How to Reduce HVAC Energy Consumption at Home and Cut Your Power Bill

Heating and cooling account for more than 50% of home energy consumption. If you are paying a lot in the name of energy bills, your HVAC system is most likely the primary cause. It is vital to cut down on the energy consumption of utilities to save money (and energy). Energy companies such as American Power and Gas, suggest consumers and homeowners pay special attention to their HVAC system. as heating and cooling cost make up about 40% of your energy bills.

It may also be wise to consider switching to a system that operates on solar or other forms of renewable energy––Providing if it can be afforded.

Here are some ways you can reduce HVAC energy consumption:

Programmable Thermostat to The Rescue

HVAC units can be made to consume less energy with the help of programmable thermostats.

The DOE recommends reducing room temperature to 15 degrees in winters when you are not home for 8-10 hours. Similarly, they suggest increasing the temperature by around 15 degrees in summers when you are not going to be home for half the day. This will help you save about 15% more energy annually.

The benefit that programmable thermostat gives you is that you won’t have to manually adjust the temperature every day. You can simply program it to change the temperature and save energy. It also has the added plus of operating on a timer so you don’t have to worry about leaving it on throughout the day.

Maintain The Coils Of Your AC Unit

The outdoor unit of the AC can allow dirt and debris to pass through it and gather around the coils and reduce the efficiency of the AC, as a result the unit consumes more energy to keep the room cool.

Keep your outdoor unit clean from dirt, fallen leaves, and other debris to make it work perfectly. If you believe that your outdoor unit needs cleaning, shut it off and use a vacuum to pull out all the dirt.

Inspect Air Filters 

Air filters need special attention as they can get blocked due to dirt and debris. They need to be replaced every season as damaged filters put extra pressure on the unit causing energy to be wasted.

Other than this, you should also replace the filters every now and then. This is not a very tough job and you can do it on your own.

Here’s how to do it:

  • Remove the filter and check for debris stuck in the filters.
  • Keep the filters under light to see if it’s able to pass through. If it doesn’t then you will have to wash the filters.
  • Clean the filters with a toothbrush, or another such tool first.
  • Put the filters in soapy water for a few hours, dry and see if the light passes again. If it does then you can re-apply those, otherwise, you may have to change the air filters.

The average life expectancy of air filters is about 2 to 3 months if they aren’t maintained. Otherwise, they can easily run for a year.

Out With The Old, In With The New

HVAC systems can be costly but if you have been using one for more than 10 years now then it’s time to replace it with a modern and an energy efficient HVAC system.

AC Coils of HVAC systems require regular cleanup

A Clean Way to Cool Down

You can also consult with your energy provider regarding making the switch to renewable energy services. You can also look into energy storage systems such as Tesla’s solar panels that can drastically cut your power bill and provide clean sustainable energy for your home.

The Verdict

Around 48% of US home energy consumption is directly attributable to HVAC use and heating or cooling. These are some of the most efficient ways which you can reduce the amount of energy consumed by your HVAC system.

Saving Energy and Money With Effective Heating and Air Conditioning

Did you know that heating and air conditioning can make up for half of your total energy bill? That’s a lot of money and a lot of energy use. If your heating and air aren’t working properly they can’t effectively use that energy and that costs you money and sends more greenhouse gases into the environment. Below we will list a few ways you can keep your energy bill low and your heating and air systems running smoothly and efficiently.

Limit Use

Use the seasons to your advantage and limit your use of heating and AC. Close your blinds in the summer to keep the sun from working against your air conditioning and open the curtains in the winter time to have the sun help your heating.

Consider if your thermostat has a feature that can be set on a timer so you can limit the use of your heating and air conditioner when no one is in the house or at night. These seem like simple things but they can reduce your costs significantly when done regularly.

Regular Maintenance

Don’t forget to do regular maintenance to ensure your HVAC system is working efficiently. Simple things like changing you air filters can make a huge impact on how well your heating and air conditioning runs. Have a professional come at least once a year to check for any problems you may miss and ensure everything is OK.

hvac-repair

Your contractor should measure the voltage of your motors and tighten electrical connections. They should also check for drainage that may cause water damage to your home. These regular check ups also ensure your systems are running properly and safely.

Sealing Ducts and Leaks

Ducts are responsible for distributing the air around your home. However, about 20 percent of air is lost through leaks and poorly connected ducts. This means you’ll be pumping up the AC to no affect and losing money in the process.

Sealing leaks that are visible in the attack, crawl space, or basement of your home is as easy as buying a sealant or tape meant for insulating your ducts. Check for and seal any visible leaks or poor connections. If you prefer to stay away from dirty attics or crawl spaces a contractor can easily do this for you as well.

Insulation

Insulating your home can save you up to 10 percent on your annual energy bill and make your home comfortable all year long. The attic is an ideal place to add insulation to your home and when done correctly can save the most money and energy. Also consider your windows and doors.

Heating and cooling can easily escape through old doors and windows making your system inefficient. Have a contractor look at these places in your home and see if they can help insulate your home so it can run comfortably.

These are just a few examples of ways you can make your home more energy efficient thus saving your wallet and giving a little help to the environment. Find a contractor like Empire HVAC that can look at your home and determine the best route for your house. Different systems have different needs and a professional can tell you everything your house needs to keep you comfortable, regardless of weather  conditions.

NatHERS – A Tool To Maximize Sustainability of Your Future Home

Short for the Nationwide House Energy Rating Scheme, NatHERS uses a 10-star rating system which is able to easily access the thermal performance of buildings within Australia. Though a NatHERS certification is required for all new developments with multiple dwellings, it is essential for all residents to obtain an assessment to be able to easily evaluate the thermal assessment of their development.

At Certified Energy, our years of experience distinguishes us from our competitors. We work with each client separately, to ensure that each individual project thrives in terms of cost, efficiency and the preservation of design concepts.

We strive to minimize your costs whilst maximizing the sustainability of your future home.

Why is NatHERS assessment required?

NatHERS as outlined above is the Nationwide House Energy Rating Scheme which is able to evaluate the thermal performance of any dwelling. Though this may seem irrelevant and unnecessary when outlining the overall performance of the building, it is a necessity to get a NatHERS assessment in order to ensure a sustainable future for our environment.

Not only this, but NatHERS is essential when obtaining a BASIX assessment. BASIX is a NSW Government initiative striving to improve the environmental sustainability. It comprises of three factors: water, thermal and energy. The thermal component of BASIX can be easily completed through a NatHERS assessment with its thorough, accurate and flexible approach to addressing thermal performance.

Thus, a NatHERS assessment is required not only to contribute towards a sustainable future for the environment but also as a necessity under the BASIX initiative led by the NSW Government.

What does a NatHERS assessment include?

A NatHERS assessment can be obtained by a specialised company that has NatHERS Accredited Software which can be used to determine the thermal efficiency of your home. Within the assessment, each resident will be provided a copy of the key design features and the building materials and the scope used to generate the dwelling’s star rating.

The star rating, also known as the Energy or Thermal Efficiency star rating, is an accurate indicator of the level of heating or cooling your building requires to not only make you feel comfortable, but to ensure that it doesn’t have a detrimental impact on the environment. By following the recommendations and guidelines that will be included in your report, you will also be on the path of having lower energy expenses, by using the appropriate amount of electricity.

How does Certified Energy do it differently?

At Certified Energy, there are two main certification solutions that will help you achieve the lowest cost with the highest efficiency rating. These include the essential solutions (House Energy Rating Scheme, Elemental Provision) or alternative solutions (Verification Using a Reference Building and State Specific Energy Protocols).

In order to give you the best catered advice as per your personal needs, Certified Energy will guide you through the various approval pathways that will help your project achieve energy efficiency and environmental sustainability.