Water Conservation: 8 Easy Ways to Save Water at Your Home

The importance of saving water cannot be understated, especially as many countries around the world are facing drought conditions. Of course, there is an endless list of small changes you can make as a homeowner to improve the water-saving efficiency of your home, and they add up to a potentially significant difference in the long-term.

1. Repurpose Water

A staggering amount of water literally goes down the drain each day, when there are plenty of smart, safe ways to conserve as much of it as possible. Your bathroom is a key contributor to single-use wastage, and by keeping a container on the floor of your shower you can collect liters with each use. Meanwhile, in the kitchen, even seemingly small things like using a container to catch the water used in washing fresh produce can make a difference over time.

2. Get Smart About Lawn Care

It’s a common misconception that maintaining a healthy lawn requires a plentiful supply of water. Even during water-restricted periods, keeping your grass green is possible – you just have to get clever about your lawn care practices. Depending on the severity of restrictions, you may only be allowed to water your garden and lawn on certain days and at set times of day, and this will probably be enough, as long as you follow a few guidelines.

If possible, it’s best to water your plants and grass in the evening so that the water has plenty of time to soak into the soil and roots without the threat of evaporation. In case you’re unsure whether to water or not, feeling the topsoil for dryness will give you the best indication. Another interesting option for a smart and healthy lawn is to go for artificial grass or drought-tolerant landscape.

3. Use the Half-flush

The second button on the toilet is more than just an aesthetic feature. In fact, the half-flush button can save as much as 70% of the water used in a full flush, owing to the difference in flushing design. A wash-down design and a large trap way make it easier for waste to flow down the drain, meaning less water is required. If you can afford to replace an old, inefficient system, you stand to save a lot of water (and by extension, money) in the long-term.

4. Use Dual Sinks

Washing dishes by hand gets a bad rap in terms of water efficiency, and it often uses more water than a dishwasher, but it’s possible to prevent a great deal of wastage by using your sink effectively. If you have a double-barreled sink, using one side for washing and the other for rinsing will allow you to wash an unlimited load without needing to refresh the water.

5. Check the Ratings

Every water-using device has an efficiency rating, and choosing a well-rated model will help you prevent unnecessary wastage at the source. In some countries, large devices like dishwashers and washing machines come with a star rating to give an indication of their efficiency, and even if they don’t, you can still do your own comparative checks.

In the US, the toilet is typically the biggest source of water wastage, followed by the shower and faucets, but with modern water-efficient designs like water-saving vacuum toilets and low-flow showerheads, much of that water could be preserved.

6. Install Water-Saving Faucets

The only thing more efficient than collecting and re-using run-off from the shower is using less water at the source, and the right faucet can help with that. You can use touchless faucets in your kitchen as well as it can save a lot of water. According to myhomeneedz, a touchless kitchen faucet can save up to 20% water compared to normal faucets.

Just like dishwashers and washing machines, faucets often come with a water-efficiency rating, but they can also be made more eco-friendly through simple add-ons like aerators. An aerator installation is a perfect project for eco-conscious lovers of DIY – once it’s done, the difference will be practically undetectable, and you’ll be saving liters without even trying.

7. Buy Smaller Machines

Devices like dishwashers and washing machines are becoming more water-efficient with each passing year, but the fact remains that large machines tend to use much more water than their smaller counterparts. A smaller device will also make it easier to commit to only running full loads, since it will take less time to fill.

You might even consider investing in a double-gallon dishwashers, designed to run smaller loads with half the amount of water – there’s plenty of technology available to help in your quest to use less.

8. Install a Water Tank

If you have the money and the space available on your property, a water tank is one of the best long-term water-saving investments you can make. Even the average backyard water tank allows for the collection of several hundred liters, which is more than enough to keep your yard in good condition or fill your bathtub many times over. Tanks can be expensive to buy, but the savings you stand to make on your water bills will make it all worthwhile.

Fresh drinking water is a precious resource, and developing efficient usage habits and adopting eco-friendly plumbing has never been more important. The bottom line is that saving water isn’t difficult, and with a few tips and tricks up your sleeve, you’re fully-equipped to start doing your bit for the environment and the world as a whole.

5 Reasons Why You Need a Water Softener for Your Home

Tap water that we use for in our daily purpose contains minerals like calcium, lime, chalk, and magnesium. The increased levels of these minerals in water make it hard. Hard water is unhealthy for consumption and for domestic use. Although many people use mineral water for drinking, excessive use of mineral water can result in health and domestic hazards. It’s essential to remove excess levels of minerals from water to make it suitable for drinking as well as for domestic use like bathing, washing, cleaning, etc. Water softeners are filters that convert hard water into softer water by filtering out the minerals.

Below are few important reasons why you should install a water softener in your home:

1. Easier Cleaning

When you wash dishes and clothes in hard water, they may end up with white spots, streaks, and soapy residue. Soft water helps to rinse off the soap residue more thoroughly, leaving your dishes and clothes cleaner. Moreover, water softening also reduce the amount you use for detergent or soap you need for cleaning, which helps to save your expenses for these products.

You will notice that house water softeners prevent the detergent curd and soap film buildup in bathtubs, showers, sinks, and other cleaning devices, and they stay cleaner and efficient.

2. Keep Your Skin Smooth and Well-Nourished

The calcium and magnesium present in hard water mix with anions in soaps resulting in soap scum on your body or sticky skin. This film does not dissolve even with rinsing and stays on your skin causing clogged pores, skin irritation, and dry or itchy skin.

Moreover, using dry water on the skin can also lead to acne. Therefore, install water softener in your home because bathing with soft water is better for your skin.

3. Extended Water Appliance Life

Minerals of hard water can buildup in washing machines, dishwashers, coffee makers and other water appliances. This can result in clogging of minerals within these devices which can cause them to burn out. It’s better to invest in a water softener that will prevent the minerals from building up within these appliances.

Therefore, use of soft water helps to extend the life of water appliances. You will end up saving money because these devices will last longer, and you will be replacing them less frequently.

4. Faster Heating of Water

Your water heaters can quickly heat soft water, while heating hard water requires comparatively more time. It is estimated that water softeners can improve the efficiency of electric water heaters by 22 percent and that of gas water heaters by 29 percent. If you are using a walk in tub, it will help in faster heating of water for bathing.

Hard water can also cause mineral buildup in the water heaters, decreasing their efficiency to heat water. Water softeners improve the efficiency of water heaters resulting in lower utility bills.

5. Reduce Pipe and Faucet Damage

Hard water causes scaly deposits in pipes and faucets. Your home plumbing system is severely affected as these deposits buildup over time, resulting in clogs and corrosion.

Moreover, hard water can also clog your showerheads and valves. Water softeners eliminate the mineral buildup in your plumbing system, extending its life and helping your fixtures to operate effectively.