Tag Archives: filters

4 Simple Furnace Repair Tips

  By | | , ,
2 Comments

Experienced HVAC repair technicians perform furnace repair and maintenance services. They have years of experience repairing high-end furnaces, including both wood-and hybrid models. Whether you’re having trouble with your boiler or other heating device, it’s best to contact an experienced technician. They will be able to diagnose the issue, offer the most effective solution, and fix your furnace in less time than it would take you to replace it. With trained furnace repair professionals by your side, you can feel confident that they will do their best to make your heating unit run as efficiently as possible.

furnace-repair-professionals

There are several things to look out for when trying to repair your heating system. Here are the simple tips for furnace repair:

1. Proper Certifications

One of the first steps is making sure the technician has the proper certifications. In order to qualify, he must fulfill HVAC National Board Certified Qualifying Board (HVAC NSB) qualifications. As part of being certified, he must also complete a comprehensive heat installation training program and pass the state exam. When checking out prospective technicians, make sure to ask what certifications they hold and how long they’ve been doing this type of work.

2. The Right Equipment

Next, it’s important to check out the technician’s equipment. Since many HVAC services perform work using heaters, it’s important to find out what kind of equipment they’re using. Ask to see their gas tank to see if the gas is topped off. If so, it’s a good idea to wait a few hours while the technician tops off the gas. Leaving the gas in for too long can cause serious problems like leaks and possibly explosions. If you notice signs of wear or damage on the heating equipment, contact the gas company immediately.

If the furnace repair is running but not producing enough heat, there are several steps you can take to troubleshoot the issue. First, turn the power to the furnace on and check to make sure it’s actually functioning. If it’s not, then the next step is to open the furnace door safety switch. This is located directly above the furnace itself. You’ll need to unscrew the two screws that are holding it in place and pull the safety switch straight down. It’s important to note that this step doesn’t require any tools and will allow you to safely open the door.

3. Check the Filters

Next, if you find that the furnace filters are clogged, these are the repairs you’ll need to do. Remove the filter from the furnace and wipe it clean with a damp cloth. If it appears to be damaged or dirty, you may need to purchase new filters. If not, simply replace the ones you’ve removed and wipe the rest of them clean with another cloth.

4. Cool off the Blower

For the last step in furnace blower repairs, you’ll need to remove the blower and place it in an open space to allow it to cool off completely. This step is particularly important if your heating system hasn’t been running for a while and you’re afraid of overheating it again. Once the blower has cooled down completely, it can be removed from the system. Again, you’ll need to perform all of these steps one at a time in order to ensure you don’t skip any of the necessary parts.

5. Tackling Gas Leaks

One more furnace repair tip involves cleaning and repairing gas leaks and defective heat exchangers. These are especially common in older heat and air-conditioning equipment, often resulting from poorly maintained duct work and outdated insulation. Blocked ducts allow cold air to freely enter the furnace room, which then warms up the interior of the room. Warm air can create a drafty environment inside the house, causing expensive energy bills to go through the roof.

Blocked ducts are also known to cause hot spots, especially in areas where there’s not enough duct work in the house. These hot spots will typically show up as small bluish-green stains in ceilings, walls, doors, and windows.

To fix hot spots and prevent drafty drafts, you can perform a filter change on your furnaces. It’s important to note that filters should only be changed with a qualified technician, as filters can be dangerous if changed by an untrained consumer. Filters should be replaced every three to six months, depending on the size of the filter, but they should always be replaced before they become blocked with dust or grime. Furnace repair professionals can perform the proper filter change for your furnaces and can guarantee that the process is done right.

How Do You Maintain An Outdoor Water Feature?

  By | | ,
1 Comment

As beautiful as it is to have a water feature in your outdoor space, the work doesn’t stop just by putting it in your desired area. An outdoor water feature, small or large, centerpiece or not, needs the same good amount of maintenance to preserve its beauty and serve its purpose. Keep your garden free of moss, undesirable weeds, and insects if you want it to be a relaxing and tranquil oasis.

Luckily, taking care of your outdoor water features isn’t something you should worry about too much. If your garden is still new and you’re a little bit lost on what to do, we got you all covered! Below are some helpful tips on properly maintaining your outdoor water feature and preserving the natural beauty of your lovely relaxing area.

how to maintain outdoor water feature

1. Constantly check your water levels

It’s only natural for your outdoor water feature’s water levels to change from time to time. We can’t always control factors such as splashes, evaporation due to the weather, and birds or other animals coming in the piece. So, to safeguard your water features, the best thing you could do is constantly keep an eye on its water levels. Make sure it has its necessary amount so it won’t dry out. You can either manually refill the water or purchase an autofill device to keep your water levels in check.

You might not get the right amount, so you should refill your fountain or pond right after you get rid of all the moss and other unwanted things on your water feature. If you fill it first and then take out some fallen leaves, most likely water will also get carried out, resulting in a lower level after cleaning.

The water level is what makes up a water feature. One of the most important things in outdoor water fountain maintenance is making sure it has what it needs the most – water.

2. Clean your skimmers and filters from time to time

Water features like fountains have a tool called filters and skimmers. They are made to ensure that the water inside your fountain is as clear as day and that no unwanted debris would be floating around it. To keep your water clean and your filters properly working, you need to pay good attention to it and check whether there isn’t anything stuck on it that would keep your water restricted.

Keep track of your skimmer’s debris basket, make sure it’s not too full, or your water feature will have a slower water flow. You should constantly check filter mats. They’re built to last until two years, so if your mat appears to be shabby and faded, then it’s time to replace it with a newer one to help unwanted debris be placed in the right basket and not get stuck on the filter’s other parts.

Lastly, in maintaining filters and skimmers, make sure you clean the pump from time to time. Doing this will be easy by simply unplugging the pump and manually removing any undesirable materials trapped on it from top to bottom.

3. Get rid of algae using a bristle brush

Not to state the obvious, but people need to get reminded of how much a simple cleaning with a bristle brush can do to your outdoor water feature. Algae can multiply in an outdoor water feature with water in it 24/7 and its location, exposed to different seasons and external factors. If not taken care of properly, you might witness your fountain or pond turn into an elegant work of art to those props used to scare people in a horror movie.

To restrict algae growth and other bacterial manifestations, manually cleaning it with a bristle brush should be practiced. Additives can also be utilized. One thing you can do, for example; barley is a natural algae deterrent so that you can use it alongside your brush. EPA-registered algaecides are also available, so you won’t have a hard time finding the right detergent or solution.

Bottom Line

Outdoor water features might need a little care and maintenance, but we have to realize that you must preserve every beautiful thing. So people can admire it longer, and it can serve its purpose better. Like any other feature in your garden, you should also give your fountain and pond the same amount of attention and importance.