If you’re looking to join the green movement and install solar panels on your home, we’ve got the perfect article to share and help you learn if you should make the solar investment.
1. The cost of installing solar panels
Installing solar panels is going to be slightly costly. One of the reasons behind this is that scaffolding will have to be placed around your home, and roofers will need to attach fixings to your rafters.
It’s important to discuss with your solar panel installer before proceeding with the installation. Still, a surveyor should visit your home to help you understand all the costs associated with installing solar panels.
The size of your home will also change the price of solar panels as a larger house tends to use more electricity and will require more panels. This increases the costs, and your solar panel installer will explain any extra hidden costs behind the solution. You may also qualify for free solar panels so don’t forget to go through the government’s renewable energy grants schemes.
Once installed, solar panels do not require much maintenance and should last for a long time. However, you may run into problems over the years and need pigeon proofing solar panels to avoid birds from nesting underneath and a general clean every few years, adding some maintenance costs.
Our recommendation is to contact as many solar panel installers as possible and ask for quotes from all of them. Then, compare the quotes you have received and a breakdown of the expected energy savings from your solar panels and make an educated decision if solar panels are the correct solution to your energy problems. The initial investment can be costly, but over time you should make that back with savings.
2. Is your home suitable for solar panels?
Depending on which country you live in and the angle of your roof, your home may be more suitable for solar panels than others. However, you should never install solar panels on a home that receives relatively no sunlight due to shade caused by trees, buildings and any other object.
Other factors to consider is that if you work in an office, you will not receive the full benefits of the panels
Some countries such as the UK require planning permission for solar panels to be installed on listed buildings or buildings within conservation areas.
3. Problems with your solar panels
Commonly, you may run into a solar panel problem during the time you have them in your home; the most common problem highlighted tends to be the inverter which causes no usable energy to be transmitted from your system.
Other common solar panel issues include birds nesting under solar panels, panels building up dirt, electrical problems and isolator problems.
Most issues can be resolved by yourself, but the main problem is finding out the cause of the case. Which usually means you have to call in a solar panel installer or expert.
If you’re still undecided on solar panels for your home, don’t feel pressured; solar panels are a costly and lengthy investment, and you have to be sure that you want to go ahead with the acquisition.
Installing solar panels in homes is becoming more popular due to increase in the efficiency and availability of solar panels, besides the public concern for environmental preservation. According to experts, “green” energy should eventually replace the traditional sector of the world economy. Solar panels for the home combines several modules of photovoltaic cells that convert solar energy into electrical energy.
The excess energy generated by solar panels during the day is stored and used when needed. Batteries can be used as a backup power source in the absence of a centralized power supply. They allow significant cost savings when utility rates are too high. For example, the price of residential electricity in 2022 averages 14.6 cents per kilowatt hour (kWh), up 6.1% from 20211.
Solar energy accounts for 3.7% of global electricity production and this figure will steadily increase over time2. According to statistics, every second buyer of solar panels is interested in purchasing them in addition to the system already working in the house. These energy sources are a long-term and significant investment in home improvement. Therefore, the service life of a home solar panel is an important factor for manufacturers and buyers. Manufacturers must ensure that their products are reliable and durable.
Most homeowners prefer power system brands that supply the best solar batteries with a guarantee of reliability and durability. The service life of home energy storage is 5 to 15 years. Solar panels are made from recyclable materials with a guarantee of their operation for 25 years. They can be replaced after the warranty period of use.
Factors Affecting the Lifespan of Home Solar Panel
The service life of solar panels is an important factor for both manufacturers and owners. It shows how the modules are durable, reliable and make it easy to produce power when needed. The lifespan of solar energy storage devices is affected by the following factors:
1. Degradation of panels (gradual loss of efficiency of modules)
The duration of their operation depends on the degradation factor of the solar energy storage. This indicator is influenced by the manufacturability and quality of the manufacturer’s products. The best manufacturers estimate the annual power loss of the solar panel in the amount of 0.8-1%. This guarantees the buyer that in 20-25 years his solar installation will produce at least 80-85% of the originally installed power rating per year of production.
2. Features of the operation of the solar battery
The life span of a solar panel depends on the cycle of use. The solar panel is a deep cycle unit that can discharge up to 80% of stored energy before recharging. Batteries charge level depends on characteristics such as model and size, which increase their potential. When buying a device, you should pay attention to the manufacturer’s depth of discharge (DoD): the larger it is, the longer the battery will last.
3. The impact of adverse environmental factors
The relevant environmental factors include difference in night and day temperatures, the influence of ultraviolet radiation, overheating in the daytime, strong gusts of wind. When the air temperature rises, the material of the battery expands, and when the ambient temperature drops, it contracts. Such a temperature difference leads to the formation of microcracks on the panel, which reduces its performance. The air temperature and excessive ultraviolet radiation eventually destroy the hermetic elements of the module, causing loss of their elasticity and mechanical damage.
4. Properties of the material from which the module is made
Polycrystalline systems wear out more than mono crystalline modules. The payback period for batteries made from polycrystalline modules is much faster. However, they also require replacement faster after 25 years of operation. This is especially true for solar panels of the middle and low price segment. Therefore, polycrystalline modules are not recommended to buy and install.
5. Type of solar battery
According to the chemical composition, lead-acid, lithium-ion, salted (with sea water) batteries are distinguished. Among them, lithium-ion panels are characterized by greater depth of discharge (DoD), durability, lightness and compactness3.
6. Heating temperature of the solar battery
The battery pack lasts longer in moderate ambient temperatures. In this case, it is better to install it on the roof of the house. At low temperatures, the battery will work fine if it is operated in a garage or basement. The higher the air temperature, the more the solar panels power generation performance decreases in summer.
7. Quality assurance and regular maintenance of the solar battery
They play a leading role in ensuring the durability of the device. Manufacturers must guarantee the performance and life expectancy of a solar power system. Regular maintenance always costs less than replacing or buying a new battery. For example, maintenance of a battery costs between $150 and $300 per year, but you can spend $100 to $3,200 to repair it4.
In addition to these factors, the performance of a solar station is affected by the presence of a shadow, the orientation and angle of inclination of the batteries, the quality of design and installation work carried out by the installer. When choosing a contractor who will mount your station, you should contact companies with experience in the field of solar energy. A professional installation company will offer you solar energy system maintenance and repair service.
timely cleaning of panels after snow sticking to them;
avoid damage or scratches to the module;
protection from strong winds by barrier structures;
regular cleaning of panels from dirt and dust with water from a hose;
continuous battery charging, as a battery that is not charged for a long time wear out prematurely;
regulation of the optimal number of batteries in the solar system, which contributes to its uniform charging.
The solar company Aion.solar offers a full range of services from materials for the production of home energy systems to their installation. Convince yourself of the efficiency and quality of home solar installations offered by this company.
Installing solar panels can seem like a daunting task, but it’s really not that difficult. In this article, we will walk you through the steps involved in installing solar panels on your home or business. We’ll also give you some tips to make the process go as smoothly as possible. So let’s get started!
Step 1: Mount Installation
The first step when installing solar panels is to mount the panels on your roof. This may require hiring a contractor to help you with the installation. Make sure to choose a qualified contractor who has experience installing solar panels.
The mounting system will depend on the type of roof you have. If you have a tiled roof, you will need to use special mounts that attach to the tiles. If you have a metal roof, you can use clamps to attach the panels to the roof.
Step 2: Install the Solar Panels
The solar panels must be connected to an inverter, which converts the DC current produced by the solar panels into an AC current that can be used in your home. The inverter must be installed in a location that is protected from the elements.
Step 3: Do Electrical Wiring
You will need to run a wire from the solar panel to your home’s electrical system. The easiest way to do this is to run the wire through the roof and into your attic. Make sure you have a sturdy roof that can support the weight of the solar panel.
You will also need to drill a hole in your attic so that you can run the wire through it. Make sure the hole is big enough for the wire to fit through easily.
Step 4: Connect the System to Solar Inverter
Once you have your solar panel system set up, you need to connect it to a solar inverter. This device converts the direct current (DC) produced by the solar panels into alternating current (AC), which is what most home appliances use. The inverter should be placed near your breaker box so that it can easily send power to your home’s electrical system.
Step 5: Connect Solar Inverter and Solar Battery
After the solar panels are installed, you need to work with a solar inverter company to connect the solar inverter and solar battery. The solar inverter converts the DC power from the solar panels into AC power, which is the type of power that is used in homes. The solar battery stores energy from the solar panels so that you can use it at night or on cloudy days.
To connect the solar inverter, first turn off the main power to your home. Then, connect the positive and negative wires from the solar inverter to the positive and negative terminals on the solar battery.
Step 6: Connect Solar Inverter to the Grid
After your solar panels are installed, you will need to connect the solar inverter to the grid. This will allow you to sell excess energy back to your utility company. The solar inverter will also monitor your system and provide alerts if something goes wrong.
To connect the solar inverter to the grid, you will need to have an electrical permit. You will also need to have your utility company inspect your system before it can be connected to the grid. Once your system is connected, you will be able to start generating solar power!
Step 7: Start Solar Inverter
Locate the Start Solar Inverter button on the inverter’s front panel. This button is rectangular and has a small solar icon in the center.
Press and hold the Start Solar Inverter button for three seconds.
The inverter will startup, and the LCD screen will display the current operating status of the inverter.
Now that your solar panels are installed, you can start generating electricity! Simply follow these steps to get your inverter up and running. With a little help from the sun, you’ll be powering your home in no time.
Installing solar panels is not as difficult as one might think. In most cases, the panels can be mounted on the roof of a home or building. The process of installing solar panels usually starts with mounting the panels in an area that will receive the most sunlight. Once the panels are in place, wires are run from the panels to a power inverter. The power inverter converts solar energy into electricity that can be used by the home or building.
Finally, the system is connected to the electrical grid so that any excess electricity can be sold back to the utility company.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.