remember that your building may have more than one type of flooring. Then, you will need to inquire about more kinds of floor insulation.

6. Consider If Solar Panels Are The Right Solution For You

It is no secret that solar panels are expensive and require a lot of space. However, if you have the financial means and enough space, then they will become one of the most effective features on your way to a more energy-efficient building. You should also carry out extensive research in order to find out if solar panels are a suitable solution for your building.

solar energy diy

If your research brings good news, then you will be able to generate your own renewable electricity. But there is one more obstacle that could ruin your plans for solar panel installation. If the building is in an area that is often covered in the shade, then it would not be the best investment for your property.

7. Include Energy Efficient Fittings In Your Property

Including energy-efficient fittings in your property can be a more affordable way to reduce your energy usage. For instance, you can place LED light bulbs throughout the property. Like this, you will save a significant amount of electricity, and they last up to 10 times longer than regular light bulbs. You can also invest in water-saving shower heads. These features regulate the amount of water you are using and can help you to cut down your expenses.

For the same purpose, you should consider purchasing low-flow taps that will help you to reduce the water usage in sinks. On top of that, you can also invest in low-flush toilets that will help you to regulate the flow of water even further. Such solutions can be affordable and easy to install. This way, you will reduce your energy usage significantly and stay within your budget.

8. Switch Off Devices When You Are Not Using Them

By switching off devices when you are not using them, you can save around £55 a year. In the long run, this can become a significant amount of money that you could use on some of the different needs of your property. You can turn the devices off at the plug. These days, most modern appliances are set in a way that will not upset their programming if turned off.

To make your job easier, you can also get a smart plug that will help you to turn off the devices all at once. Suppose you are not sure about any of your appliances and their settings. In that case, we recommend you check the manufacturer’s manual and follow the instructions.