Pelletization of Municipal Solid Waste

MSW is a poor-quality fuel and its pre-processing is necessary to improve its consistency, storage and handling characteristics, combustion behaviour and calorific value. Technological improvements are taking place in the realms of advanced source separation, resource recovery and production/utilisation of recovered fuel in both existing and new plants for this purpose. In recent years, there has been an increase in the pelletization of municipal solid wastes.

RDF

What is Pelletization of MSW?

Pelletization of municipal solid waste involves the processes of segregating, crushing, mixing high and low heat value combustible waste material and solidifying it to produce fuel pellets or briquettes, also referred to as Refuse Derived Fuel (RDF).

The process is essentially a method that condenses the waste or changes its physical form and enriches its organic content through removal of inorganic materials and moisture. The calorific value of RDF pellets can be around 4000 kcal/ kg depending upon the percentage of organic matter in the waste, additives and binder materials used in the process.

The calorific value of raw MSW is around 1000 kcal/kg while that of fuel pellets is 4000 kcal/kg. On an average, about 15–20 tons of fuel pellets can be produced after treatment of 100 tons of raw garbage. Since pelletization enriches the organic content of the waste through removal of inorganic materials and moisture, it can be very effective method for preparing an enriched fuel feed for other thermochemical processes like pyrolysis/ gasification, apart from incineration.

Production of MSW Pellets

RDF production line consists of several unit operations in series in order to separate unwanted components and condition the combustible matter to obtain the required characteristics.

The main unit operations are screening, shredding, size reduction, classification, separation either metal, glass or wet organic materials, drying and densification. These unit operations can be arranged in different sequences depending on raw MSW composition and the required RDF quality.

Various qualities of fuel pellets can be produced, depending on the needs of the user or market. A high quality of RDF would possess a higher value for the heating value, and lower values for moisture and ash contents. The quality of RDF is sufficient to warrant its consideration as a preferred type of fuel when solid waste is being considered for co-firing with coal or for firing alone in a boiler designed originally for firing coal.

Uses of MSW Pellets

MSW pellets can be used for heating plant boilers and for the generation of electricity. They can also act as a good substitute for coal and wood for domestic and industrial purposes. The important uses of RDF are found in the following spheres:

  • Cement kilns
  • RDF power plants
  • Coal-fired power plants
  • Industrial steam/heat boilers
  • Pellet stoves

The conversion of solid waste into fuel pellets provides an alternative means for environmentally safe disposal of garbage which is currently disposed off in non-sanitary landfills. In addition, the pelletization technology provides yet another source of renewable energy, similar to that of biomass, wind, solar and geothermal energy. The emission characteristics of RDF are superior compared to that of coal with fewer emissions of pollutants like NOx, SOx, CO and CO2.

About Salman Zafar

Salman Zafar is the CEO of BioEnergy Consult, and an international consultant, advisor and trainer with expertise in waste management, biomass energy, waste-to-energy, environment protection and resource conservation. His geographical areas of focus include Asia, Africa and the Middle East. Salman has successfully accomplished a wide range of projects in the areas of biogas technology, biomass energy, waste-to-energy, recycling and waste management. Salman has participated in numerous national and international conferences all over the world. He is a prolific environmental journalist, and has authored more than 300 articles in reputed journals, magazines and websites. In addition, he is proactively engaged in creating mass awareness on renewable energy, waste management and environmental sustainability through his blogs and portals. Salman can be reached at salman@bioenergyconsult.com or salman@cleantechloops.com.
Tagged , , , , , , , , , . Bookmark the permalink.

14 Responses to Pelletization of Municipal Solid Waste

  1. Pingback: Pelletization of Municipal Solid Wastes « TERI University Alumni Association's Blog

  2. Pingback: Welcome to Follow a Field 2014!!

  3. Pingback: Enumerating Advantages of RDF | Cleantech Solutions

  4. Pingback: Waste-to-Energy in Saudi Arabia | BioEnergy Consult

  5. Pingback: Biomass Energy Scenario in Southeast Asia

  6. Pingback: POME as a Source of Biomethane | BioEnergy Consult

  7. Pingback: How Green is Biomass | BioEnergy Consult

  8. Pingback: Moving Grate Incineration: The Most Common WTE Technology

Share your Thoughts

This site uses Akismet to reduce spam. Learn how your comment data is processed.