Tap water that we use for in our daily purpose contains minerals like calcium, lime, chalk, and magnesium. The increased levels of these minerals in water make it hard. Hard water is unhealthy for consumption and for domestic use. Although many people use mineral water for drinking, excessive use of mineral water can result in health and domestic hazards. It’s essential to remove excess levels of minerals from water to make it suitable for drinking as well as for domestic use like bathing, washing, cleaning, etc. Water softeners are filters that convert hard water into softer water by filtering out the minerals.
Below are few important reasons why you should install a water softener in your home:
1. Easier Cleaning
When you wash dishes and clothes in hard water, they may end up with white spots, streaks, and soapy residue. Soft water helps to rinse off the soap residue more thoroughly, leaving your dishes and clothes cleaner. Moreover, water softening also reduce the amount you use for detergent or soap you need for cleaning, which helps to save your expenses for these products.
You will notice that house water softeners prevent the detergent curd and soap film buildup in bathtubs, showers, sinks, and other cleaning devices, and they stay cleaner and efficient.
2. Keep Your Skin Smooth and Well-Nourished
The calcium and magnesium present in hard water mix with anions in soaps resulting in soap scum on your body or sticky skin. This film does not dissolve even with rinsing and stays on your skin causing clogged pores, skin irritation, and dry or itchy skin.
Moreover, using dry water on the skin can also lead to acne. Therefore, install water softener in your home because bathing with soft water is better for your skin.
3. Extended Water Appliance Life
Minerals of hard water can buildup in washing machines, dishwashers, coffee makers and other water appliances. This can result in clogging of minerals within these devices which can cause them to burn out. It’s better to invest in a water softener that will prevent the minerals from building up within these appliances.
Therefore, use of soft water helps to extend the life of water appliances. You will end up saving money because these devices will last longer, and you will be replacing them less frequently.
4. Faster Heating of Water
Your water heaters can quickly heat soft water, while heating hard water requires comparatively more time. It is estimated that water softeners can improve the efficiency of electric water heaters by 22 percent and that of gas water heaters by 29 percent. If you are using a walk in tub, it will help in faster heating of water for bathing.
Hard water can also cause mineral buildup in the water heaters, decreasing their efficiency to heat water. Water softeners improve the efficiency of water heaters resulting in lower utility bills.
5. Reduce Pipe and Faucet Damage
Hard water causes scaly deposits in pipes and faucets. Your home plumbing system is severely affected as these deposits buildup over time, resulting in clogs and corrosion.
Moreover, hard water can also clog your showerheads and valves. Water softeners eliminate the mineral buildup in your plumbing system, extending its life and helping your fixtures to operate effectively.
Money is a scarce resource. Don’t let monthly bills break your bank while there are numerous things you can do to minimize them. From adding attic insulation to insulating outlets, and installing programmable thermostats, you’ve countless options for reducing your utility bills. Check out the following tips for cutting down your monthly expenses affordably and more effectively. Plus, you will learn everything utility bills.
Incorporate Attic Insulation
Most of the energy people use at their homes goes toward heating or cooling. Research shows that most of this heat escapes to the attic. Most homes lack enough insulation up there to prevent heat from getting out.
Fiberglass insulation is extremely cheap and easy to install. In fact, you can quickly install them on your own. By effectively insulating your home, you could actually save up to 20 percent on your heating, as well as, cooling costs.
But if you can’t install attic insulation yourself, you can always get help online. There are numerous DIY tutorials that can help you through the process.
Install Programmable Thermostats
By installing a programmable thermostat, you’ll be able to save up to 10 percent on your utility bills. Set your unit’s temperature to drop during winter months and raise them during the summer months when you aren’t home. You can then program the unit to return to more comfortable temperatures right before you get home.
This will go a long way in reducing your energy bills and saving you substantial amounts of money. So, what are you still waiting for? Act fast! For more information, visit http://regionalenergy.ca.
Did you know that outlets and light switches can be a major source of air leaks? To prevent this, consider insulating them, particularly if they’re positioned on an outside wall. There are numerous types of specialized seals and insulation materials to choose from. And they’re specifically designed for outlets, as well as, switch plates, so you don’t need to worry about fire risks.
Upgrade to Low-Flow Showerheads
Older showerhead models generally put out 5 gallons of water per minute. On the other hand, low-flow showerheads put out a mere 1.5 gallons per minute and still allow you to enjoy forceful showers.
Even more, they’re easy to install. If you want something more efficient and affordable, then go for a low-flow showerhead. It will help conserve water and save substantial amounts of water every day.
Insulate Water Heaters
Did you know that insulating an older water heater could help you save up to 9 percent on water heating costs? Well, now you know. Insulating hot water heater jackets can prevent standby heat losses by 25 to 45 percent, allowing you to heat your water easily and more efficiently.
Why you should install a Smart HVAC Based System
The HVAC system accounts for more than half of the energy consumed in your home. That’s why a fault system is likely to increase the overall energy consumption in homes. However, with proper maintenance, you can lower these energy bills and still have comfort in your home. So, if you are planning to install an HVAC system in your home, keep reading. Among other things, you will learn about the benefits associated with installing smart based HVAC systems in your home.
Lowers Electricity Bills
Energy bills can be annoying, especially when they skyrocket. Even more, the global energy sector is strained. That’s why energy costs keep on increasing. But does this mean letting nature take its course? No. You can do something to lower these bills. In particular, switching to a smart based HVAC system can be your answer as far as reducing the energy bills in your home is concerned.
One of the biggest pluses of these smart HVAC systems is superior temperature variability. With a smart system, you have an HVAC that will give you the power to control tempt variability according to your needs. This means that users can cool and heat specific rooms effectively without moving from space top space. This saves time and gives you an easy time as you relax or go about your activities.
Another good thing about smart systems is that they give you access to smarter air. Remember, the quality of air is important when it comes to your health. And that’s where smart HVAC systems come in. With these systems, you have a solution that will reduce stuffiness as well as drafts. So, if these are the things that you are looking in an HVAC system, then go the smart way.
You Can Access Then Remotely
Smart technology gives users access to their systems from remote settings. This means that even if you are at work, you can still monitor the functioning of your system. Thus, it’s possible to set the temperature of your room from your workplace before reaching home. This not only reduces energy costs but also improves the overall efficiency.
Why Utility Bills Keep On Increasing
The dreaded energy bill is coming. It can be annoying. If you are unlucky, it will deflate your bank account. Of course, you can try several measures to control the energy budget. However, things may not work out, especially if you don’t pay close attention to your HVAC system. According to research, the HVAC is responsible for almost half of the energy costs in homes. Thus, if you need to bring these bills down, work on your HVAC system. It’s one of the best starting points. So, if you have been wondering why your monthly bills are steadily increasing, sit back. Here are the top reasons why your energy bills are not going down any time soon.
Age has a big say when it comes to the performance of your HVAC system. An old system tends to be less efficient. This means that it will work more to cool or heat any space. So, if your system has served you for years, expect the bills to continue going up. Similarly, a poorly maintained HVAC system tends to be inefficient. This means that it will consume more energy and pump up energy costs. However, don’t let these factors continue draining your money.
You can install a new HVAC system and drive the bills down. If you have the cash, consider going for a smart system. It’s efficient, convenient, and highly reliable. Also, consider maintaining your system on a regular basis. Consult with your heating and cooling contractor to schedule maintenance. According to experts, it’s advisable to do it twice per year.
The operating costs at a particular time can influence the amount you pay towards offsetting your energy bills. For instance, systems that were developed in the 1990s are less efficient than their modern counterparts. This can be attributed to the emergence of technological advancement. For instance, sensors have made these systems more smart and efficient. Thus, they consume less amount of energy, which plays a key role in bringing the energy bills down. Customers are advised to install the newest HVAC systems to bring the energy bills down.
Features also play a key role when it comes to cutting down energy costs. Modern systems come with sophisticated features that make them more efficient. For instance, the efficiency standards of modern equipment are on an upward trajectory. This means that modern systems have superior performance and efficiency than their older counterparts. Standard such as SEER, HSPF, as well as Annual Fuel Utilization is important in determining the efficiency of any system. Also, energy features like variable-speed fans, heat exchange technology, as well as variable speed based compressors can make your system more efficient.
The Locality’s Climate
Your local climate can also increase or lower the amount of money you pay towards energy bills. For instance, if you are located in an extremely cold setting, you will need more energy to heat the interiors. Consequently, your energy bills will be higher. On the other hand, those located in extremely hotter environments will spend more money to cool the interiors.
Also, the following additional factors play a key role when it comes to the energy bills of any home.
The thermostat and other control settings in your system
How the unit was installed
Maintenance levels of your system
The level of insulation in any home
Windows, doors, and other openings in your home.
Are you looking for quick ways to reduce your energy bills? Well, there are actually several measures you can undertake to minimize your electricity costs. According to http://www.regionalenergy.ca/alberta-natural-gas-company/, these measures include insulating outlets and switches, installing a programmable thermostat, insulating your water heater, and installing a low-flow showerhead. Doing this will go a long way in reducing your utility bills and saving you junks of money.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.