What is the Best Cordless Finish Nailer?

A finish nailer is a powerful tool that is specifically made for both experienced and DIY home users. The finish nailer uses relatively smaller nails than other cordless nail guns but is designed to handle different jobs. A finish nailer is the best bet for installing trim, crown moulding or even suitable for specific cabinets and furniture finishing.

cordless-finish-nailer-DIY

What is the best cordless finish nailer?

A ‘finish nailer’ broadly refers to one with a 16 gauge, which is a little thicker nail than the 18 gauge brads. There can be a bit of confusion due to the fact of the higher the number of gauges, the thinner the nail will be. This is due to the number of nails that you can fit per inch (for example, 16 gauge = 16 nails per inch and 18 gauge = 18 per inch). Therefore, you need the right nail for the proper work, so that the structural integrity of the material is not splinted or harmed.

Cordless finish nailers are made by different and various reputable brands such as Dewalt, Makita and Porter-Cable. Still, all these brands offer similar to little different features.

What is the greatest advantage of Cordless Finish Nailer?

A finish nailer is a versatile commodity which can also be used for various tasks such as moulding, decorating, roofing and many other jobs. This can also move the nails from thin wooden panels to dense concrete material and other various materials.

Difference between angled and straight finish nailer

Angled finishing nailers are made to be for narrow or tight spaces project. This type of finish nailer is durable to drive more substantial gauged nails. Straight finish nailers, on the other hand, are used within open spaces, and it was built with sharper nails.

Features Of Best Cordless Finish Nailer

A cordless finish nailer is a durable and versatile tool to perform a range of tasks ranging from the installation of trim to the assembly of cabinets and furnishings. It is a reasonably robust tool that is built to drive comparatively smaller nails. Here is a great article on home newtools best cordless finish nailer

Below are the key features of the best cordless finish nailer:

1. Size and Weight

To finish work is usually a multi-day, all-day task. Which means you must hold your finish nailer device in your hand for extended periods. A cordless model doesn’t have a wired cord or pneumatic hose that you need to bring and handle with you. That lowers the stress on your wrists. Although, if your finish nailer is bulky, this might have an irreversible effect on your hand. On some models, the battery can add considerable weight to the tool. The greater the battery size, the more it will weigh and the larger it will be.

A cordless finish nailer needs to get into tighter spaces and work at odd angles compared to other nailers, so size is essential. Angled versions reduce the tool’s total height and can make use in tight spaces more straightforward. Search for a smaller, cordless finish nailer with a lighter, state-of-the-art battery that weighs as little as possible to help you continue to work for longer without hand fatigue.

2. Trigger Operation

There are two primary forms of trigger: bump fire and subsequent action. Faster is a bump-fire. You keep the pressure on the trigger and press the piston in the nail where you want to drive. This is quicker, so losing track of it is easier, and there is a higher chance of accidental shooting. A sequential operation allows you to release the trigger between the nails and press it in again before the next nail is pushed. It’s slower, but it’s a little safer and controllable.

Needless to choose either one or the other. There are many models on the market which accommodate both. And, if you’re not sure which one you want, or if there are moments when you’re going to need one, look for one that has both in features. These combination finish nailers either have some internal mechanism allowing you to switch between operating modes, or they enable you to switch triggers out. Others that will enable you to change triggers also don’t come along with the extra trigger. You’ll have to buy an extra one.

3. Quality

Although, many people believe in brand reputable when choosing tool quality. This is because a reputable company always protect their name and to do this, they keep on producing a quality product.

While there is no foolproof way to upfront predict tool quality, but reading feedback and trusting a well-known organization minimizes the risks of getting poor tool.

5. User friendly

We strongly recommend that you read reviews and check product details to find a model that will comfortable in your hands, given the simple cost of a finish nailer. This is a method that is expected to deliver reliable results depending on how you treat it. The standard of the job starts with your hand. It is believed anybody will want to choose a  non-cumbersome finish nailer.

best-cordless-nailer

6. Lighting

With LED light features, a finish nailer makes its way within dark spaces such as cabinets or low-light areas, like baseboards. A cordless model with LED lights will directly transmit shadowless light to the surface, so you will see what you are doing without external lighting.

7. Higher Nail Capacity

This is one of the essential features a best cordless finish nailer you have. Having higher nail capacity will assist you in concentrating on the work through the elimination of frequently nail refilled. Another benefit of higher nail capacity is that it saves time.

8. Nail Depth

Precision hitting is outstanding as firing is. Finishing nailer is expected to hit the appropriate depth of the nail. Many finishing nailers come with an adjustable depth sensor that helps you to set precision depth. So, when choosing your finishing nail to ensure it offers consistent nail depth across a variety of types of materials.

9. Jam Clearing

Tool-free jam clearing is one a great feature expected to look for in a finish nailer. Nail jam may occur at a time, and if your nailer does not possess smooth jam-free. There may be some difficulties in hunting down the nailer.

Although, jamming can be held to a minimum by keeping your nailer in place and making sure you use the right nails.

10. Warranty

An extended warranty is an indication that the manufacturer has faith in its materials and manufacturing. Search for the longest available warranty and a money-back guarantee just in case you are not satisfied with tools.

Final Word + Recommendation

Finish Nailer is commonly regarded as a technical tool, but this innovative tool has significantly changed the finishing game. This is the reason almost everybody or hobbyists are now using the device to execute their various projects. A cordless finish nailer is a versatile woodworker tool that helps to punch the nails seamlessly, and gives the woodworks a clean and finished look.

Cordless finish nailers are fantastic, and there are plenty of models available which you can select the right cordless finish nailer to suit your work needs.

Things to Consider For Your Roofing Project

Getting a new roof can sometimes be a very exciting experience. Your pets and kids can watch what’s going on in awe as they look at the professionals ripping, hauling, tearing and nailing things. They might just even be tempted to once in a while get as close as to the action as they possibly can. However, that’s, of course, extremely dangerous and you should keep careful watch over your children when all this is going on. Anyway, there a lot of things you need to think about before taking on a roofing project. Below are a few of them.

1. Go top shelf

If you don’t want to have roofing as something you need to think about again for a very long while, as well as give your place a few additional selling points when it comes time to move then you might want to consider going for high-quality products.

Selecting the right choice of roofing for your building involves picking the right roofing products. Things like copper flashing should be what’s running through your mind. If you didn’t know, well, it happens to be the most durable metal material used for sealing those joints where a wall meets the roof or a roof meets another roof.

2. Communication is the Key

Lack of proper communication is what makes most projects fail. This is exactly why you need to always make sure that you’re communicating enough with the contractor you’ve chosen to go with.

If the contractor you’ve chosen is not the type that follows up with you during the project unless you specifically ask them to, then you might want to seriously think again and get one that truly cares about being responsible. Good quality contractors are the ones that keep you updated every step of the way.

3. Shop around

Some roofing professionals don’t really care much when it comes to customer satisfaction because replacing roofs is often like a once-in-a-decade job or so. This means that they rarely rely on repeat business to keep them going, much less profitable.

Furthermore, most homeowners normally pick their roofers based on price, and a lot of these roofing contractors employ low-wage laborers ensure the lowest possible bids are what they deliver. All in all, be very careful with whom you decide to go with. Get yourself some trusted references from family, friends and neighbors and also check different manufacturers’ websites for certified installer lists.

4. Play close attention to all the paperwork

Quick jobs like these, which usually takes around two to five days to complete, depending on the roof’s size and style, involve tremendous amounts of money as well as liability. Ensure you understand all the essential documents required for this process to be successfully accomplished. One of the said documents includes the building permit which many towns require if you want to undertake a roofing project.

Bonus tip: Make sure you check with your insurance company before you undertake any projects to make sure you remain compliant with their terms. If you have any issues, we highly recommend visiting Consumer Insurance Report to get free insurance quotes.

Bottom Line

Your roof is arguably your house’s most important component. Without it can a house really be a house? After all, it’s what keeps the water out of the building during the rain. Even though no one really likes having to replace their roof, the aesthetic and critical function it serves is undeniable and can help reduce the pain you feel when having to spend all that money.

The Easiest Ways to Save Money on Your Utility Bills

As the climate warms, it’s more important than ever to consider how you can lower your carbon footprint as a homeowner.And lowering your carbon footprint has another huge benefit: you can often save money as a result of green upgrades to your home. For example, solar energy can save you around $600 a year in energy costs. Of course, there are many other reasons why you should use solar energy, but the primary reason to use it is that it is a renewable source, i.e., it will last for billions of years.

Besides making structural changes—like adding solar panels, for example, to your home, there are other ways to save on your utility bills such as turning off lights you’re not using. Below, we’ve gathered our tops tips for saving money on energy – and helping out the planet, too!

Take advantage of sunshine during the winter

The sun is basically free heat for your home. Homeowners can take advantage of what’s called passive solar design. During the day, open the curtains on south-facing windows to let the sunshine inside so it can warm up your house. This will keep your home considerably hotter during the colder months.

Don’t forget to close the curtains when the sun sets so you can keep as much of that trapped solar heat as possible. Consider investing in thick, insulated curtains, which will help keep heat inside your living spaces.

Pay attention to your ceiling fan’s rotation in winter and summer

As you may know, warm air rises. Instead of letting that warm air go up, up and away, you can leverage your ceiling fan to keep that warm air close to you and your family. Reverse your ceiling fan’s rotation so that it turns clockwise instead of counterclockwise. This will keep the hot air in your living spaces.

And during the hotter months, make sure the fan is spinning counterclockwise to pull hot air away from you.

Get a new roof

A new roof can make a huge difference in your energy savings. Best of all? Energy-efficient roofing helps you save money in both the colder and warmer months. Many new types of roofing are “cool roofs” which reflect more of the sun’s rays instead of allowing solar heat to permeate into the home. This means that you don’t have to run the AC as low or as often. In the winter, a new roof helps prevent warm air from escaping.

Plus, in many areas, you might be eligible for a government tax incentive for replacing an old roof with an energy-efficient version.

Seal drafts around windows, doors, and other areas of your home

One of the best methods for determining what areas of your home can be more energy-efficient is by conducting a DIY energy audit. To do an energy audit, light an incense stick and watch to see if smoke is pulled to cracks in the windows or under the doors. You can also sometimes feel drafts by simply putting your palm up around the edges of windows and doors. Once you find drafty areas, it’s important to seal up those holes with weather stripping or caulking.

Fixing air leaks will benefit you both in the summer and the winter because it helps keep your HVAC system from working overtime.

Invest in a smart thermostat

A smart thermostat is a prudent investment, especially if you regularly forget to turn off the A/C or heat when you leave for work or errands. That wasted energy can add up to a big utility bill at the end of the month. A smart thermostat regulates the temperature and automatically programs a specific range to keep you comfortable but turns off in unoccupied rooms.

Schedule regular maintenance

Routine maintenance is essential to promote the longevity of your HVAC system and to ensure that your home isn’t wasting energy. Make sure to replace filters at least once a month and keep tabs on how old your HVAC system is, most systems need to be replaced every 15-20 years.

Takeaways

There are a variety of reasons as to why it’s in your best interest to find ways to make your home greener. Not only do green upgrades ultimately save you money, they also help the planet during a time when a climate emergency is threatening our very existence. If you want to see a smaller utility bill and live a more eco-friendly life, utilize some of the tips mentioned in this article. You’ll save money and help save earth, too.